Preliminary Notes and Legal
Information
z Take and review some test shots initially to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries
and afliates, and its distributors are not liable for any consequential
damages arising from any malfunction of a camera or accessory,
including memory cards, that result in the failure of an image to be
recorded or to be recorded in a way that is machine readable.
z The user’s unauthorized photographing or recording (video and/or
sound) of people or copyrighted materials may invade the privacy of
such people and/or may violate others’ legal rights, including copyright
and other intellectual property rights. Note that restrictions may apply
even when such photographing or recording is intended solely for
personal use.
z The camera warranty is valid only in the area of purchase. In case of
camera problems while abroad, return to the area of purchase before
contacting a Customer Support Help Desk.
z Although the screen is produced under extremely high-precision
manufacturing conditions and more than 99.99% of the pixels meet
design specications, in rare cases some pixels may be defective
or may appear as red or black dots. This does not indicate camera
damage or affect recorded images.
z When the camera is used over an extended period, it may become
warm. This does not indicate damage.
2
Introduction
z To jump to the beginning of a chapter, click the chapter title along the
right side of the top page.
z For basic page navigation, click the icons at the bottom of each page.
: Go to the top page
: Return to the previous page
: Go back a page
: Go forward a page
z Instructions in this guide apply to the camera under default settings.
z Tabs such as
identify which modes are used in the shooting
instructions. Some features are also available in other modes.
z For tips that make the camera easier to use, click the
icon.
z Text Conventions
z In this guide, icons are used to represent the corresponding camera
buttons and dials on which they appear or which they resemble.
z The following camera controls are represented by icons.
z On-screen icons and text are indicated in brackets.
z
Numbers in some gures and illustrations correspond to numbers in the steps.
z
=
xx: Pages with related information (in this example, “xx” represents
a page number)
z For convenience, all supported memory cards are simply referred to as
the “memory card”.
3
Preliminary Notes and Legal Information ..................................... 2
Introduction .................................................................................. 3
Text Conventions .............................................................................3
Common Camera Operations .................................................... 15
Safety Instructions ...................................................................... 18
Camera Basics ................................................................. 21
Getting Ready ............................................................................ 22
Attaching the Strap ........................................................................22
Charging the Battery Pack .............................................................23
Preparing a Memory Card .............................................................24
Inserting/Removing the Battery Pack and Memory Card ..............25
Setting the Date, Time, Time Zone, and Language .......................27
Holding the Camera ................................................................... 29
Trying the Camera Out ............................................................... 30
Shooting ........................................................................................30
Viewing ..........................................................................................32
Part Names ................................................................................ 33
Front ..............................................................................................33
Back ...............................................................................................34
Viewfinder .................................................................................. 35
Adjusting the Screen Angle ........................................................ 36
Indicator Display ......................................................................... 37
Setting a Shooting Mode ............................................................ 38
Configuring Camera Features .................................................... 39
Quick Control Screen ....................................................................39
Menu Screen .................................................................................40
Features Available on the Quick Control Screen ....................... 42
Menu Settings ............................................................................ 43
Contents
4
Shooting Mode Screen ............................................................... 45
Frames on the Shooting Screen ................................................ 46
Shooting Display Options ........................................................... 47
Playback Display Options .......................................................... 48
Switching Histograms ....................................................................49
On-Screen Keyboard ................................................................. 50
Shooting ............................................................................ 51
Shooting with Camera-Determined Settings
(Auto Mode/Hybrid Auto Mode) .................................................. 52
Shooting in Hybrid Auto Mode .......................................................54
Shooting Panoramas (Panorama Mode) .................................... 55
Shooting Subjects in Motion (Sports Mode) ............................... 56
Shooting Specific Scenes (Special Scene Mode) ...................... 57
Shooting Yourself under Optimal Settings (Self Portrait Mode) ..... 60
Shooting with Image Effects (Creative Filters Mode) ................. 61
Shots Resembling Miniature Models (Miniature Effect) ................. 64
Recording a Variety of Movies (Movie Mode) ............................ 65
Recording Movies at Specific Shutter Speeds and
Aperture Values (Movie Manual Exposure) ...................................65
Shooting in Program AE (P Mode) ............................................. 67
Shooting at Specific Shutter Speeds (Tv Mode) ........................ 68
Shooting at Specific Aperture Values (Av Mode) ....................... 69
Shooting at Specific Shutter Speeds and Aperture Values
(M Mode) .................................................................................... 70
Zooming In Closer on Subjects (Digital Zoom) .......................... 71
Locking Image Brightness / Exposure (AE Lock) ....................... 72
Easily Reacquiring Subjects after Manual Zooming
(Framing Assist – Seek) ............................................................. 73
Display Area Options .....................................................................74
5
Auto Zooming in Response to Subject Movement
(Auto Zoom) ............................................................................... 75
Adjusting the Constant Face Display Size .....................................76
Avoiding Lost Subjects after Zooming In
(Framing Assist – Lock) .............................................................. 77
Disabling Centered Subject Display ..............................................78
Shooting Close-Ups (Macro) ...................................................... 79
Shooting in Manual Focus Mode ................................................ 80
Easily Identifying the Focus Area (MF Peaking) ............................ 81
Shooting with AF Lock ................................................................ 82
Changing Image Quality ............................................................. 83
Capturing in RAW Format ..............................................................83
Changing the Aspect Ratio ......................................................... 84
Changing the Image Display Period after Shots ........................ 85
Changing the Flash Mode .......................................................... 86
Locking Brightness / Exposure in Flash Photography
(FE Lock) .................................................................................... 87
Configuring Flash Settings ......................................................... 88
Adjusting Flash Exposure Compensation ......................................88
Adjusting Flash Output ..................................................................89
Changing the Flash Timing ............................................................ 90
Reducing Red-Eye ........................................................................90
Configuring Safety FE ...................................................................91
Continuous Shooting .................................................................. 92
Using the Self-Timer .................................................................. 93
Adding a Date Stamp ................................................................. 94
Adjusting Image Brightness (Exposure Compensation)............. 95
Auto Exposure Bracketing (AEB Shooting) ...................................96
Changing the ISO Speed ........................................................... 98
Adjusting ISO Auto Settings ..........................................................98
6
Auto Correction of Brightness and Contrast
(Auto Lighting Optimizer) ........................................................... 99
Changing the Metering Method ................................................ 100
Setting the Metering Timer ....................................................... 101
Configuring Exposure Simulation ............................................. 102
Capturing Natural Colors (White Balance) ............................... 103
Custom White Balance ................................................................104
Customizing Colors (Style Settings) ......................................... 105
Shooting with Servo AF ............................................................ 106
Choosing the AF Method .......................................................... 107
Choosing Subjects to Focus On (Tracking AF) ............................107
Moving the AF Point ....................................................................109
Changing the Focus Setting ...................................................... 110
Configuring the AF-Assist Beam ............................................... 111
Changing the IS Mode Settings ................................................112
Correcting Severe Camera Shake ............................................... 112
Using Auto Level .......................................................................113
Using Digital Tele-Converter .....................................................114
Storing the Zoom or MF Position ..............................................115
Changing Movie Recording Size ............................................... 116
Configuring Sound Recording Settings .....................................117
Adjusting the Recording Volume ................................................. 117
Wind Filter ................................................................................... 118
Attenuator .................................................................................... 11 8
Configuring Movie Servo AF .....................................................119
Using Auto Slow Shutter .......................................................... 120
Miniature Model Effect in Movies (Miniature Effect Movie) ...... 121
Recording Video Snapshots ..................................................... 122
Recording Time-Lapse Movies ................................................. 124
7
Configuring Information Display for HDMI Output .................... 125
Setting the Type of Digest Movie ............................................. 126
Playback .......................................................................... 127
Viewing ..................................................................................... 128
Magnifying Images ................................................................... 129
Viewing Digest Movies ............................................................. 130
Finding Images in an Index ...................................................... 131
Editing Movies .......................................................................... 132
Removing the Beginning/End of Movies ......................................132
Extracting Frames of 4K Movies as Stills ....................................134
Editing Digest Movies ..................................................................135
Protecting Images .................................................................... 136
Protecting Multiple Images ..........................................................136
Rotating Images ....................................................................... 138
Erasing Images ........................................................................ 139
Erasing Multiple Images at Once .................................................139
Adding Images to Print Orders (DPOF) ................................... 141
Printing Images Added to the Print Order (DPOF) ......................142
Adding Images to a Photobook ................................................ 143
Correcting Red-Eye .................................................................. 144
Cropping ................................................................................... 145
Resizing Images ....................................................................... 147
Rating Images .......................................................................... 148
Viewing Slideshows ................................................................. 149
Finding Images Matching Specified Conditions ....................... 150
Finding Images with the Main Dial ........................................... 151
Combining Video Snapshots .................................................... 152
Starting Playback from the Last Image Displayed ................... 154
8
Wireless Features .......................................................... 155
Available Wireless Features ..................................................... 156
Saving Camera Images to a Smartphone ................................ 158
Connecting to Smartphones via Wi-Fi with the Wi-Fi Button ....... 161
Restricting Image Viewing ...........................................................164
Features Used with Smartphones ............................................ 165
Sending Images to a Smartphone Automatically as You Shoot ...165
Shooting Remotely as You View a Live Image
on the Smartphone ......................................................................165
Controlling the Camera from a Smartphone ................................ 166
Geotagging Images as You Shoot ...............................................166
Connecting to Printers via Wi-Fi ............................................... 167
Establishing a Connection via an Access Point ........................... 169
Sending Images to a Computer Automatically ......................... 171
Uploading Images to Web Services ......................................... 174
Registering Web Services ...........................................................174
Uploading Images to Web Services.............................................178
Reconnecting via Wi-Fi ............................................................ 179
Ending Wi-Fi Connections ........................................................ 180
Clearing Information of Devices Paired via Bluetooth .............. 181
Changing or Deleting Connection Settings .............................. 182
Function Settings ........................................................... 183
Selecting and Creating Folders ................................................ 184
Changing File Numbering ........................................................ 185
Configuring Auto Rotation of Vertical Images........................... 186
Formatting Memory Cards ....................................................... 187
Configuring the Feature Guide ................................................. 188
Using Eco Mode ....................................................................... 189
Adjusting Power-Saving Features ............................................ 190
9
Adjusting Screen Brightness .................................................... 191
Adjusting the Date, Time, and Time Zone ................................ 192
Changing the Language ........................................................... 193
Setting the Video System ......................................................... 194
Adjusting Beeping .................................................................... 195
Adjusting the Volume ............................................................... 196
Setting the HDMI Output Resolution ........................................ 197
Customizing Zoom Button Functions ....................................... 198
Switching AF Point Selector and AE Lock Button Functions .... 199
Customizing Shooting Information Display .............................. 200
Setting a Priority for Shooting Display Performance ................ 201
Setting the Display Mode ......................................................... 202
Lens Retraction Timing ............................................................ 203
Setting Reverse Display ........................................................... 204
Setting Start-up Screen Display ............................................... 205
Metric / Non-Metric Display ...................................................... 206
Configuring Custom Functions ................................................. 207
Customizing Buttons ....................................................................208
Custom Shooting Modes (C1/C2) ............................................ 209
Restoring Default Camera Settings .......................................... 210
Setting Copyright Information to Record in Images ..................211
Downloading Manuals/Software from a QR Code ................... 212
Displaying Certification Logos .................................................. 213
Saving Commonly Used Shooting Menu Items (My Menu) ..... 214
Renaming My Menu Tabs ............................................................215
Deleting a My Menu Tab ..............................................................215
Deleting All My Menu Tabs ..........................................................216
Deleting All Added Items ..............................................................216
Customizing My Menu Display ....................................................217
10
Accessories .................................................................... 218
Optional Accessories ................................................................ 219
Power Supplies ............................................................................219
Others .......................................................................................... 219
Printers ........................................................................................220
Using Optional Accessories ..................................................... 221
Playback on a TV.........................................................................221
Using a Lens Hood (Sold Separately) .........................................222
Using Lens Filters (Sold Separately) ...........................................223
Shooting Remotely ......................................................................224
Using a Remote Switch (Sold Separately) ..................................225
Using an External Microphone ....................................................225
Saving Images to a Computer .................................................. 226
Printing Images ........................................................................ 227
Tips on Using the Camera ............................................. 229
Camera Basics ......................................................................... 230
Handling Precautions ..................................................................230
Getting Ready ..............................................................................230
Holding the Camera .....................................................................231
Viewfinder ....................................................................................232
Adjusting the Screen Angle .........................................................232
Configuring Camera Features .....................................................232
Frames on the Shooting Screen .................................................. 232
Playback Display Options ............................................................ 233
Shooting ................................................................................... 234
Shooting with Camera-Determined Settings
(Auto Mode/Hybrid Auto Mode) ...................................................234
Shooting Panoramas (Panorama Mode) .....................................237
Shooting Subjects in Motion (Sports Mode) ................................238
Shooting Specific Scenes (Special Scene Mode) .......................238
Recording a Variety of Movies (Movie Mode) ..............................239
11
Shooting in Program AE (P Mode)...............................................240
Shooting at Specific Shutter Speeds (Tv Mode) ..........................241
Shooting at Specific Aperture Values (Av Mode) ......................... 241
Shooting at Specific Shutter Speeds and Aperture Values
(M Mode) .....................................................................................241
Zooming In Closer on Subjects (Digital Zoom) ............................ 242
Locking Image Brightness / Exposure (AE Lock) ........................242
Easily Reacquiring Subjects after Manual Zooming
(Framing Assist – Seek) ..............................................................243
Auto Zooming in Response to Subject Movement
(Auto Zoom) .................................................................................243
Avoiding Lost Subjects after Zooming In
(Framing Assist – Lock) ...............................................................244
Shooting Close-Ups (Macro) .......................................................245
Shooting in Manual Focus Mode .................................................245
Changing Image Quality ..............................................................245
Changing the Flash Mode ...........................................................246
Locking Brightness / Exposure in Flash Photography
(FE Lock) .....................................................................................246
Configuring Flash Settings ..........................................................246
Continuous Shooting ...................................................................247
Using the Self-Timer .................................................................... 247
Adding a Date Stamp ..................................................................248
Adjusting Image Brightness (Exposure Compensation) ..............248
Changing the ISO Speed .............................................................248
Auto Correction of Brightness and Contrast
(Auto Lighting Optimizer) ............................................................. 249
Capturing Natural Colors (White Balance) ..................................249
Shooting with Servo AF ...............................................................250
Choosing the AF Method .............................................................250
Changing the IS Mode Settings ................................................... 251
Using Digital Tele-Converter ........................................................ 251
Storing the Zoom or MF Position ................................................. 251
12
Changing Movie Recording Size .................................................252
Configuring Sound Recording Settings .......................................252
Configuring Movie Servo AF ........................................................ 252
Using Auto Slow Shutter .............................................................. 252
Miniature Model Effect in Movies (Miniature Effect Movie) ..........253
Recording Video Snapshots ........................................................253
Recording Time-Lapse Movies ....................................................254
Playback ................................................................................... 255
Viewing ........................................................................................255
Magnifying Images ......................................................................255
Viewing Digest Movies.................................................................255
Editing Movies .............................................................................256
Protecting Images ........................................................................257
Erasing Images ............................................................................257
Adding Images to Print Orders (DPOF) ....................................... 258
Adding Images to a Photobook ...................................................258
Correcting Red-Eye .....................................................................258
Cropping ......................................................................................258
Resizing Images ..........................................................................258
Rating Images .............................................................................259
Viewing Slideshows .....................................................................259
Finding Images Matching Specified Conditions ...........................259
Combining Video Snapshots .......................................................259
Wireless Features .................................................................... 260
Saving Camera Images to a Smartphone ...................................260
Features Used with Smartphones ...............................................261
Connecting to Printers via Wi-Fi ..................................................262
Sending Images to a Computer Automatically .............................262
Uploading Images to Web Services.............................................262
Function Settings ..................................................................... 264
Selecting and Creating Folders ...................................................264
Changing File Numbering ............................................................ 264
13
Formatting Memory Cards ........................................................... 264
Adjusting Power-Saving Features ...............................................265
Adjusting Screen Brightness .......................................................265
Customizing Shooting Information Display .................................. 265
Configuring Custom Functions ....................................................265
Custom Shooting Modes (C1/C2) ................................................266
Restoring Default Camera Settings .............................................266
Setting Copyright Information to Record in Images ..................... 266
Saving Commonly Used Shooting Menu Items (My Menu) ......... 267
Accessories .............................................................................. 268
Optional Accessories ...................................................................268
Using Optional Accessories ......................................................... 268
Troubleshooting ....................................................................... 270
On-Screen Information ............................................................. 274
When Shooting ............................................................................274
During Playback ..........................................................................276
Precautions for Wireless Features ........................................... 278
Security Precautions ....................................................................279
Third-Party Software ................................................................ 280
Personal Information and Security Precautions ....................... 283
Trademarks and Licensing ....................................................... 284
Disclaimer ................................................................................ 285
Index ........................................................................................ 286
14
Common Camera Operations
Shoot
z Use camera-determined settings (Auto Mode, Hybrid Auto Mode)
-
=
52,
=
54
z Shoot yourself under optimal settings (Self Portrait)
-
=
60
z Shoot panoramas (Panoramic Shot)
-
=
55
Shooting people well
Portraits
(
=
57)
Matching specic scenes
Sports
(
=
56)
Handheld
Night Scene
(
=
57)
Fireworks
(
=
57)
Food
(
=
57)
15
Applying special effects
Smooth Skin
(
=
57)
Monochrome
(
=
61)
Soft Focus
(
=
61)
Fish-Eye Effect
(
=
61)
Like Oil Paintings
(
=
61)
Like Watercolor Paintings
(
=
61)
Toy Camera Effect
(
=
61)
Miniature Effect
(
=
64,
=
121)
z Focus on faces
-
=
52,
=
57,
=
107
z Without using the ash (Flash Off)
-
=
86
z Include yourself in the shot (Self-Timer)
-
=
93
z Add a date stamp
-
=
94
z Movie clips and photos together
-
=
54
View
z View images
-
=
128
z Automatic playback (Slide Show)
-
=
149
z On a TV
-
=
221
16
z Browse through images quickly
-
=
131,
=
150,
=
151
z Erase images
-
=
139
Record/View Movies
z Record movies
-
=
52,
=
65
z View movies
-
=
128
Print
z Print pictures
-
=
141,
=
167,
=
227
Save
z Save images to a computer
-
=
226
Use Wi-Fi Features
z Send images to a smartphone
-
=
158,
=
165
z Print pictures
-
=
167
z Share images online
-
=
174
z Send images to a computer
-
=
171
17
Safety Instructions
z Be sure to read these instructions in order to operate the product safely.
