Loading ...
Loading ...
Loading ...
If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the
checklist below.
Any other servicing should be done by an authorized service representative.
Ifappliance is not working as it should, has beendropped, damaged, left outdoors, or dropped intowater, take
it to a service center prior to continuing use.
WARNING,&
To reduce risk of personal injury - Unplug before cleaning or servicing.
PROBLEM POSSIBLECAUSE POSSIBLESOLUTION
Cleaner won't run.
2. No voltage in wall plug. 2. Check fuse or breaker in home.
Low suction.
Hose nozzle stops
spraying liquid
during use.
Hose nozzle will
not spray after
filling the Clean
Water Tank or
Detergent Con-
tainer.
Hose nozzle will
not spray after
priming pump.
Clean water won't
dispense.
Solution won't
dispense
Brushes won't
rotate during floor
cleaning.
4. Fuse in cleaner blown. 4. Taketo service center.
2. Blockage Intool on end of
hose.
4. Dirty Water Tank Debris Filter
Clogged.
kay:i:
6. Recovery Tank not properly
secured.
2. Remove tool and clear blockage.
4. See "How to Clean" page 5.
6. Replace Recovoery Tank as per instructions
on page 9.
tor i i
:;
1. Air is trapped in the pump 1. Turn on the cleaner. If hose does not spray,
and hose. prime the pump by lowering the hose down to
the floor and hold the trigger for up to 1 minute.
1. Clean Water Tank not firmly 1. Make sure tank is securely locked in
_nplace. ?osition.
1.Mode knob is in"Rinse 1.Turn Knob to "Wash".
Mode".
17 Actual model may vary from images shown.
Loading ...
Loading ...