Loading ...
Loading ...
Loading ...
*Temperature Setting
Notes: depending on the loading and settings chosen, it takes 24ours for the
beverage cooler temperature to stabilize. During this time, the LED
temperature display may seem to move erratically. This is a normal process.
This process occurs whenever the setting is modified and/or whenever a large
amount of cans or bottles are added to the beverage cooler. In the event of a
power interruption, all previous temperature settings are automatically erased
and it will revert to the pre-set temperature setting.
Important: The LCD displays by default the actual internal air temperature. It’s
important to understand that there is a difference between the air temperature
inside the beverage cooler and the actual temperature of the beverages” You
will need to wait approximately 12 hours before noticing the effects of
temperature adjustment due to the critical mass within a full beverage cooler.
Once the thermostat is set it is strongly advised not to adjust it frequently. The
thermostat will maintain the temperature inside the beverage cooler within a
+/- 2.5 ºC range, the actual temperature of the beverages will only fluctuate 0.5
ºC to 1 ºC.
1) Beverage Cooler Control panel:
The LCD displays the internal air temperature. The desired temperature can
be adjusted by pressing Set button and then Up and Down buttons, the
temperature setting can be adjusted from 0 ºC to 10 ºC. Press Set button, the
set temperature will temporarily flash in the LCD display for 5 seconds.
Cooling Indicator light: When the light is on, the cooling mode is
currently in operation.
Loading ...
Loading ...
Loading ...