z Follow these instructions to prevent injury or harm to the operator of the product or
others.
WARNING
Denotes the risk of serious injury or death.
z Keep the product out of the reach of young children.
A strap wrapped around a person’s neck may result in strangulation.
z Use only power sources specied in this instruction manual for use with the product.
z Do not disassemble or modify the product.
z Do not expose the product to strong shocks or vibration.
z Do not touch any exposed internal parts.
z Stop using the product in any case of unusual circumstances such as the presence
of smoke or a strange smell.
z Do not use organic solvents such as alcohol, benzine or paint thinner to clean the
product.
z Do not get the product wet. Do not insert foreign objects or liquids into the product.
z Do not insert foreign objects or liquids into the product.
z Do not use the product where ammable gases may be present.
This may cause electric shock, explosion or re.
z
For products featuring a viewnder, do not look through the viewnder at strong light
sources such as the sun on a bright day or lasers and other strong articial light sources.
This may harm your vision.
z Observe the following instructions when using commercially available batteries or
provided battery packs.
- Use batteries/battery packs only with their specied product.
- Do not heat batteries/battery packs or expose them to re.
- Do not charge batteries/battery packs using non-authorized battery chargers.
- Do not expose the terminals to dirt or let them come into contact with metallic pins
or other metal objects.
- Do not use leaking batteries/battery packs.
- When disposing of batteries/battery packs, insulate the terminals with tape or
other means.
This may cause electric shock, explosion or re.
If a battery/battery pack leaks and the material contacts your skin or clothing, ush the
exposed area thoroughly with running water. In case of eye contact, ush thoroughly
with copious amounts of clean running water and seek immediate medical assistance.
18
z Observe the following instructions when using a battery charger or AC adapter.
- Periodically remove any dust buildup from the power plug and power outlet using
a dry cloth.
- Do not plug in or unplug the product with wet hands.
- Do not use the product if the power plug is not fully inserted into the power outlet.
- Do not expose the power plug and terminals to dirt or let them come into contact
with metallic pins or other metal objects.
- Do not touch the battery charger or AC adapter connected to a power outlet
during lightning storms.
- Do not place heavy objects on the power cord. Do not damage, break or modify
the power cord.
- Do not wrap the product in cloth or other materials when in use or shortly after
use when the product is still warm in temperature.
- Do not leave the product connected to a power source for long periods of time.
This may cause electric shock, explosion or re.
z Do not allow the product to maintain contact with the same area of skin for extended
periods of time during use.
This may result in low-temperature contact burns, including skin redness and blistering,
even if the product does not feel hot. The use of a tripod or similar equipment is
recommended when using the product in hot places and for people with circulation
problems or less sensitive skin.
z Follow any indications to turn off the product in places where its use is forbidden.
Not doing so may cause other equipment to malfunction due to the effect of
electromagnetic waves and even result in accidents.
CAUTION
Denotes the risk of injury.
z Do not re the ash near the eyes.
It may hurt the eyes.
z Strap is intended for use on the body only. Hanging the strap with any product
attached on a hook or other object may damage the product. Also, do not shake the
product or expose the product to strong impacts.
z Do not apply strong pressure on the lens or allow an object to hit it.
This may cause injury or damage to the product.
z Flash emits high temperatures when red. Keep ngers, any other part of your body,
and objects away from the ash unit while taking pictures.
This may cause burns or malfunction of the ash.
z Do not leave the product in places exposed to extremely high or low temperatures.
The product may become extremely hot/cold and cause burns or injury when touched.
19
CAUTION
Denotes the possibility of property damage.
z Do not aim the camera at intense light sources, such as the sun on a clear day or an
intense articial light source.
Doing so may damage the image sensor or other internal components.
z When using the camera on a sandy beach or at a windy location, be careful not to
allow dust or sand to enter the camera.
z Wipe off any dust, grime, or other foreign matter on the ash with a cotton swab or
cloth.
The heat emitted from the ash may cause foreign matter to smoke or the product to
malfunction.
z Remove and store the battery pack/batteries when you are not using the product.
Any battery leakage that occurs may cause product damage.
z Before you discard the battery pack/batteries, cover the terminals with tape or other
insulators.
Contacting other metal materials may lead to re or explosions.
z Unplug any battery charger used with the product when not in use. Do not cover with
a cloth or other objects when in use.
Leaving the unit plugged in for a long period of time may cause it to overheat and
distort, resulting in re.
z Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating, or explosion, resulting in
product damage or re.
z If your product uses multiple batteries, do not use batteries that have different levels
of charge together, and do not use old and new batteries together. Do not insert the
batteries with the + and – terminals reversed.
This may cause the product to malfunction.
z When card reading/writing is in progress, do not turn the camera off, open the
memory card/battery cover, or shake or hit the camera.
Doing so may corrupt images or damage the camera or memory card.
z Do not force the memory card into the camera facing the wrong way.
This could damage the camera.
20
Camera Basics
Basic information and instructions, from initial preparations to shooting and
playback.
21
Getting Ready
z Attaching the Strap
1
Attach the included strap to the
strap mount.
2
Attach the lens cap to the strap.
(
1
)
(
3
)
(
4
)
(
5
)
(
2
)
(
1
)
(
1
)
(
2
)
22
z Preparing a Memory Card
Use the following memory cards (sold separately), in any capacity.
z SD memory cards*
1
z SDHC memory cards*
1
*
2
z SDXC memory cards*
1
*
2
*1 Cards conforming to SD standards. However, not all memory cards
have been veried to work with the camera.
*2 UHS-I memory cards are also supported.
24
z Inserting/Removing the Battery Pack and
Memory Card
1
Open the cover.
2
Insert the battery pack.
To remove:
(
2
)
(
1
)
(
1
)
(
2
)
25
z Setting the Date, Time, Time Zone, and Language
1
Turn the camera on.
2
Set the time zone.
z / buttons to choose a time zone →
button
z
button
z
/ buttons to choose a time zone →
button → / buttons to choose [OK]
→
button
27
Trying the Camera Out
Try out the camera by turning it on, shooting some stills or movies, and then
viewing them.
z Shooting
1
Remove the lens cap and turn the
camera on.
z To turn the camera off, press the power
button again.
2
Enter mode.
3
Zoom in or out, as needed.
z Move the zoom lever or press the zoom
buttons as you watch the screen.
When using the flash:
30
4
Focus (press halfway).
z The camera beeps after focusing.
z An AF point is displayed around positions
in focus.
5
Shoot (press fully).
When recording movies:
z [ REC] is displayed during recording.
z To stop movie recording, press the movie
recording button again.
31
z Viewing
1
Press the button.
2
Choose images.
z Movies are labeled with [ ].
When playing movies:
z button (twice)
z Press the / buttons to adjust the
volume.
32
Part Names
z Front
(
8
)
(
11
)
(
12
)
(
10
)
(
13
)
(
14
)
(
6
)(
2
)(
1
) (
5
)(
4
)(
3
) (
7
) (
3
) (
15
) (
16
) (
17
) (
18
)
(
9
)
(1) Zoom lever
Shooting:
(telephoto) /
(wide angle)
Playback:
(magnify) / (index)
(2) Shutter button
(3) Strap mount
(4) Main dial
(5) Mode dial
(6) Flash
(7) Lamp
(8) Speaker
(9) External microphone IN terminal
(10)
(Framing Assist – Seek) button
(11)
(Framing Assist – Lock) button
(12) Zoom button
(13) Lens
(14) Lens hood/filter adapter mount
(15) Serial number
(16) Tripod socket
(17) Memory card/battery cover lock
(18) Memory card/battery cover
33
z Back
(
20
)(
21
) (
19
)
(
12
)
(
11
)
(
5
)(
4
)
(
2
)
(
1
)
(
3
) (
6
) (
7
) (
8
) (
9
) (
10
)
(
13
)
(
17
)
(
18
)
(
14
)
(
15
)
(
16
)
(1) Screen
Opens to the left about 180° and
rotates up and down.
(2) Dioptric adjustment knob
(3) Viewfinder
(4) Microphone
(5) Power button
(6)
(Wi-Fi) button
(7) Indicator
(8) Remote switch terminal
(9) DIGITAL terminal
(10) HDMI™ terminal
(11) Movie recording button
Movies can also be recorded in
modes other than Movie mode.
(12)
button
(13)
(AE lock) button
(14)
(AF point selector) button
(15)
(Exposure compensation) /
Up button
(16)
(Quick Control) button
Displays the Quick Control screen.
Also used to confirm selected
settings.
(17)
(Flash) / Right button
(18)
(Single-image erase) / Down
button
(19)
button
Used to display menu screens.
(20)
(Playback) button
(21)
(Macro) / (Manual focus) /
Left button
34
Indicator Display
The indicator on top remains lit or blinks depending on camera status.
Color Indicator Status Camera Status
Green
On
z Recording stills to the memory card, or
reading stills from the card
Slow blinking
z Display off
Blinking
z Recording movies to the memory card,
or reading movies from the card
z Transmitting via Wi-Fi
37
Setting a Shooting Mode
Use the mode dial to access each shooting mode.
(
10
)
(
8
)
(
9
)
(
11
)
(
12
)
(
4
)
(
3
)
(
5
)
(
6
)
(
2
)
(
1
)
(
7
)
(1) Tv Mode
Set the shutter speed before
shooting (
=
68).
(2) P Mode
Set a variety of settings before
shooting (
=
67).
(3) Auto Mode
Fully automatic shooting, with
camera-determined settings
(
=
52).
(4) Hybrid Auto Mode
Automatically record a clip of the
scene before each shot (
=
54).
(5) Panorama Mode
Create panoramas combining a
series of shots (
=
55).
(6) Sports Mode
Shoot continuously as the camera
focuses on moving subjects
(
=
56).
(7) Av Mode
Set the aperture value before
shooting (
=
69).
(8) M Mode
Set the shutter speed and aperture
value before shooting to obtain the
desired exposure (
=
70).
(9) C1 / C2 Mode
/
Save commonly used shooting
modes and your configured function
settings for reuse (
=
209).
(10) Movie Mode
Record a variety of movies
(
=
65).
(11) Creative Filters Mode
Add a variety of effects to images
when shooting (
=
61).
(12) Special Scene Mode
Shoot with settings for specific
scenes (
=
57).
38
Configuring Camera Features
z Quick Control Screen
1
Press the button.
z (1) Setting items
z (2) Setting options
2
Choose a setting item.
3
Choose a setting option.
z Congure items labeled with a [ ]
icon by pressing the
button.
