Loading ...
Loading ...
Loading ...
5
• To change the speed, swipe or tap the slider control at any time. Tapping + will change to
full speed; tapping – will change the speed to minimum.
• When you have nished, tap C then unplug the blender. Always wait till the blades come
to a stop before removing the lid from the jug, or removing the jug from the motor unit.
PULSE OPERATION
For control over blending consistency, use the pulse/ice crush
*
icon.
1. Tap C to activate the control panel.
2. Tap the
*
icon to enter pulse/ice crush mode. The
*
icon will ash.
3. Tap the
*
icon again and keep your nger on it. The blender will run at maximum speed
for as long as you keep your nger in contact with the
*
icon. Release your nger to stop.
ICE CRUSH
Tip: Add a little water to the ice cubes.
1. Place the ice cubes into the jug and t the lid. Don’t add too many ice cubes or you may
overload your blender. Add a little water to help the crushing process.
2. Tap C to activate the control panel.
3. Tap the
*
icon to enter pulse/ice crush mode. The
*
icon will ash.
4. Tap the
*
icon again and keep your nger on it. The blender will run at maximum speed
for as long as you keep your nger in contact with the
*
icon. Release your nger to stop.
WHEN YOU HAVE FINISHED
1. Switch o (C), and wait till the blades come to a stop before removing the lid from the jug,
or removing the jug from the motor unit.
USING THE ADAPTIVE BLENDING PROGRAMMES
1. Tap C to activate the control panel.
2. Tap the desired function icon then tap the ashing + icon.
3. Your blender will rst sense the level of resistance of the ingredients for about 3 seconds
and then adapt the programme accordingly.
Button Function
%
Smoothie - blend frozen fruits and other ingredients into thick smoothies
^
Icy drink - liquefy frozen drinks.
&
Soup - use for making soups.
NOTES
• The Smoothie, Icy drink and Soup programmes will run then stop automatically. The lights
on the slider control act as a guide to show where the programme is in the blending cycle.
Once all of the lights have gone out, the programme will stop.
• The Sensigence blender is programmed to adapt to the level of resistance of the ingredients
within the jug, therefore throughout the blending cycle the speed of the motor may change,
it may stop briey whilst the programme is still running and blending times will dier
depending on the ingredients inside. These adaptions help achieve optimal results.
• To stop a programme at any time, tap @.
• When you have nished, tap C then unplug the blender. Always wait till the blades come
to a stop before removing the lid from the jug, or removing the jug from the motor unit.
Loading ...
Loading ...
Loading ...