Loading ...
Loading ...
Loading ...
4
Danger of burns!!
• Do not touch hot surfaces i.e. body or
lid. Use handles or knobs.
• Avoid contact with steam coming out
of the spout when pouring, and out of
the lid or spout when relling.
Please note:
• Ensure that your mains supply voltage
is the same as that marked on the
underside of your kettle.
• Do not remove the lid while the kettle
is boiling.
• Remove the plug from the mains
socket when not in use and before
cleaning. Allow the kettle to cool
before cleaning.
• Remove the kettle from its power base
before lling.
• Never move the kettle while it is in use.
• Do not use the kettle for any purpose
other than heating water.
• De’Longhi will not accept any liability
if the appliance is subject to improper
use, or failure to comply with these
instructions.
• Position the kettle properly on the
power base before switching on.
• Use the kettle only with the power
base supplied (and vice versa).
• Do not operate this kettle if the mains
lead or plug is damaged, if the kettle
malfunctions, or has been damaged in
any manner. Please contact Customer
Experience, see enclosed guarantee.
• The power cable must not be replaced
by the user as this requires the use
of special tools. If the supply cord
is damaged, it must be replaced by
the manufacturer. Please contact
Customer Experience, see enclosed
guarantee
• If the kettle is overlled, boiling water
may overow.
The appliance complies with the
following EC directive:
- Materials and accessories coming
into contact with food conform to EC
regulation 1935/2004.
SERVICE AND CUSTOMER CARE
• If the cord is damaged it must, for safety reasons, be
checked by Delonghi Customer Experience.
• Please refer to the enclosed guarantee leaet for service
and assistance details.
USE
Using for the rst time
• Before use, check that the appliance has not been
damaged during transport.
• Remove all packaging from the kettle and power base.
• Remove any labels from the outer surfaces except the
rating label.
• Remove the lter by pulling it up (g. 1) and wash it
with water (g. 2) (refer to page 7 “Removing the scale
lter”).
• Fill the kettle to the max level and boil.
• The boiled water should be discarded and the kettle
rinsed out with cold water. This procedure should be
carried out twice to remove any manufacturing dust,
2
1
Loading ...
Loading ...