39
3
Choose a setting item.
z Some items are selected with the /
buttons on a different screen, after you
press the
button initially.
4
Choose a setting option.
5
Complete the setting.
6
Return to the shooting screen.
41
Features Available on the Quick
Control Screen
Press the
button on shooting or playback
screens to access the Quick Control screen,
where you can adjust settings. Choose a setting
item on the right or left to display setting options
for it on the bottom.
(1) Setting items
(2) Setting options
The following settings are available in
mode. Available setting items and
options vary by shooting mode.
AF method
Choose an auto focus (AF) mode for the scene
you are shooting.
AF operation
Choose [
] to keep subjects in focus while
you press the shutter button halfway.
Drive mode* Set up continuous shooting or the self-timer.
Metering mode Choose how brightness is measured.
Image quality*
Choose the size (number of pixels) and
compression (quality) of your shots.
Movie rec. size*
Choose the recording size and frame rate for
movies.
ISO speed Choose the ISO speed.
White balance
Shoot with natural-looking colors under specic
types of lighting.
Style settings
Choose color tone, contrast, and other image
details.
Auto Lighting
Optimizer
Choose the level of auto correction for brightness
and contrast.
Still img aspect ratio* Choose the aspect ratio for stills.
* Also available in mode.
42
Menu Settings
Use menu screens to congure a variety of camera features. To access
menu screens, press the
button. Setting items are organized into
four main groups and multiple tabs for each group.
You can congure the following setting items on menu screens. Available
setting items vary by shooting mode.
Shooting settings
z Shooting mode
z Image quality
z Still img aspect ratio
z Image review
z Flash settings
z Drive mode
z Date stamp
z Expo.comp./AEB
z
ISO speed settings
z
ISO speed settings
z Auto Lighting
Optimizer
z Metering mode
z Metering timer
z Expo. simulation
z White balance
z Custom White Balance
z WB Shift/Bkt.
z Style settings
z HDMI info disp
z AF operation
z AF method
z Continuous AF
z AF-assist beam ring
z MF peaking settings
z Safety MF
z MF-point zoom
z IS settings
z
Auto level
z Digital zoom
z Recall zoom/MF
settings
z Digest type
z
Display area
z
Auto zoom
z
Centering
z Movie rec. size
z Sound recording
z Movie Servo AF
z
Auto slow shutter
z Video snapshot
z Time-lapse movie
z Remote control
43
Playback settings
z Protect images
z Rotate image
z Erase images
z Print order
z Photobook Set-up
z Red-eye correction
z Cropping
z Resize
z Rating
z Slide show
z Set image search
conditions
z Image jump w/
z Create album
z Histogram disp
z View from last seen
Function settings
z Select folder
z File numbering
z Auto rotate
z Format card
z Feature guide
z Eco mode
z Power saving
z Disp. brightness
z Date/Time/Zone
z Language
z Video system
z Beep
z Volume
z HDMI resolution
z
button function
z Switch
/ button
z Shooting info. disp.
z Disp. performance
z Display settings
z Lens retraction
z Reverse display
z Start-up image
z Units
z Wireless
communication
settings
z GPS settings
z Custom Functions
(C.Fn)
z Custom shooting
mode (C1, C2)
z Reset camera
z Copyright information
z Manual/software URL
z Certication Logo
Display
z Firmware
My Menu
z Add My Menu tab z Delete all My Menu
tabs
z Delete all items
z Menu display
44
Shooting Mode Screen
(1) Shooting mode / Scene icon
(2) Recordable shots
(3) Maximum continuous shots
(4) Movie recording time available
(5) Battery level
45
Frames on the Shooting Screen
Frames for focusing (AF points) are displayed on the shooting screen.
White frame
Displayed around the subject or person’s face detected
as the main subject.
Green frame
Displayed after the camera focuses when you press the
shutter button halfway.
Blue frame
Displayed as the camera continues to focus on moving
subjects.
Displayed as long as you press the shutter button
halfway.
Yellow frame
Displayed if the camera cannot focus when you press
the shutter button halfway.
46
Shooting Display Options
You can switch shooting screen display to view other information.
1
Press the button.
47
On-Screen Keyboard
Use the on-screen keyboard to enter information. Use the
/ / / buttons
to choose a key, and then press the
button.
Moving the cursor
z [ ]/[ ]
Switching input modes
z [ ]: Switch to uppercase
z [ ]: Switch to numbers or symbols
Deleting characters
z [ ]
Entering line breaks
z [ ]
Returning to the previous screen
z button
50
Shooting
Easily shoot in simple modes, or take more sophisticated shots using a
variety of features.
51
Shooting with Camera-Determined
Settings (Auto Mode/Hybrid Auto Mode)
Use Auto mode for fully automatic selection of the optimal settings for the
scene, based on the subject and shooting conditions determined by the
camera.
1
Enter mode.
2
Zoom in or out, as needed.
z Move the zoom lever or press the zoom
buttons as you watch the screen.
When using the flash:
3
Focus (press halfway).
52
z Shooting in Hybrid Auto Mode
Also record 2–4 second clips of scenes before each shot automatically, just
by shooting stills. Each clip, which ends with the still image and a shutter
sound, forms an individual chapter. The camera creates a short digest
movie of the day by combining the clips.
1
Enter mode.
2
Focus and shoot.
54
Shooting Panoramas (Panorama Mode)
Create a panorama combining shots captured continuously as you move
the camera one direction while holding the shutter button all the way down.
1
Enter mode.
2
Choose a shooting direction.
z Use the button to choose the direction
you will shoot.
z An arrow is displayed showing the
direction to move the camera.
3
Press the shutter button halfway.
z Keeping the shutter button halfway down,
focus on the subject.
4
Shoot.
z Holding the shutter button all the way
down, move the camera at a constant
speed in the direction of the arrow.
z The area displayed clearly (1) is captured.
z A shooting progress indicator (2) is
displayed.
z Shooting stops when you release the
shutter button, or when the progress
indicator is completely white.
(
1
)
(
2
)
55
Shooting Subjects in Motion (Sports
Mode)
Shoot continuously as the camera focuses on moving subjects.
1
Enter mode.
2
Focus.
z While you are pressing the shutter button
halfway, the camera will continue to
adjust focus and image brightness where
the blue frame is displayed.
3
Shoot.
z Hold the shutter button all the way down
to shoot continuously.
56
Shooting Specific Scenes (Special
Scene Mode)
Choose a mode matching the shooting scene, and the camera will
automatically congure the settings for optimal shots. Try taking some test
shots rst to make sure you obtain the desired results.
1
Enter mode.
2
button → [ ] → choose an option
3
Shoot.
57
Self Portrait
For self-portraits, customizable image
processing includes skin smoothing as well as
brightness and background adjustment to make
yourself stand out.
Portrait
Capture subjects that stand out against a
blurred background, with smooth skin tone and
soft-looking hair.
Smooth skin
Process images to make skin look smoother.
Food
Adjust color tones to make food look fresh and
vibrant.
58
z Shooting Yourself under Optimal Settings
(Self Portrait Mode)
1
Choose [ ].
2
Configure the settings.
z button → / buttons to choose
[Brightness] or [Smooth skin effect] →
/ buttons to set the level → button
z Use the button to set [Background blur].
3
Open the screen.
4
Shoot.
z Hold the camera steady as you shoot,
because the camera shoots twice and
processes the images when you press
the shutter button all the way down with
background blur set to [Auto].
60
Shooting with Image Effects (Creative
Filters Mode)
Add a variety of effects to images when shooting. Try taking some test
shots rst to make sure you obtain the desired results.
1
Enter mode.
2
button → [ ] → choose an option
3
Choose an effect level.
z Use the / buttons to set the level.
4
Shoot.
61
Grainy B/W
Take black and white shots with a rough, gritty
feeling.
Soft focus
Shoot with a simulated soft focus lter effect, for
a gentle ambiance.
Fish-eye effect
Shoot with the distorting effect of a sh-eye lens.
Art bold effect
Make subjects look more substantial, like
subjects in oil paintings.
62
Water painting effect
Soften colors, for photos resembling watercolor
paintings.
Toy camera effect
Shoot images that resemble shots from a toy
camera, with vignetting and different color
overall.
Miniature effect
Create the effect of a miniature model, by
blurring image areas outside a selected area.
63
z Shots Resembling Miniature Models (Miniature
Effect)
1
Choose [ ].
2
Set the area to keep in focus (scene
frame).
z button → / buttons to move
the frame →
button
3
Set the position in focus (AF point).
z / / / buttons to move the AF point
→
button
4
Shoot.
64
Recording a Variety of Movies (Movie
Mode)
Full-featured
mode offers miniature effect movies (
=
121), video
snapshots (
=
122), time-lapse movies (
=
124), and more.
1
Enter mode.
2
Start recording.
z [ REC] is displayed during recording.
z To stop movie recording, press the movie
recording button again.
z Recording Movies at Specific Shutter Speeds
and Aperture Values (Movie Manual Exposure)
Set the shutter speed, aperture value, and ISO speed before recording.
1
button → [ ] → choose [ ]
z Press the button.
65
Shooting at Specific Shutter Speeds
and Aperture Values (M Mode)
Set the shutter speed and aperture value before shooting to obtain the
desired exposure.
1
Enter mode.
2
button → set the ISO speed
3
Set the shutter speed and aperture
value.
z Shutter speed: dial
z Aperture value: button → dial
4
Shoot.
70
Zooming In Closer on Subjects
(Digital Zoom)
When distant subjects are too far away to enlarge using the optical zoom,
use digital zoom for up to about 260x enlargement.
1
Press the zoom lever or zoom
button toward .
z Keep pressing the lever or button.
z Zooming stops at the largest zoom factor
before the image becomes noticeably
grainy, which is then indicated on the
screen.
2
Press toward again.
z The camera zooms in even closer on the
subject.
z (1) is the current zoom factor.
(
1
)
71
Locking Image Brightness / Exposure
(AE Lock)
Exposure can be locked when shooting stills and recording movies, or focus
and exposure can be set separately.
2
1
Without AE lock AE lock
1
Aim at a subject for fixed exposure.
2
Press the button.
z [ ] is displayed, and the exposure is
locked.
z This setting is unlocked automatically
after the metering timer (
=
101) runs
out.
3
Compose the shot and shoot.
z AE is unlocked once [ ] is no longer
displayed.
72
Easily Reacquiring Subjects after Manual
Zooming (Framing Assist – Seek)
If you lose track of a subject while zoomed in, you can nd it more easily by
temporarily zooming out.
1
Press and hold the button.
z The camera zooms out and displays
a white frame around the area shown
before you pressed the
button.
2
Aim the camera so that the subject
enters the white frame.
3
Release the button.
z The camera zooms in to ll the screen
with the area that was in the white frame
in step 2.
73
z Display Area Options
The area shown after the
button is pressed can be adjusted.
1
[ Display area]
74
Auto Zooming in Response to Subject
Movement (Auto Zoom)
The camera automatically zooms in and out to keep a detected face
(
=
107) at a constant size. If the person moves closer, the camera
automatically zooms out, and vice versa. This size can also be adjusted.
1
Press and release the button
quickly.
z [ ] is displayed.
z A white frame is displayed around the
detected face, and the camera zooms
in and out to keep the subject on the
screen.
z When multiple faces are detected, a
white frame is displayed around the main
subject’s face and up to two gray frames
around other faces.
2
Shoot.
z Auto zooming is canceled when you
press the
button again, and [ Auto:
off] is displayed.
75
z Adjusting the Constant Face Display Size
z With [ Auto: on], press the / buttons
to choose the desired option.
z The camera zooms automatically to keep
faces at the specied size.
Auto
Auto zoom to prevent subjects from moving off the screen.
When multiple faces are detected, the camera zooms to
keep these subjects on the screen.
Face Keep faces large enough to show facial expressions clearly.
Upper body Keep faces small enough to show the person’s upper body.
Whole body Keep faces small enough to show the person’s entire body.
Manual
Keep faces at the size specied by moving the zoom lever.
Release the zoom lever once the desired size has been
obtained.
76
Avoiding Lost Subjects after Zooming
In (Framing Assist – Lock)
The camera can reduce camera shake after you zoom in and can center
your subject to help you avoid losing it.
1
Zoom in toward the telephoto end
and press the button.
z [ ] is displayed, and the camera applies
image stabilization for shooting at the
telephoto end.
2
Choose a subject to keep near the
center.
z [ ] is displayed in the center of the
screen.
z Aim the camera so that [
] is on the
subject, and then press the
button or
press the shutter button halfway.
77
Shooting in Manual Focus Mode
When focusing is not possible in AF mode, use manual focus. To make
focusing easier, magnify the display.
1
Set the camera to manual focus.
z Use the button to choose [ ].
z [ ] and the MF indicator are displayed.
2
Focus.
z Using the MF indicator (1, which shows
distance and focal position) as a guide,
press and hold the
/ buttons to set
the general focal position.
z Briey press the
/ buttons to ne-
tune the focal position as you watch
the magnied display. To adjust the
magnication, press the
button.
z To move the enlarged area, press the
button and then use the / / /
buttons. To return it to the center, press
the
button.
3
Shoot.
(
1
)
80
Shooting with AF Lock
The focus can be locked. After you lock the focus, the focal position will not
change even when you release your nger from the shutter button.
1
Lock the focus.
z With the shutter button pressed halfway,
press the
button.
z The focus is now locked, and [ ] and
the MF indicator are displayed.
2
Compose the shot and shoot.
z To unlock the focus, press the button
again, and choose [
] or [ ].
82
Changing Image Quality
Choose from ve combinations of size (pixel count) and compression
(image quality). Also specify whether to capture images in RAW format.
1
button → [ ] → choose an
option
z Capturing in RAW Format
The camera can capture images in JPEG and RAW format.
RAW images are “raw” data, before processing to create JPEGs.
1
[ ] → press the button
2
Choose the method of shooting in
RAW.
83
Changing the Aspect Ratio
The image aspect ratio (ratio of width to height) can be changed.
1
button → [ ] → choose an
option
84
Changing the Image Display Period
after Shots
How long images are shown after shots is adjustable.
1
[Image review]
Off No image display after shots.
2 sec., 4 sec.,
8 sec.
Images are displayed for the specied time. Even while
the shot is displayed, you can prepare for the next shot by
pressing the shutter button halfway again.
Hold
Images are displayed until you press the shutter button
halfway.
85
Changing the Flash Mode
You can change the ash mode to match the shooting scene.
1
Press the button to choose a flash
mode.
Auto ash Fires automatically in low-light conditions.
Flash on Fires for each shot.
Slow synchro
Fires to illuminate the main subject (such as people)
while shooting at a slower shutter speed to illuminate
backgrounds out of ash range.
