Loading ...
Loading ...
Loading ...
TECHNICAL DATA
Recommended cutting equipment for USA
Following is a list of recommended cutting equipment for McCulloch chain saw model CS 380.This chainsaw model
equipped with either of the listed bar and saw chain combination(s), fulfills the requirements according to ANSI B175.1 -
2000 (Gasoline Powered Chain Saws - Safety Requirements).
The following list is the chain saw manufacturers recommendations. There may be other combinations available, which
will also achieve kickback reduction.
Chain saw model McCulloch CS 380 met the kickback performance requirements of ANSI B 175.1-2000 when tested
with the combinations of bars and saw chains listed below.The saw chains McCulloch H37, Husqvarna H37 and Oregon
91 PX are also classified as a low kickback saw chain since they met the requirements for low kickback saw chain outlined
in ANSI B 175.1-2000. We recommend to use only the listed combinations of bars and chains for chain saw model
McCulloch CS 380. Other chain saw models may not meet the kickback requirements when equipped with the listed bar
and chain combinations.
Recommended cutting equipment for Canada
Following is a list of recommended cutting equipment for the McCulloch chain saw model CS 380. The listed
combination(s) of powerhead, bar and saw chain meet all requirements outlined in Canadian Standards Assosiation
Z62.1-03 (Chain Saws) and Z82.3-04 (Chain Saw Kickback).
Furthermore the saw chains McCulloch H37, Husqvarna H37 and Oregon 91PX are evaluated and listed as Type C Low
Kickback Saw Chains according to the provisions in Z82.3-04.
Kickback information
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
The following cutting attachments are approved for the model McCulloch CS 380.
Length, inch
14
18
18
Pitch, inch
3/8
Guide bar
Gauge, inch
0.080
Max. nose radius
7T
Saw chain
Type Drivelink count
52
McOulloch H37,
Husqvarna H37, 58
Oregon 91PX
62
Saw chain filing and file gauges
inch/rnrn
5/32"/4,0
5/32"/4,0
inch/mm
37,9tPX 60 ° 30 ° 0 ° 0.025"_,65
36 60 ° 30 ° 0 ° 0.025"/0,65
Husqvarna
5796536=01
Husqvarna
5056981=38
1154654-27 Rev.1 2012-03-15 English - 27
Loading ...
Loading ...
Loading ...