Loading ...
Loading ...
Loading ...
ADJUSTING DEPTH OF CUT
I _ WARNING: ",'ourrouter should NEVER turned ON or be connected to
the power source when you are assembling parts, making adjustments,
Installing or removing toilets / nuts, cutter bite, cleaning or when it is not
in use. Disconnecting the router will prevent occidental starting, which could
cause serlous personal lnjury_
PLUNGING ACTION (Fig. 6)
The plungebasefeature slmplffles depth edtuatmentsand allows thecuttingblt to be
accurately |owered down Intothe workplacefor morepreciseset-ups.
To tower the cattingbit, release theptunge_lockleverby movingit "Up"
to the unlocked posff!on.
Apply an evendownward preBsura on the plungeaction untilthe bit reaches the desired
depth, thenmovethe plunge-locklever "Down"to the locked position.
To raise the bitand the plungeeotlon
unlockthe plungetook Ieverend the
bitand plungeaction wlti
automatically retractfrom Fig. 6
the workplaceand returnto the
raisedposition.
Alwayshave the plungeaction
In the raisedpositionand locked
whenthe blt Is not cutltng
tn theworkplace.
S]otCutting
18
Loading ...
Loading ...
Loading ...