Flash off For shooting without the ash.
86
Locking Brightness / Exposure in
Flash Photography (FE Lock)
Retain the ash output level.
FE lock Without FE lock (overexposed)
1
Raise the flash and set it to [ ] or
[ ].
2
Aim at a subject for fixed exposure.
3
Press the button.
z The ash res, a circle is displayed
showing the metering range, and [
] is
displayed, indicating that the ash output
level has been retained.
4
Compose the shot and shoot.
87
2
Set the amount of compensation.
z / buttons
z Adjusting Flash Output
Choose from three ash levels in
/ / modes.
Flash output: Minimum Flash output: Maximum
1
[Flash mode] → [Manual]
2
[Flash output]
89
z Changing the Flash Timing
The timing of ash ring relative to shutter release is adjustable.
1st curtain 2nd curtain
1
[Shutter sync.]
1st curtain The ash res immediately after the shutter opens.
2nd curtain The ash res immediately before the shutter closes.
z Reducing Red-Eye
To help prevent red-eye, the camera can illuminate the red-eye reduction
lamp before ring the ash in low-light shots.
1
[Red-eye lamp]
90
Using the Self-Timer
With the self-timer, you can include yourself in group photos or other timed
shots. The camera will shoot about 10 seconds after you press the shutter
button all the way down. By setting the timer to two seconds, you can also
avoid any camera shake from pressing the shutter button.
1
button → [ ] → [ ] or [ ]
2
Shoot.
z Focus on the subject and press the
shutter button all the way down.
z Once you start the self-timer, the lamp
will blink and the camera will play a
self-timer sound.
93
Adding a Date Stamp
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so conrm
beforehand that the date and time are correct (
=
27).
1
[Date stamp ] → [Date] or [Date
& time]
2
Shoot.
z As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
94
Adjusting Image Brightness
(Exposure Compensation)
Standard exposure set by the camera for stills or movies can be adjusted in
1/3-stop increments in a range of ±3 stops.
Set toward − Set toward +
1
Set the exposure compensation.
z button → dial
2
Compose the shot and shoot.
95
z Auto Exposure Bracketing (AEB Shooting)
Three images are captured at different exposure levels. Bracketing width
is adjustable in 1/3-stop increments in a range of ±2 stops, centered on the
exposure compensation level.
Underexposure Overexposure
1
[Expo.comp./AEB]
2
Configure the settings.
z Exposure compensation: / buttons
z AEB: dial
96
3
Shoot.
z Over a series of three images captured
as you press the shutter button, exposure
is adjusted relative to the level set
in step 2, from standard exposure to
underexposure to overexposure.
z When
[Drive mode] is set to [High
speed continuous] or [Low speed
continuous], three images are captured
each time you hold the shutter button all
the way down, before the camera stops
shooting.
97
Changing the ISO Speed
Set the ISO speed to [AUTO] for automatic adjustment to suit the shooting
mode and conditions. Otherwise, set a higher ISO speed for higher
sensitivity, or a lower value for lower sensitivity.
1
button → [ ] → choose an option
z Adjusting ISO Auto Settings
You can limit the maximum ISO speed set automatically.
1
[ ISO speed settings] → [Max
for Auto]
98
Changing the Metering Method
Adjust the metering method (how brightness is measured) to suit shooting
conditions.
1
button → [ ] → choose an option
Evaluative
metering
For typical shooting conditions, including backlit
shots. Automatically adjusts exposure to match the
shooting conditions.
Spot metering
Metering restricted to within the [
] (Spot AE Point
frame), displayed in the center of the screen.
Center-weighted
average
Determines the average brightness of light across
the entire image area, calculated by treating
brightness in the central area as more important.
100
Setting the Metering Timer
You can adjust the metering timer period, which determines how long
exposure is displayed (AE lock).
1
[Metering timer]
101
Configuring Exposure Simulation
With exposure simulation, image brightness more closely matches the
actual brightness (exposure) of your shots. Image brightness changes in
response to exposure compensation. Do not use this feature if you prefer
image display at standard brightness, which is usually easier to see.
1
[Expo. simulation]
102
Capturing Natural Colors (White Balance)
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
Daylight Cloudy Tungsten light
1
button → [ ] → choose an option
To adjust white balance
z button → / / / buttons
To set white balance bracketing
z button → dial
z Three images are captured per shot,
each with different color tones.
103
z Custom White Balance
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
1
Shoot a white object.
z Focus and shoot with a plain white object
lling the screen.
z Press the
button.
2
[ ] → [ ]
3
[Custom White Balance]
4
Load the white data.
z Select your image from step 1 →
button → [OK]
z Use the button to return to the
shooting screen.
104
Customizing Colors (Style Settings)
Choose color settings that express scenes or subjects well.
1
button → [ ] → choose an
option
To adjust contrast, saturation, or
other settings
z [ ] → button → choose an
option →
/ buttons
105
Choosing the AF Method
Choose a method of auto focusing (AF) for the subject and scene you are
shooting.
1
button → [ ] → choose an
option
+Tracking
Shoot with the focus on the face of the main subject, as
determined by the camera. Subjects are tracked within a
certain range.
Tracking AF Shoot after choosing a subject to focus on.
Spot AF Autofocus with an AF point smaller than for 1-point AF.
1-point AF
The camera focuses using a single AF point. Effective
for reliable focusing.
z Choosing Subjects to Focus On (Tracking AF)
1
[ ]
z [ ] is displayed in the center of the
screen.
107
2
Choose a subject to focus on.
z Aim the camera so that [ ] is on the
desired subject, and then press the
button.
z When the subject is detected, [
] is
displayed. Even if the subject moves, the
camera will continue to track the subject
within a certain range.
z If no subject is detected, [
] is displayed.
z To cancel subject selection, press the
button again.
3
Shoot.
z Press the shutter button halfway. [ ]
changes to a blue [
], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
(
=
106).
z Press the shutter button all the way down
to shoot.
z Even after your shot, [
] is still displayed
and the camera continues to track the
subject.
108
Changing the Focus Setting
Continuous AF constantly focuses on subjects the camera is aimed at, even
when the shutter button is not pressed. This setting can be changed to limit
autofocusing to the moment you press the shutter button halfway.
1
[Continuous AF]
Enable
Helps avoid missing sudden photo opportunities,
because the camera constantly focuses on subjects
until you press the shutter button halfway.
Disable
Conserves battery power, because the camera does
not focus constantly. However, this may delay focusing.
110
Configuring the AF-Assist Beam
The lamp lights up to help you focus when you press the shutter button
halfway in low-light conditions. You can congure whether the beam is
activated.
1
[AF-assist beam firing]
111
Changing the IS Mode Settings
Image stabilization is adjustable.
1
[IS settings] → [IS mode]
Off Deactivates image stabilization.
On
Optimal image stabilization for the shooting conditions
is automatically applied.
Shoot only
Image stabilization is active only at the moment of
shooting.
z Correcting Severe Camera Shake
Counteract severe camera shake, such as when recording movies while
moving. The portion of images displayed changes more than for [Standard],
and subjects are further enlarged.
1
[Dynamic IS] → [High]
112
Using Auto Level
Auto leveling helps keep movies straight as you record them. Once
recording begins, the display area may narrow, and subjects may be
enlarged.
1
[ Auto level]
113
Using Digital Tele-Converter
The focal length of the lens can be increased by approximately 1.6x or 2.0x.
This can reduce camera shake because the shutter speed is faster than it
would be if you zoomed (including using digital zoom) in to the same zoom
factor.
1
[Digital zoom] → [1.6x] or [2.0x]
z The view is enlarged and the zoom factor
is displayed.
114
Configuring Sound Recording Settings
Several sound recording settings are available.
1
[Sound recording]
z Adjusting the Recording Volume
When set to [Auto], the recording level (volume) is automatically adjusted
during recording. If you prefer to adjust the level manually to suit the scene,
change it to [Manual].
1
[Sound rec.] → [Manual]
2
[Rec. level]
z button → / buttons
117
z Wind Filter
Noise from windy recording sites can be reduced with the wind lter. If there
is no wind, recordings may sound unnatural when this option is used. In this
case, set [Wind lter] to [Disable].
1
[Wind filter/Attenuator] → [Wind
filter]
z Attenuator
The attenuator can prevent audio distortion at noisy recording sites. Three
options are available: [Enable], [Disable], or [Auto] for automatic activation/
deactivation as needed.
1
[Wind filter/Attenuator] →
[Attenuator]
118
Using Auto Slow Shutter
Specify whether to reduce the shutter speed automatically under low light
when recording [
], [ ], [ ], or [ ] movies.
1
[ Auto slow shutter]
Enable
Enables you to record movies that are brighter and less
affected by image noise by automatically reducing the
shutter speed to 1/30 sec. under low light.
Disable
Enables you to record movies with smoother, more
natural movement, less affected by subject shake than
when set to [Enable]. Note that under low light, movies
may be darker than when set to [Enable].
120
Miniature Model Effect in Movies
(Miniature Effect Movie)
Miniature effect movie
Creates the effect of a miniature model in
movies, by blurring image areas outside a
selected area.
1
button → [ ] → choose an
option
2
Set the area to keep in focus (scene
frame).
z button → / buttons to move
the frame →
button
3
Set the position in focus (AF point).
z / / / buttons to move the AF point
→
button
4
Start recording.
z Press the shutter button halfway to focus,
and then press the movie recording button.
121
Recording Video Snapshots
Record a series of 4, 6, or 8 sec. video snapshots, and the camera will
combine them to create a video snapshot album that shows these highlights
of your trip or event.
1
[Video snapshot] → [Video
snapshot] → [Enable]
2
Configure the settings.
Playback time Choose the video snapshot playback time.
Playback effect Choose the video snapshot playback effect.
Show conrm msg
Choose whether to display a conrmation message
after each video snapshot is recorded.
z The time required to record a video
snapshot ([Time required]) is displayed,
based on [Playback time] and [Playback
effect].
z After your rst video snapshot is
recorded, in [Album settings], you can
choose which album to save your next
video snapshot to.
122
3
Start recording.
z Press the button to return to
the shooting screen, and then press the
movie recording button.
z A bar showing the elapsed time
is displayed, and recording stops
automatically when nished.
4
Save to an album.
z This message is not displayed if you set
[Show conrm msg] to [Disable] in step 2,
and the video snapshot is automatically
saved to the album you selected in
[Album settings] in step 2.
z Repeat steps 3–4 as needed.
5
Stop recording video snapshots.
z button → [ ] → [ ]
123
Recording Time-Lapse Movies
Time-lapse movies combine images that are shot automatically at a
specied interval. Any gradual changes of the subject (such as changes in a
landscape) are played back in fast motion.
1
[Time-lapse movie] → [Time-
lapse] → [Scene *]
2
Configure the settings.
z Set the shooting interval and other
settings.
3
Start recording.
z Use the button to return to the
shooting screen.
z Press the shutter button halfway to focus,
and then press the movie recording
button.
124
Configuring Information Display for
HDMI Output
Specify whether to show on-screen information over images in HDMI
output.
1
[HDMI info disp]
With info
Information display is included in HDMI output as movies are
recorded. No image is shown on the camera. Movies can be
recorded on the camera.
Clean /
output
HDMI output consists only of 4K content, without information
display. On the camera, information display is shown over
images. Movies cannot be recorded on the camera.
Clean /
output
HDMI output consists only of Full HD content, without
information display. On the camera, information display
is shown over images. Movies cannot be recorded on the
camera.
125
Setting the Type of Digest Movie
Specify whether digest movies recorded in
mode include stills.
1
[Digest type]
Include stills Digest movies include both stills and clips.
No stills
Digest movies include only clips. Stills are not recorded
in the movies.
126
Enjoy browsing through your shots, and nd and edit images in several
ways.
z To prepare the camera for these operations, press the
button to
switch to playback.
Playback
127
Finding Images in an Index
By displaying multiple images in an index, you can quickly nd the images
you are looking for.
1
Move the zoom lever toward .
z Display more images: Zoom lever toward
z Display fewer images: Zoom lever toward
2
Find the images.
z / / / buttons or dial
3
Choose an image.
z button
131
Editing Movies
z Removing the Beginning/End of Movies
You can remove unneeded portions from the beginning and end of movies
(except digest movies (
=
54) and video snapshots (
=
122)).
1
Choose a [ ] movie.
2
button → [ ]
3
Choose [ ].
z During playback, press the button to
choose [
].
z The movie editing panel and editing bar
are displayed.
132
4
Specify portions to cut.
z Choose [ ] or [ ].
z To view the portions you can cut
(identied by [
] on the screen), press
the
/ buttons to move [ ] or [ ]. At
the position to cut, press the
button.
5
Review the edited movie.
z Playback: [ ]
z Cancel editing: button
6
Save the movie.
z [ ] → [New le]
z Save a compressed version: [ ] →
[OK]
133
z Extracting Frames of 4K Movies as Stills
Frames of your choice in [
] or [ ] movies can be saved as
stills.
1
Choose a frame to extract.
z During playback, press the button, and
then use [
] or [ ] to choose a frame.
2
Save the image.
z [ ] → [OK]
134
z Editing Digest Movies
Individual chapters (clips) (
=
54) recorded in mode can be erased.
Be careful when erasing clips, because they cannot be recovered.
1
Choose [ ] images.
2
button → [ ]
3
Choose a clip.
z During playback, press the button, and
then use [
] or [ ] to choose a clip.
4
Erase the selected clip.
z [ ] → [OK]
135
Protecting Images
Important images can be selected and protected to prevent accidental
erasure from the camera.
Protected images are labeled with a
icon.
1
Choose an image.
2
button → [ ] → [Enable]
z Protecting Multiple Images
You can choose multiple images to protect at once.
1
[Protect images]
2
Choose images.
136
Selecting images individually
z [Select images] → choose an image →
button → button
Selecting a range
z [Select range] → choose the rst image
→
button → choose the last image →
button → button
Selecting all images in a folder
z [All images in folder] → choose a folder
→ [OK]
Selecting all images on a card
z [All images on card] → [OK]
137
Rotating Images
Change the orientation of images and save
them.
1
Choose an image.
2
button → [ ] → choose an option
138
Erasing Images
Unneeded images can be erased. Be careful when erasing images,
because they cannot be recovered.
1
Choose an image.
2
Press the button.
z Choose the erasure option → button
z Erasing Multiple Images at Once
You can choose multiple images to erase at once.
1
[Erase images]
2
Choose images.
139
Selecting images individually
z [Select and erase images] → choose an
image →
button
z The image is labeled with [ ].
z button → [OK]
Selecting a range
z [Select range] → choose the rst image
→
button → choose the last image →
button → button → [OK]
Selecting all images in a folder
z [All images in folder] → choose a folder
→ [OK]
Selecting all images on a card
z [All images on card] → [OK]
140
Adding Images to Print Orders (DPOF)
Set up batch printing (up to 400 images) or ordering prints from a photo
development service (up to 998 images) by choosing the images on a
memory card and the number of copies. The printing information you
prepare this way will conform to DPOF (Digital Print Order Format)
standards.
1
[Print order]
2
Add images to the print list.
Choosing images.
z [Sel.Image] or [Multiple] → choose
images and the number of copies
z Press the
button to return to the
printing screen.
Other settings
z [Set up] → choose an item → choose an
option
z Press the
button to return to the
printing screen.
141
z Printing Images Added to the Print Order
(DPOF)
1
Connect the camera to a PictBridge-
compatible printer.
z The playback screen is displayed.
z button → [Print order]
2
Print the images.
z [Print] → [OK]
142
Adding Images to a Photobook
Photobooks can be set up by choosing up to 998 images on a memory
card.
1
[Photobook Set-up]
2
Choose images.
Choosing images individually
z [Select images] → choose an image →
button → button
Selecting a range
z [Multiple] → [Select range] → choose the
rst image →
button → choose the last
image →
button → button
Selecting all images in a folder
z [Multiple] → [All images in folder] →
choose a folder → [OK]
Selecting all images on a card
z [Multiple] → [All images on card] → [OK]
143
Cropping
You can specify a portion of an image to save as
a separate image le.
1
button → [ ]
2
Adjust the cropping area.
z Reduce the frame: Zoom lever toward
Enlarge the frame: Zoom lever toward
z Move the frame: / / / buttons
z Straighten the image: dial → [ ] →
button → dial
z Change the aspect ratio: dial →
[
] → button
z Preview the image: dial → [ ] →
button
145
Rating Images
Organize images by rating them on a scale of 1 – 5.
1
Choose an image.
2
button → [ ] → choose an option
z Choose multiple images: button →
choose an item
z [Select range]: Choose the rst image →
button → choose the last image →
button →
button → dial to
set the rating → [OK]
z [All images on card]:
dial to set the
rating → [OK]
148
Finding Images Matching Specified
Conditions
Find images quickly on a memory card full of images by ltering image
display according to your specied conditions.
1
button → [ ]
2
Specify conditions.
z Item: / buttons
z Option: / buttons
3
Complete the setting.
z button → [OK]
z Matching images are displayed in yellow
frames.
To cancel filtered display
z button → [ ] → button →
button → [OK]
150
Finding Images with the Main Dial
Use the
dial to nd and jump between images quickly according to
your specied conditions.
1
button → [ ] → choose an option
2
Find the images.
z dial
151
Combining Video Snapshots
Combine video snapshots to create a new movie (album).
1
[Create album]
2
Specify video snapshots.
z Choose a movie (an existing album) →
button →
button → [OK]
3
Edit the album.
z Video snapshots in the movie selected in
step 2 are displayed.
z Choose an item in the editing menu at the
bottom and press the
button.
z Along the top of the screen, choose
video snapshots to edit, and edit them as
needed.
152
Rearrange video
snapshots
Rearrange video snapshots. Choose a video
snapshot to move and press the
button. To
move it, use the
/ buttons.
Remove video
snapshot
Choose video snapshots to exclude from the
new album. Video snapshots labeled with a
[
] icon are not included in the new album, but
they are not deleted from the original album.
Play video snapshot
Play the selected video snapshot.
Finish editing
Exit album editing.
4
Exit editing.
z Press the button to return to the
editing menu.
z Choose [
] to exit editing.
5
Save the album.
z Choose [Save].
z To add background music, choose
[Background music].
z Choose [Preview] to preview the album
you edited.
153
Starting Playback from the Last Image
Displayed
You can specify whether to show the last image displayed when you switch
to the playback screen.
1
[View from last seen]
Enable
The last image displayed on the playback screen is
displayed.
Disable The most recent image is displayed.
154
Available Wireless Features
(3) Print from Wi-Fi printers(1) Connect to smartphones
(2) Send images to a computer
automatically
(4) Upload to Web services
(1) Connect to smartphones (
=
158,
=
165)
Control the camera remotely and browse images on the camera
over a Wi-Fi connection by using the dedicated Camera Connect
app on smartphones or tablets.
You can also geotag images and use other features when connected
by Bluetooth
®
*.
For convenience in this guide, smartphones, tablets, and other
compatible devices are collectively referred to as “smartphones”.
* Bluetooth low energy technology (hereafter referred to as “Bluetooth”)
(2)
Send images to a computer automatically (
=
171)
With Image Transfer Utility 2, camera images can be automatically
sent to a computer connected via Wi-Fi.
156
(3) Print from Wi-Fi printers (
=
167)
Print images over a Wi-Fi connection from printers compatible with
PictBridge (wireless LAN) technology.
(4)
Upload to Web services (
=
174)
Share images with friends or family on social media or the CANON
iMAGE GATEWAY online photo service for Canon customers after
you complete member registration (free of charge).
157
Saving Camera Images to a Smartphone
Images on the camera can be saved to a Bluetooth enabled smartphone
connected via Wi-Fi.
Prepare the smartphone as follows.
z The free dedicated Camera Connect app must be installed on the
smartphone.
z For details on this app (supported smartphones and included functions),
refer to the Canon website.
z Camera Connect can be installed from Google Play or the App Store.
You can also access Google Play or the App Store from a QR code that
you can display on the camera when registering the smartphone on the
camera.
z Use the latest version of the smartphone OS.
z Activate Bluetooth and Wi-Fi on the smartphone. Note that pairing with
the camera is not possible from the smartphone’s Bluetooth settings
screen.
1
[Wireless communication
settings]
2
[Bluetooth function]
158
3
[Bluetooth function] →
[Smartphone]
4
Press the button.
5
Enter a nickname and press the
button.
z To use the nickname displayed, press the
button.
6
[OK]
7
[Pairing]
159
8
[Do not display]
9
Start Camera Connect on the
smartphone.
10
Touch the nickname of the camera
for pairing.
11
Touch [Pair] (iOS only).
12
On the camera, choose [OK].
13
Press the button.
z Pairing is now complete, and the camera
is connected to the smartphone via
Bluetooth.
160
14
In Camera Connect, touch [Images
on camera].
z A Wi-Fi connection is established
automatically.
z In iOS, choose [Join] when a message is
displayed to conrm camera connection.
15
Confirm that the devices are
connected via Wi-Fi.
z Images on the camera are listed on the
smartphone.
z [Wi-Fi on] is displayed on the camera.
16
Save images on the camera to the
smartphone.
z Choose listed camera images and save
them to the smartphone.
z Connecting to Smartphones via Wi-Fi with the
Wi-Fi Button
You can also establish a Wi-Fi connection with smartphones from the
button.
1
Press the button.
161
7
Connect the smartphone to the
camera.
z In the smartphone’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
z In the password eld on the smartphone,
enter the password displayed on the
camera.
8
Start Camera Connect on the
smartphone.
9
Select the camera to connect to.
z In the [Cameras] list in Camera Connect,
touch the camera to connect to via Wi-Fi.
10
Establish a Wi-Fi connection.
z [OK] → button
z [ Wi-Fi on] is displayed on the camera.
z The main Camera Connect screen is
displayed on the smartphone.
z The devices are now connected via
Wi-Fi.
163
z Restricting Image Viewing
Restrict the images that can be sent to the smartphone or browsed from the
smartphone.
1
While disconnected from Wi-Fi,
press the button.
2
[ ]
3
Choose [Edit device information],
and then choose the smartphone.
4
Choose [Viewable imgs], and
then specify which images can be
viewed.
164
Features Used with Smartphones
The features described below are available over a wireless connection with
smartphones.
Pair the camera with a smartphone via Bluetooth as described in steps
1–13 of “Saving Camera Images to a Smartphone” (
=
158), and connect
via Wi-Fi as described in steps 1–15.
z Sending Images to a Smartphone
Automatically as You Shoot
Your shots can be automatically sent to a smartphone connected via Wi-Fi.
1
[Wireless communication
settings] → [Wi-Fi settings] → [Send
to smartphone after shot]
2
[Auto send] → [Enable]
z Choose a size in [Size to send].
3
Shoot.
z Your shots are sent to the smartphone.
z Shooting Remotely as You View a Live Image
on the Smartphone
As you view a live image on a smartphone connected via Wi-Fi, you can
shoot remotely.
1
Start Camera Connect.
2
Touch [Remote live view shooting].
165
z Controlling the Camera from a Smartphone
You can control the camera by using a smartphone paired via Bluetooth as
a remote control.
1
Start Camera Connect.
z If connected via Wi-Fi, end the
connection.
2
Touch [Bluetooth remote controller].
z Geotagging Images as You Shoot
Your shots can be geotagged using GPS information (such as latitude,
longitude, and elevation) from a smartphone paired via Bluetooth. On the
playback screen, you can check the location information added to your shots.
On the smartphone, activate location services.
1
Start Camera Connect.
z If connected via Wi-Fi, end the
connection.
2
[GPS settings]
3
[GPS via mobile] → [Enable]
4
Shoot.
z Before shooting, conrm that [ ] and
[
] icons are shown on the camera.
z Your shots are now geotagged.
z From now on, shots you take with
Camera Connect running will be
geotagged.
166
Connecting to Printers via Wi-Fi
Images on the camera can be printed on a printer connected to the camera
via Wi-Fi.
1
Press the button.
2
[ ]
3
[Register a device for connection]
4
Check the SSID and password.
167
5
Connect to the camera from the
printer.
z In the printer’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
z In the password eld on the printer, enter
the password displayed on the camera.
6
Choose the printer.
z Choose the printer to connect to via Wi-Fi
and press the
button.
z Images on the memory card are
displayed after the devices are connected
via Wi-Fi.
7
Choose an image to print.
z Choose an image and press the
button.
z Select or specify the items displayed, and
then print.
168
z Establishing a Connection via an Access Point
The camera can connect to an access point that a printer is connected to, to
print via the access point.
Connect the devices near the access point, because you will need to press
the WPS button.
1
In step 4 of “Connecting to Printers
via Wi-Fi” (
=
167), choose [Switch
network].
2
[Connect with WPS]
3
[WPS (PBC mode)] → [OK]
4
Press the WPS button on the access
point.
169
Sending Images to a Computer
Automatically
Images on the camera can be automatically sent to a computer connected
to an access point (also set up for camera Wi-Fi connections) when the
camera is within range, as when you bring the camera home after shooting.
Connecting via Wi-Fi
1
Connect the computer to the access
point.
z Install Image Transfer Utility 2 on the
computer.
2
Start Image Transfer Utility 2.
3
In Image Transfer Utility 2, access
the pairing settings screen.
z The screen to set up pairing is shown
when you follow the instructions
displayed the rst time Image Transfer
Utility 2 starts up.
4
[Wireless communication
settings] → [Wi-Fi settings]
171
5
[Auto send images to computer] →
[Auto send] → [Enable]
6
[OK]
7
[Connect with WPS] → [WPS (PBC
mode)] → [OK]
8
Press the WPS button.
z Press the WPS button on the access
point to allow the camera to connect.
9
[Auto setting] → [OK]
172
10
Choose a computer.
z Choose a computer for auto image
transfer and press the
button.
11
On the computer, choose the
camera for pairing.
z Camera nicknames are shown on the
pairing screen in Image Transfer Utility 2.
z Choose the camera to connect to and
click [Pairing] to connect the computer
and camera.
Setting Up Auto Image Transfer
12
Specify the sending options.
z For [Auto send images to computer] in
step 5, choose [Image sending options]
and specify the transfer conditions.
13
Turn the camera off.
Sending Images Automatically
z Following the sending options in step 12,
images on the camera are automatically
sent to the computer you are logged in to
when you bring the camera within range
of the access point and turn the camera
on.
173
Uploading Images to Web Services
z Registering Web Services
Use a smartphone or computer to add your Web services to the camera.
z A smartphone or computer with a browser and Internet connection is
required to complete camera settings for CANON iMAGE GATEWAY
and other Web services.
z Visit the CANON iMAGE GATEWAY website for details on versions of
browsers (such as Internet Explorer) and settings required for CANON
iMAGE GATEWAY access.
z For information on countries and regions where CANON iMAGE
GATEWAY is available, visit the Canon website (http://www.canon.com/
cig/).
z For CANON iMAGE GATEWAY instructions and setting details, refer to
the help information for CANON iMAGE GATEWAY.
z To use Web services other than CANON iMAGE GATEWAY, you must
have an account with them. For further details, check the websites for
each Web service you want to register.
z Separate ISP connection and access point fees may apply.
174
Registering CANON iMAGE GATEWAY
Link the camera and CANON iMAGE GATEWAY by adding CANON iMAGE
GATEWAY as a destination Web service on the camera.
Connect the devices near the access point, because you will need to press
the WPS button.
Note that you will need to enter an email address used on your computer
or smartphone to receive a notication message for completing linkage
settings.
1
Press the button.
2
[ ]
3
Accept the agreement to enter an
email address.
z Read the agreement displayed and
choose [I Agree].
4
Establish a connection with an
access point.
z [Connect with WPS] → [WPS (PBC
mode)] → [OK]
z Press the WPS button on the access
point.
z Choose [Auto setting] on the camera’s [IP
address set.] screen.
175
5
Enter your email address.
6
Enter a four-digit number of your
choice.
7
Check for the notification message.
z [OK]
z [
] now changes to [ ].
8
Access the page in the notification
message and complete camera link
settings.
z Follow the instructions to complete the
settings on the camera link settings page.
176
9
Choose [ ].
z CANON iMAGE GATEWAY is now added
as a destination Web service.
Registering Other Web Services
You can also add Web services besides CANON iMAGE GATEWAY to the
camera.
1
Log in to CANON iMAGE GATEWAY
and access the camera link settings
page.
z http://www.canon.com/cig/
2
Follow the on-screen instructions to
complete settings for Web services
you want to use.
3
Press the button to choose [ ].
177
z Uploading Images to Web Services
1
Press the button.
2
Choose the destination.
z Choose a Web service icon.
z If a Web service offers multiple recipients
or sharing options, choose an item on the
screen displayed for selecting recipients.
3
Send an image.
z Choose sending options and upload the
image.
z When uploading to YouTube, read the
terms of service and choose [I Agree].
z After the image is sent, [OK] is displayed.
Press the
button to return to the
playback screen.
178
Reconnecting via Wi-Fi
Reconnecting to devices or Web services via Wi-Fi is possible once the
connection settings are registered.
1
Press the button.
2
From the past connections, choose
a destination.
z If your destination is not shown, press the
/ buttons to switch to other screens.
z For Web services, the connection is now
complete.
3
Prepare the other device.
z Prepare the other device by following the
instructions displayed.
179
Ending Wi-Fi Connections
1
Press the button.
2
[Disconnect,exit] → [OK]
180
Clearing Information of Devices
Paired via Bluetooth
Before pairing with a different smartphone, clear the information about any
connected smartphones.
1
[Wireless communication
settings] → [Bluetooth function]
2
Choose [Check/clear connection
info], and then press the
button.
3
Prepare the smartphone.
z In the Bluetooth system settings, clear
the registered camera information.
181
Changing or Deleting Connection
Settings
Connection settings saved on the camera can be changed or deleted.
Before changing or deleting connection settings, end the Wi-Fi connection.
1
Press the button.
2
Choose an item.
z On the screen at left, you can switch
to other screens by pressing the
/
buttons.
z On the screen at left, choose an item with
connection settings to delete or change.
3
Choose [Edit device information].
z On the screen displayed, choose a
device with connection settings to
change, and then change the nickname
or other information.
182
Make the camera easier to use by customizing or adjusting basic functions.
z These settings are congured on the
and menu tabs. Customize
commonly used functions, for greater convenience.
z These instructions apply to the camera in
mode.
Function Settings
183
Selecting and Creating Folders
You can select or create folders where images are saved. New folders can
be created by selecting [Create folder] on the folder selection screen.
1
[Select folder]
2
Configure the settings.
z Select folders: simply select a folder
z Create folders: [Create folder] → [OK]
184
Changing File Numbering
Your shots are automatically numbered in sequential order (0001–9999)
and saved in folders that store up to 9,999 images each. You can change
how the camera assigns le numbers.
1
[File numbering] → [Numbering]
or [Manual reset]
Continuous
Images are numbered consecutively (until the 9999th
shot is taken/saved) even if you switch memory cards
or folders.
Auto reset
Image numbering is reset to 0001 if you switch memory
cards, or when a new folder is created.
Manual reset
Creates a new folder and starts numbering images from
0001.
185
Configuring Auto Rotation of Vertical
Images
You can change the auto rotation setting that straightens images shot in
vertical orientation when they are displayed.
1
[Auto rotate]
On
Automatically rotate images during playback on both the
camera and computers.
On
Automatically rotate images during playback on
computers.
Off Do not automatically rotate images.
186
Formatting Memory Cards
Before using a new memory card or a card formatted in another device, you
should format the card with this camera.
Low-level formatting may be helpful if the camera is not working correctly,
reading/writing of images on the memory card is slower, continuous
shooting is slower, or movie recording suddenly stops.
Both regular and low-level formatting erase all data on a memory card,
which cannot be recovered.
1
[Format card]
z Format: [OK]
z Low-level format:
button to select
[
] → [OK]
187
Configuring the Feature Guide
Specify whether to display feature guidance when items are selected on the
Quick Control screen.
1
[Feature guide]
188
Using Eco Mode
This function allows you to conserve battery power in shooting modes.
When the camera is not in use, the screen darkens to save battery life.
1
[Eco mode]
On
The screen darkens when the camera is not used for
approximately two seconds; approximately ten seconds after
darkening, the screen turns off. The camera turns off after
approximately three minutes of inactivity.
To activate the screen and prepare for shooting when the
screen is off but the lens is still out, press the shutter button
halfway.
Off Do not use Eco mode.
189
Changing the Language
The current display language can be changed.
1
[Language ]
2
Configure the settings.
z / / / buttons to choose a language
→
button
193
Setting the Video System
Set the video system of any television used for display. This setting
determines the image quality (frame rate) available for movies.
1
[Video system]
NTSC
For areas using the NTSC TV system, such as North
America, Japan, South Korea, and Mexico.
PAL
For areas using the PAL TV system, such as Europe, Russia,
China, and Australia.
194
Adjusting Beeping
Specify whether the camera plays sounds when you press the shutter
button halfway or use the self-timer.
1
[Beep]
195
Adjusting the Volume
Adjust the volume of individual camera sounds.
1
[Volume]
2
Configure the settings.
z button → / buttons
196
Setting the HDMI Output Resolution
Set the output resolution used for camera images when connected to a
television or external recording device with an HDMI cable.
1
[HDMI resolution]
Auto
Images are automatically displayed at optimal resolution for
connected televisions.
1080p
Output at 1080p resolution. Select if you prefer to avoid
display or delay issues when switching resolution.
197
Customizing Zoom Button Functions
Zoom button functions are customizable.
1
[ button function]
Slow zoom Zoom at low speed.
Fast zoom Zoom at high speed.
Set MF dist Set the focal position used in manual focusing.
198
Switching AF Point Selector and AE
Lock Button Functions
Functions performed by the
and button can be switched.
1
[Switch / button] → [Enable]
199
Customizing Shooting Information
Display
You can customize the details and screens of information shown on the
camera or in the viewnder when you shoot. The type of histogram and grid
display are also customizable.
1
[Shooting info. disp.] → [Shooting
info disp settings]
2
Press the / buttons and select
screens.
z For screens you prefer not to display,
press the
button to clear [ ].
z To edit the screen, press the
button.
3
Edit the screen.
z Use the / buttons to navigate items.
z Use the button to add a [ ] next to
items to display.
z Choose [OK] to apply your settings.
200
Setting a Priority for Shooting Display
Performance
You can select the performance option to prioritize in shooting screen
display for stills.
1
[Disp. performance]
Power saving Screen display consumes less power.
Smooth Even quick-moving subjects are displayed smoothly.
201
Setting the Display Mode
You can select the display mode for shooting screens.
1
[Display settings] → [Display
control]
Auto
Normally use the screen for display, but switch to the
viewnder when you look through it.
Manual
With [Manual display], you can restrict display to the screen
or viewnder.
202
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press
the
button in shooting modes. To have the lens retracted immediately
after you press the
button, set the retraction timing to [0 sec.].
1
[Lens retraction]
203
Setting Reverse Display
Specify whether to display a mirror image when shooting with the screen
rotated around toward the front.
1
[Reverse display]
204
Setting Start-up Screen Display
Specify whether to display the start-up screen when you turn the camera
on.
1
[Start-up image]
205
Configuring Custom Functions
Congure Custom Functions for advanced camera customization.
1
[Custom Functions (C.Fn)]
2
Choose an item.
z / buttons → button
3
Configure the settings.
C.Fn I:Exposure
Safety shift
Set to [1:Enable] for automatic adjustment of the
shutter speed and aperture value to bring the
exposure level closer to standard exposure if
standard exposure would not be available otherwise
under your specied shutter speed or aperture value
in
or mode.
C.Fn II:Others
Dial direction
during Tv/Av
The
dial direction for adjusting the shutter speed
or aperture value can be changed.
C.Fn II:Others
Custom Controls
Customize functions of buttons, such as the shutter
button.
207
z Customizing Buttons
Customize functions of buttons, such as the shutter button.
[
] (AE lock button) and [ ] (Framing Assist – Lock button) settings apply
to
/ / / / / / modes.
[
] (shutter button half-press) and [ ] (movie recording button) settings
apply to
/ / / / / modes.
1
[C.Fn II:Others Custom Controls]
2
Choose a button.
3
Choose a function.
208
Custom Shooting Modes (C1/C2)
Save commonly used shooting modes and your congured function settings
for reuse. To access saved settings later, simply turn the mode dial to
or
. Even settings that are usually cleared when you switch shooting modes
or turn the camera off (such as self-timer settings) can be retained this way.
Settings That Can Be Saved
z Shooting modes ( / / / )
z Items set in
/ / / modes
z Shooting menu settings
z Zoom positions
z Manual focus positions (
=
80)
1
Enter a shooting mode with settings
you want to save, and change the
settings as desired.
2
[Custom shooting mode (C1, C2)]
3
[Register settings]
z Choose a custom shooting mode to save
the settings to.
209
Downloading Manuals/Software from
a QR Code
A QR code can be displayed on the camera screen to access a webpage
for downloading instruction manuals and software.
1
[Manual/software URL]
212
Displaying Certification Logos
Some logos for certication requirements met by the camera can be viewed
on the screen.
1
[Certification Logo Display]
213
Saving Commonly Used Shooting
Menu Items (My Menu)
You can save up to six commonly used shooting menu items on the
tab.
By customizing the
tab, you can access these items quickly from a single
screen.
1
[Add My Menu tab] → [OK]
2
[Configure]
3
[Select items to register]
z Choose an item → [OK]
z Your selected items are added to the My
Menu tab.
214
z Deleting All My Menu Tabs
1
[Delete all My Menu tabs]
z Deleting All Added Items
1
[Delete all items]
216
z Customizing My Menu Display
Specify which screen is displayed when the
button is pressed in
shooting modes.
1
[Menu display]
Normal display
Display the most recent menu, as shown for
your previous operation.
Display from My Menu tab
Start display from
tab screens.
Display only My Menu tab
Restrict display to
tab screens.
217
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with
genuine Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents
such as re, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please
note that any repairs your Canon product may require as a result of such
malfunction are not covered under warranty and will incur a fee.
Enjoy the camera in more ways with optional Canon accessories and other
compatible accessories sold separately.
Accessories
218
Optional Accessories
The following camera accessories are sold separately. Note that availability
varies by area, and some accessories may no longer be available.
z Power Supplies
Battery Pack LP-E12
z Rechargeable lithium-ion battery
Battery Charger LC-E12 Series
z Charger for Battery Pack LP-E12
z Others
Interface Cable IFC-600PCU
z For connecting the camera to a computer
or printer
Wireless Remote Control BR-E1
z Bluetooth enabled wireless remote
control
Remote Switch RS-60E3
z Enables remote shutter button operation
(pressing the button halfway or all the
way down).
219
Lens Hood LH-DC90
z Prevents extraneous light outside the
angle of view from entering the lens and
causing ares or ghosting, which reduce
image quality.
Filter Adapter FA-DC67A
z Adapter required when mounting a
67 mm lter.
Canon Lens Filter (67 mm dia.)
z Protects the lens and enables a variety of
shooting effects.
z Printers
Canon PictBridge-Compatible Printers
z Even without using a computer, you can
print images by connecting the camera
directly to a printer.
220
Using Optional Accessories
z Playback on a TV
You can view your shots on a TV by connecting the camera to an HDTV
with a commercially available HDMI cable (not exceeding 2.5 m / 8.2 ft.,
with a Type D terminal on the camera end). You can also shoot while
previewing shots on the larger screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
1
Make sure the camera and TV are off.
2
Connect the camera to the TV.
3
Turn the TV on and switch TV input
to the connected terminal.
4
Switch to playback.
z Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
221
z Using a Lens Hood (Sold Separately)
For wide-angle shots of backlit subjects without using the ash, attach
optional Lens Hood LH-DC90 (sold separately) to prevent light outside the
angle of view from entering the lens.
1
Attach the lens hood.
z Make sure the camera is off.
z Align the lens hood mark (2) with the
camera mark (1), and turn the lens hood
in the direction of the arrow until it locks
in place.
z To remove the lens hood, turn it in the
opposite direction.
z To attach the lens hood inverted (as
shown) when the hood is not used, align
the lens hood mark (2) with the camera
mark (1), and turn the lens hood in the
direction of the arrow until it locks in
place.
(
2
)
(
1
)
(
2
)
(
1
)
222
z Using Lens Filters (Sold Separately)
Attaching a lens lter to the camera protects the lens and allows you to
shoot with various effects. To attach a lens lter, you will need Filter Adapter
FA-DC67A (sold separately).
1
Attach the filter adapter.
z Make sure the camera is off.
z Align the notches on the camera and the
lter adapter and turn the adapter in the
direction of the arrow until locked.
z To remove the lter adapter, turn it in the
opposite direction.
2
Attach a filter.
z Turn the lter in the direction of the arrow
to attach it to the camera.
z Make sure not to attach the lter too
tightly. Doing so could prevent removal of
the lter and damage the camera.
223
z Shooting Remotely
Wireless Remote Control BR-E1 (sold separately) can be used to shoot.
Also refer to the wireless remote control instruction manual for additional
information.
1
Pair the devices.
z [Wireless communication settings] →
[Bluetooth function] (twice) → [Remote]
→ [Pairing]
2
Hold down both the W and T
buttons on the BR-E1 for at least
three seconds.
z The devices are now paired.
3
Set up the camera for remote
shooting.
z Stills: button → [ ] → [ ]
z Movies:
mode → [Remote control]
→ [Enable]
4
Shoot.
z For movie recording, set the remote
control’s release mode/movie shooting
switch to
and press the release button.
224
z Using a Remote Switch (Sold Separately)
An optional Remote Switch RS-60E3 (sold separately) can be used to avoid
camera shake that may otherwise occur when pressing the shutter button
directly. This optional accessory is convenient when shooting at slow shutter
speeds.
1
Connect the remote switch.
z Make sure the camera is off.
z Open the terminal cover and insert the
remote switch plug.
2
Shoot.
z To shoot, turn the camera on and press
the release button on the remote switch.
z Using an External Microphone
To record with an external microphone (
=
33), connect a commercially
available external microphone with a mini plug (3.5 mm diameter) to the
external microphone IN terminal. Note that the built-in microphone is not
used for recording when an external microphone is connected.
1
Open the cover and connect the
external microphone.
225
Saving Images to a Computer
Using Interface Cable IFC-600PCU or a USB cable (both sold separately;
camera end: Micro-B), you can connect the camera to a computer and save
images to the computer. For details on computer connections, refer to the
computer user manual.
1
Make sure the camera is off.
2
Connect the camera to the
computer.
3
Turn the camera on.
4
Save the images to the computer.
z To open images, use preinstalled or
commonly available software.
226
Printing Images
Print your shots by connecting the camera to a PictBridge-compatible
printer with a USB cable (sold separately; camera end: Micro-B).
A Canon SELPHY CP series compact photo printer is used here for the
sake of illustration. Screens displayed and available functions vary by
printer. Also refer to the printer manual for additional information.
1
Make sure the camera and printer
are off.
2
Connect the camera to the printer.
3
Turn the printer on.
4
Switch to playback and choose an
image.
227
5
Access the printing screen.
z button → [Print image]
6
[Print]
228
Tips on Using the Camera
Tips that make the camera easier to use.
229
Camera Basics
Learn about setting up the camera and performing basic camera operations.
z Handling Precautions
z The camera is a high-precision electronic device. Avoid dropping it or
subjecting it to strong impact.
z Never bring the camera near magnets, motors, or other devices that
generate strong electromagnetic elds. Strong electromagnetic elds
may cause malfunction or erase image data.
z If water droplets or dirt adheres to the camera or screen, wipe with
a dry soft cloth, such as an eyeglass cloth. Do not rub hard or apply
force.
z Never use cleaners containing organic solvents to clean the camera or
screen.
z Use a blower brush to remove dust from the lens. If cleaning is difcult,
contact a Customer Support Help Desk.
z Store unused battery packs in a plastic bag or other container. To
maintain battery performance if you will not use the battery pack for
some time, about once a year charge it and then use the camera until it
runs out of power before storing the battery pack.
z Getting Ready
Charging the Battery Pack
z To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
z The charger can be used in areas with 100–240 V AC power
(50/60 Hz). For power outlets in a different format, use a commercially
available adapter for the plug. Never use an electrical transformer
designed for traveling, which may damage the battery pack.
230
z Charged battery packs gradually lose their charge, even when they are
not used. Charge the battery pack on (or immediately before) the day
of use.
Inserting/Removing the Battery Pack and Memory Card
z If you insert the battery pack facing the wrong way, it cannot be locked
into the correct position. Always conrm that the battery pack is facing
the right way and locks when inserted.
z Before using a new memory card or a card formatted in another device,
you should format the card with this camera.
z Recording is not possible on memory cards with a write-protect switch
when the switch is in the locked position. Slide the switch to unlock it.
Setting the Date, Time, Time Zone, and Language
z Set the current date, time, and zone correctly if the [Date/Time/Zone]
screen is displayed when you turn the camera on. Information you
specify this way is recorded in image properties when you shoot, and
it is used when you manage images by shooting date or print images
showing the date.
z To set daylight saving time (1 hour ahead), set [
] to [ ] on the [Date/
Time/Zone] screen.
z If the date/time/zone settings have been cleared, set them again
correctly.
z Holding the Camera
z If you have raised the ash, do not rest your ngers on it.
231
z Viewfinder
z The viewnder display and camera screen cannot be activated at the
same time.
z Some aspect ratio settings will cause black bars to be displayed on the
top and bottom or left and right edges of the screen. These areas are
not recorded.
z Adjusting the Screen Angle
z To protect the screen, always keep it closed and facing the camera
body when the camera is not in use.
z Do not force the screen open any wider, which may damage the
camera.
z Configuring Camera Features
Quick Control Screen
z You can also choose options by turning the dial.
z You can also congure Quick Control features from the Menu screen.
z Frames on the Shooting Screen
z Try shooting in mode if no frames are displayed, if frames are not
displayed around desired subjects, or if frames are displayed in the
background or similar areas.
232
z Playback Display Options
z Overexposed highlights blink over the information display image when
you access screens showing detailed information.
z A graph called a brightness histogram on the top of screens with
detailed information shows the distribution of brightness in images. The
horizontal axis represents the degree of brightness, and the vertical
axis, how much of the image is at each level of brightness. Viewing this
histogram enables you to check exposure.
Switching Histograms
z When switched to the RGB display option, an RGB histogram showing
the red, green, and blue distribution in images appears on screens
with detailed information. The horizontal axis represents R, G, or B
brightness, and the vertical axis, how much of the image is at that level
of brightness. Viewing this histogram enables you to check image color
characteristics.
233
Shooting
Learn about a variety of shooting modes for stills and movies.
z Shooting with Camera-Determined Settings
(Auto Mode/Hybrid Auto Mode)
Still Images
z A blinking [ ] icon warns that images are more likely to be blurred by
camera shake. In this case, mount the camera on a tripod or take other
measures to keep it still.
z If your shots are dark despite the ash ring, move closer to the
subject.
z To assist in focusing, the lamp may be activated when you press the
shutter button halfway in low-light conditions.
z Although you can shoot again before the shooting screen is displayed,
your previous shot may determine the focus, brightness, and colors
used.
Movies
z The black bars on the top and bottom of the screen are not recorded.
z When you recompose shots, the focus, brightness, and colors will be
automatically adjusted.
z Recording stops automatically when the memory card becomes full or a
single recording reaches approx. 29 minutes and 59 seconds.
z Although the camera may become warm when recording movies
repeatedly over an extended period, this does not indicate a problem.
z Keep your ngers away from the microphone while recording movies.
Blocking the microphone may prevent audio from being recorded or
may cause the recording to sound mufed.
z Audio is recorded by the built-in microphone in stereo.
234
z Avoid touching camera controls other than the movie recording button
when recording movies, because sounds made by the camera will be
recorded.
z Once movie recording begins, the image display area changes and
subjects are enlarged to allow for correction of signicant camera
shake. To record subjects at the same size shown before recording,
adjust the image stabilization setting.
z During movie recording, lens operating noises from auto focusing may
also be recorded. If you prefer not to record sound, choose
[Sound
recording] → [Disable].
z Individual movies that exceed 4 GB may be divided into multiple les.
Automatic playback of divided movie les one after another is not
supported. Play each movie separately.
Scene Icons
z In / modes, shooting scenes determined by the camera
are indicated by the icon displayed, and corresponding settings are
automatically selected for optimal focusing, subject brightness, and
color.
z Try shooting in
mode if the scene icon does not match actual
shooting conditions, or if it is not possible to shoot with your expected
effect, color, or brightness.
235
Image Stabilization Icons
z Optimal image stabilization for the shooting conditions (Intelligent IS) is
automatically applied, and the following icons are displayed.
Image stabilization for still images (Normal)
Image stabilization for still images when panning (Panning)*
Image stabilization for angular camera shake and shift-shake
in macro shots (Hybrid IS). For movies, [
] is displayed and
[
] image stabilization is also applied.
Image stabilization for movies, reducing strong camera shake,
as when recording while walking (Dynamic)
Image stabilization for slow camera shake, as when recording
movies at telephoto (Powered)
No image stabilization, because the camera is mounted on
a tripod or held still by other means. However, during movie
recording, [
] is displayed, and image stabilization to
counteract wind or other sources of vibration is used (Tripod
IS).
* Displayed when you pan, following moving subjects with the camera.
When you follow subjects moving horizontally, image stabilization
only counteracts vertical camera shake, and horizontal stabilization
stops. Similarly, when you follow subjects moving vertically, image
stabilization only counteracts horizontal camera shake.
Shooting in Hybrid Auto Mode
z For more impressive digest movies, aim the camera at subjects about
four seconds before shooting still images.
z Battery life is shorter in this mode than in
mode, because digest
movies are recorded for each shot.
z A digest movie may not be recorded if you shoot a still image
immediately after turning the camera on, choosing
mode, or
operating the camera in other ways.
236
z Any sounds and vibrations from your camera or lens operations will be
recorded in digest movies.
z Digest movie image quality is [
] for NTSC or [ ] for PAL.
This varies depending on the video system setting.
z Sounds are not played when you press the shutter button halfway or
trigger the self-timer.
z Digest movies are saved as separate movie les in the following cases
even if they were recorded on the same day in
mode.
- The digest movie le size reaches approximately 4 GB, or the total
recording time reaches approximately 29 minutes and 59 seconds.
- The digest movie is protected.
- Daylight saving time, video system, time zone, or copyright
information settings are changed.
z Recorded shutter sounds cannot be modied or erased.
z Shooting Panoramas (Panorama Mode)
z In some scenes, expected images may not be saved, and images may
not look as expected.
z Shooting may stop midway if you move the camera too slowly or
quickly. However, the panorama created up to that point will still be
saved.
z Images created from shots in
mode are large. Use a computer
or other device to reduce panorama images if you will print them by
inserting a memory card in a Canon printer.
If panoramas are not compatible with certain software or Web services,
try resizing them on a computer.
z The following subjects and scenes may not be stitched correctly.
- Subjects that are moving
- Subjects that are nearby
- Scenes where the contrast varies greatly
- Scenes with long stretches of the same color or pattern, such as the
sea or sky
237
z Shooting Subjects in Motion (Sports Mode)
z Shots may look grainy because the ISO speed is increased to suit the
shooting conditions.
z There may be a delay after continuous shooting before you can shoot
again.
z Shooting may slow down depending on shooting conditions, camera
settings, and the zoom position.
z Continuous shooting is not available in
Auto mode.
z Shooting Specific Scenes (Special Scene
Mode)
Self Portrait
z Areas other than people’s skin may be modied, depending on the
shooting conditions.
z [Smooth skin effect] settings specied in [
] mode are not applied in
[
] mode.
z [Background blur] is set to [Off] and cannot be changed in [
] ash
mode when you have raised the ash.
Smooth Skin
z Areas other than people’s skin may be modied, depending on the
shooting conditions.
z Setting details in [
] mode are not applied in [ ] mode.
Food
z These color tones may not look suitable when applied to people.
z In ash photography, [Color tone] changes to the standard setting.
238
Handheld Night Scene
z Image noise is reduced by combining consecutive shots into a single
image.
z Hold the camera steady as it shoots continuously.
z There will be a delay before you can shoot again, as the camera
processes and combines the images.
z Shots may look grainy because the ISO speed is increased to suit the
shooting conditions.
z Excessive motion blur or certain shooting conditions may prevent you
from obtaining the desired results.
z Try to keep the camera still when using the ash, because the shutter
speed may be slower.
Fireworks
z Mount the camera on a tripod or take other measures to keep it still and
prevent camera shake. Additionally, you should set [IS mode] to [Off]
when using a tripod or other means to secure the camera.
z Although no frames are displayed when you press the shutter button
halfway, optimal focus is still determined.
z Recording a Variety of Movies (Movie Mode)
z Black bars are displayed on the top and bottom edges of the screen in
mode. The black bars indicate image areas not recorded.
z In
mode, the image display area narrows and subjects are enlarged.
z Exposure can be adjusted during recording by pressing the
button
and then pressing the
/ buttons.
z To switch between recording with auto focus and a xed focus, press
the
button before or during recording. (Auto focus is indicated by a
green [○] in the upper left of the [
] icon.)
Note that this icon is not displayed when
[Movie Servo AF] is set to
[Disable].
239
Recording Movies at Specific Shutter Speeds and
Aperture Values (Movie Manual Exposure)
z Some shutter speeds may cause ickering on the screen when
recording under uorescent or LED lighting, which may be recorded.
z When the ISO speed is xed, you can compare your specied value
(where the exposure level indicator moves) to the standard exposure
level by pressing the shutter button halfway. The exposure level
indicator appears as [
] or [ ] when the difference from standard
exposure exceeds 3 stops.
z You can check the ISO speed in [AUTO] mode by pressing the shutter
button halfway. If standard exposure cannot be obtained with your
specied shutter speed and aperture value, the exposure level indicator
moves, indicating the difference from standard exposure. The exposure
level indicator appears as [
] or [ ] when the difference from standard
exposure exceeds 3 stops.
z Shooting in Program AE (P Mode)
z : Program AE; AE: Auto Exposure
z If standard exposure cannot be obtained when you press the shutter
button halfway, the shutter speed and aperture value blink in white. In
this case, try adjusting the ISO speed or activating the ash (if subjects
are dark), which may enable standard exposure.
z Movies can be recorded in
mode as well, by pressing the movie
recording button. However, some items on Quick Control and Menu
screens may be automatically adjusted for movie recording.
z After you press the shutter button halfway, you can adjust the
combination of shutter speed and aperture value by turning the
dial (Program Shift).
240
z Shooting at Specific Shutter Speeds (Tv Mode)
z : Time value
z We recommend deactivating image stabilization when shooting at slow
shutter speeds on a tripod.
z With shutter speeds of 1.3 seconds or slower, ISO speed is [100] and
cannot be changed.
z Blinking display of the aperture value when you press the shutter button
halfway indicates that the standard exposure has not been obtained.
Adjust the shutter speed until the aperture value is displayed in white.
z Shooting at Specific Aperture Values (Av Mode)
z : Aperture value (size of the opening made by the diaphragm in the
lens)
z Blinking display of the shutter speed when you press the shutter button
halfway indicates that the standard exposure has not been obtained.
Adjust the aperture value until the shutter speed is displayed in white.
z Shooting at Specific Shutter Speeds and
Aperture Values (M Mode)
z : Manual
z When the ISO speed is xed, you can compare your specied value
(where the exposure level indicator moves) to the standard exposure
level by pressing the shutter button halfway. The exposure level
indicator appears as [
] or [ ] when the difference from standard
exposure exceeds 3 stops.
z After you set the shutter speed and aperture value, the exposure level
indicator may change if you adjust the zoom or recompose the shot.
z When the ISO speed is xed, screen brightness may change depending
on your specied shutter speed and aperture value. However, screen
brightness remains the same when the ash is up and the mode is set
to [
].
241
z Exposure may not be as expected when the ISO speed is set to
[AUTO], because the ISO speed is adjusted to ensure standard
exposure relative to your specied shutter speed and aperture value.
z Image brightness may be affected by Auto Lighting Optimizer. To keep
the Auto Lighting Optimizer disabled in
mode, add a [ ] mark
to [Disable during man expo] on the Auto Lighting Optimizer setting
screen.
z Calculation of standard exposure is based on the specied metering
method.
z To adjust exposure when ISO speed is set to [AUTO], select a level by
pressing the
button on the exposure level indicator.
z With shutter speeds of 1.3 seconds or slower, ISO speed is [100] and
cannot be changed.
z Zooming In Closer on Subjects (Digital Zoom)
z Using the zoom lever or zoom button will show the current position on
the zoom bar. The zoom bar is color-coded to indicate the zoom range.
- White range: optical zoom range where the image will not appear
grainy.
- Yellow range: digital zoom range where the image is not noticeably
grainy (ZoomPlus).
- Blue range: digital zoom range where the image will appear grainy.
z No blue range is displayed under certain pixel count settings, and you
can zoom in to the maximum level in one zoom operation.
z To deactivate digital zoom, choose
[Digital zoom] → [Off].
z Locking Image Brightness / Exposure (AE Lock)
z AE: Auto Exposure
242
z Easily Reacquiring Subjects after Manual
Zooming (Framing Assist – Seek)
z Some shooting information is not displayed while the camera is zoomed
out.
z The white frame (which roughly shows the area displayed before you
pressed the
button) is not displayed if you press the button
when recording movies. Also note that zooming and the corresponding
camera operating sounds are recorded.
z To shoot at the zoom factor of the guideline screen in the white frame,
press the shutter button all the way down.
z You can adjust the zoom factor that the camera reverts to when you
release the
button by moving the zoom lever to resize the white
frame while you hold the
button.
z The zoom factor cannot be changed with the
button after you press
the shutter button all the way down in self-timer mode.
z Auto Zooming in Response to Subject
Movement (Auto Zoom)
z With [ Auto: on], some shooting information is not displayed, and
some shooting settings cannot be congured.
z A face may not be displayed at a constant size relative to the screen at
some zoom factors, or if the person’s head is tilted or facing the camera
indirectly.
z Because the camera prioritizes zooming to keep subjects on the
screen, it may not be possible to maintain a constant face display size,
depending on subject movement and shooting conditions.
z When a detected subject moves toward the edge of the screen, the
camera zooms out to keep the subject on the screen.
z When no face is detected, the camera zooms to a certain level and
stops zooming until a face is detected.
243
z During movie recording, zooming and the corresponding camera
operating sounds are recorded.
z Auto zooming to keep multiple subjects on the screen is not performed
during movie recording, even if faces are detected.
z Auto zooming is not performed during continuous shooting.
z The zoom factor cannot be changed after you press the shutter button
all the way down in self-timer mode.
Adjusting the Constant Face Display Size
z You can zoom in or out with the zoom lever or zoom button when [Face],
[Upper body], or [Whole body] is selected, but the original zoom factor
will be restored in a few seconds after you release the lever or button.
z You can clear your specied face size during movie recording by
pressing the
button.
z Avoiding Lost Subjects after Zooming In
(Framing Assist – Lock)
z [ ] is displayed once the subject is detected after you press the
button when [
] is displayed in the center of the screen.
z After you recompose a shot, [
] may be displayed in gray if image
stabilization becomes less effective and the subject cannot be centered.
If so, zoom in again, press the
button, and repeat the process for
choosing a subject to center.
z Image stabilization may change the composition of shots after movie
recording begins.
z Some subjects and shooting conditions may prevent you from obtaining
the expected results.
z No image stabilization icon is shown when you press the
button.
z To ne-tune the size of subjects gradually, move the zoom lever while
[
] is displayed.
z The
button has no effect when [Drive mode] is set to [High speed
continuous] or [Low speed continuous], or when connected via Wi-Fi.
244
z Shooting Close-Ups (Macro)
z If the ash res, vignetting may occur.
z In the yellow bar display area below the zoom bar, [
] will turn gray
and the camera will not focus.
z To prevent camera shake, try mounting the camera on a tripod and
choosing
[Drive mode] → [ ].
z Shooting in Manual Focus Mode
z To focus more accurately, try attaching the camera to a tripod to
stabilize it.
z You can also adjust the focal position with the
dial.
z You can start manual focus with magnied display (MF-point zoom).
z Press the shutter button halfway to have the camera ne-tune the focal
position (Safety MF).
Easily Identifying the Focus Area (MF Peaking)
z Colors displayed for MF peaking are not recorded in your shots.
z Changing Image Quality
z [ ] and [ ] indicate different levels of image quality depending on the
extent of compression. At the same size (pixel count), [
] offers higher
image quality. Although [
] images have slightly lower image quality,
more t on a memory card.
Capturing in RAW Format
z RAW shooting is available in / / / / / modes.
z [
] produces RAW images with maximum image quality. [ ]
produces RAW images with more compact le sizes.
z RAW image data cannot be used as-is for viewing on a computer
or printing. You must rst use the Canon application Digital Photo
Professional to convert images to ordinary JPEG or TIFF les.
245
z The le extension for JPEG images is .JPG, and the extension for
RAW images is .CR3. File names of JPEG and RAW images captured
together have the same image number.
z You can also congure this setting in
[Image quality]. To capture
images in both JPEG and RAW format simultaneously, choose [
]
or [
] in [RAW].
z Only JPEG images are captured when [RAW] is set to [−] on the
[Image quality] screen, and only RAW images are captured when
[JPEG] is set to [−].
z Changing the Flash Mode
z If the ash res, vignetting may occur.
z In [
] mode, mount the camera on a tripod or take other measures
to keep it still and prevent camera shake. Additionally, you should set
[IS mode] to [Off] when using a tripod or other means to secure the
camera.
z In [
] mode, even after the ash res, ensure that the main subject
does not move until the shutter sound is nished playing.
z Locking Brightness / Exposure in Flash
Photography (FE Lock)
z FE: Flash Exposure
z [
] blinks when standard exposure is not possible, even if you press
the
button to re the ash. Enable FE lock by pressing the button
when subjects are within ash range.
z Configuring Flash Settings
z You can also access the [Flash settings] screen by pressing the
button and immediately pressing the
button.
246
Changing the Flash Timing
z [1st curtain] is used whenever the shutter speed is 1/100 or faster, even
if you select [2nd curtain].
Configuring Safety FE
z Shots may be captured using settings different from the values
displayed when you press the shutter button halfway.
z Continuous Shooting
z During continuous shooting in mode, focus is locked at the
position determined when you pressed the shutter button halfway.
z Shooting may stop momentarily or continuous shooting may slow down
depending on shooting conditions and camera settings.
z As more shots are taken, shooting may slow down.
z There may be a delay before you can shoot again, depending on
shooting conditions, the type of memory card, and how many shots you
took continuously.
z Shooting may slow down if the ash res.
z Screen display in continuous shooting differs from the images actually
captured and may look out of focus.
z Fewer continuous shots may be available under some shooting
conditions or camera settings.
z Using the Self-Timer
z Even when set, the self-timer has no effect if you press the movie
recording button to start recording.
z More time is required between shots when the ash res or when you
have specied to take many shots. Shooting will stop automatically
when the memory card becomes full.
247
z Adding a Date Stamp
z Shots taken without adding a date stamp can be printed with one as
follows.
However, adding a date stamp this way to images that already have
one may cause it to be printed twice.
- Print using printer functions
- Use camera DPOF print settings to print
z Adjusting Image Brightness (Exposure
Compensation)
Auto Exposure Bracketing (AEB Shooting)
z To clear the AEB setting, set the AEB amount to 0, following the
conguration procedure.
z AEB shooting is available only in
/ / / / / modes without
using the ash.
z If exposure compensation is already in use, the value specied for that
function is treated as the standard exposure level for AEB.
z Changing the ISO Speed
z Although choosing a lower ISO speed may reduce image graininess,
there may be a greater risk of subject and camera shake in some
shooting conditions.
z Choosing a higher ISO speed will increase shutter speed, which
may reduce subject and camera shake and enable sufcient ash
illumination for subjects farther away. However, shots may look grainy.
248
z Auto Correction of Brightness and Contrast
(Auto Lighting Optimizer)
z This feature may increase image noise under some shooting
conditions.
z When the effect of Auto Lighting Optimizer is too strong and images
become too bright, set it to [
] or [ ].
z Images may still be bright or the effect of exposure compensation may
be weak under a setting other than [
] if you use a darker setting for
exposure compensation or ash exposure compensation. For shots at
your specied brightness, set this feature to [
].
z Fewer continuous shots may be available when this setting is set to [
].
z Capturing Natural Colors (White Balance)
z Any correction level you set is retained even if you change the white
balance option.
z On the advanced settings screen for correction, B is for blue, A for
amber, M for magenta, and G for green.
z One level of blue/amber correction is equivalent to about 5 mireds on
a color temperature conversion lter. (Mired: Color temperature unit
representing color temperature conversion lter density)
Custom White Balance
z Capturing a white subject that is too bright or dark may prevent you
from setting the white balance correctly.
z Choose [Cancel] to choose a different image. Choose [OK] to use that
image for loading white data, but note that it may not produce a suitable
white balance.
z Instead of a white object, a gray chart or 18% gray reector
(commercially available) can produce a more accurate white balance.
z The current white balance and related settings are disregarded when
you capture a white subject.
249
z Shooting with Servo AF
z The camera may not be able to shoot while focusing, even if you press
the shutter button all the way down. Keep holding down the shutter
button as you follow the subject.
z Exposure is not locked in Servo AF mode when you press the shutter
button halfway but is determined the moment you shoot.
z Continuous shooting with auto focus is possible by specifying Servo AF.
Note that continuous shooting is slower at this time.
z Depending on the distance to the subject and the subject’s speed, the
camera may not be able to achieve correct focus.
z Choosing the AF Method
z Focusing may take longer or be incorrect when subjects are dark or
lack contrast, or in very bright conditions.
+Tracking
z After you aim the camera at the subject, a white frame is displayed
around the face of the main subject as determined by the camera.
z If no faces are detected when you aim the camera at people, pressing
the shutter button halfway displays green frames around other areas in
focus.
z With the following subjects, faces may not be detected.
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in prole, at an angle, or partly hidden
z The camera may misinterpret non-human subjects as faces.
z Pressing the
button displays [Face select: On], and a face frame
[
] is shown around the face detected as the main subject. Press
the
button again to switch the face frame [ ] to another detected
face. Once you cycle through all detected faces, [Face select: Off] is
displayed and Face Select is canceled.
250
Tracking AF
z [AF operation] is set to [ ] and cannot be changed.
z Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
z [
] is not available.
z To set to [
], press the button and choose [ ].
Moving the AF Point
z You can also return the AF point to the original position in the center by
holding down the
button.
z Changing the IS Mode Settings
z The [IS mode] setting changes to [On] for movie recording, even if
[Shoot only] is set.
z If image stabilization cannot prevent camera shake, mount the camera
on a tripod or take other measures to hold it still. Additionally, you
should set [IS mode] to [Off] when using a tripod or other means to
secure the camera.
z Using Digital Tele-Converter
z The shutter speed at maximum telephoto (when you move the zoom
lever or zoom button all the way toward
) may match the speed when
zooming in to enlarge subjects with digital zoom.
z Storing the Zoom or MF Position
z By choosing [Recall zoom/MF settings] → [MF memory] → [On]
before manually focusing, you can retain the manual focus status for
the next time you turn on the camera.
z In
/ mode, the camera returns to the zoom position where
settings were registered.
251
z Restoring the zoom position is only available in / / / modes.
z With [
Auto: on], the camera does not retain the zoom position from
automatic zooming when the
button is pressed.
z Changing Movie Recording Size
z [ ] and [ ] are only available in mode.
z Subjects appear larger with [
] or [ ] than for other
movie recording sizes.
z If the camera temporarily overheats during extended 4K recording, [
]
is displayed and recording stops. At this time, movie recording will be
unavailable, even if you press the movie recording button. Following
the instructions displayed, either choose a movie recording size other
than [
] or [ ] or turn off the camera to let it cool down
before you resume recording.
z Configuring Sound Recording Settings
Adjusting the Recording Volume
z To restore the original recording volume, choose [Auto] on the recording
screen.
z Configuring Movie Servo AF
z To keep the focus at a specic position, or if you prefer not to record
mechanical sounds from the lens, you can temporarily stop Movie
Servo AF by pressing the
button.
z Using Auto Slow Shutter
z Set to [Disable] when shooting moving subjects under low light, or
when afterimages such as trails may occur.
252
z Miniature Model Effect in Movies (Miniature
Effect Movie)
z You can also move the AF point with the dial.
z Sound is not recorded.
z To make people and objects in the scene move quickly during playback,
choose [
], [ ], or [ ] before recording the movie. The scene will
resemble a miniature model.
z Estimated playback speed and time for a movie recorded for one
minute are as follows.
Speed Playback Time
Approx. 12 sec.
Approx. 6 sec.
Approx. 3 sec.
z Recording Video Snapshots
z Video snapshots are saved to a new album when the recording time of
the current album exceeds 5 min.
z The indicated playback time per video snapshot is only a guideline.
z Set the movie recording size to [
] or [ ].
z Any video snapshots that you manually stop recording are saved as
normal movies.
z No sound is recorded when you set [Playback effect] to [2x speed] or
[1/2x speed].
253
z Recording Time-Lapse Movies
z As you congure the items, the time required [ ] and movie playback
time [
] are displayed.
z Set [Screen auto off] to [Disable] to keep the screen on for 30 minutes
after you start shooting. Set it to [Enable] to turn the screen off about
10 seconds after the rst frame is captured.
z Do not disturb the camera while recording.
z To cancel recording, press the movie recording button again.
z Fast-moving subjects may look distorted in movies.
z Sound is not recorded.
254
Playback
Learn about viewing your stills and movies on the camera.
z Viewing
z Pressing the button when the camera is off starts playback, and
pressing it again turns the camera off.
z The lens is retracted after about a minute during playback. You can turn
the camera off when the lens is retracted by pressing the
button.
z To switch to a shooting mode during playback, press the shutter button
halfway, press the movie recording button, or turn the mode dial.
z It may not be possible to play back or edit images that were renamed or
already edited on a computer.
z To pause or resume movies, press the
button.
z Lines indicating the aspect ratio are displayed when you view RAW
images. These lines are shown on the top and bottom of images shot at
an aspect ratio of [
] [ ] and on the left and right of images shot at
an aspect ratio of [
].
z Magnifying Images
z When viewing a magnied image, you can switch to other images while
maintaining magnied display by turning the
dial.
z Viewing Digest Movies
z After a moment, [ ] will no longer be displayed when you are
using the camera with information display deactivated.
255
z Editing Movies
Removing the Beginning/End of Movies
z When you are specifying portions to cut, moving [ ] to a position not
identied with a [
] icon will cut from the beginning to the nearest [ ]
mark on the left (for [
]) or from the nearest [ ] mark on the right to
the end (for [
]).
z To erase and overwrite the original movie with the edited one, choose
[Overwrite] on the screen for saving edited movies.
z If the memory card lacks sufcient space, only [Overwrite] will be
available.
z Movies may not be saved if the battery pack runs out while saving is in
progress.
z When editing movies, you should use a fully charged battery pack.
z Image quality after compression when you choose [Save compressed
version] is as follows.
Before Compression After Compression
, ,
, ,
Editing Digest Movies
z After [Erase this clip?] is displayed, the chapter is erased and the digest
movie is overwritten when you choose [OK] and press the
button.
z Albums created when recording video snapshots can also be edited.
Albums created with
[Create album] cannot be edited.
256
z Protecting Images
z Protected images on a memory card will be erased if you format the
card.
z Protected images cannot be erased using the camera’s erasure
function. To erase them this way, rst cancel protection.
z You can choose [All found images] or [Unprotect all found] by using
[Protect images] or button → [ ] → button when results
are displayed for your specied image search conditions.
- Choose [All found images] to protect all found images.
- Choose [Unprotect all found] to clear protection of all found images.
z To cancel protection and remove [
] display, press the button again
when [
] is displayed on the screen after you have chosen [Protect
images] → [Select images].
z Erasing Images
z Protected images cannot be erased.
z During display of images captured in both RAW and JPEG format,
pressing the
button displays [Erase ], [Erase JPEG], and [Erase
]. Choose an option to erase the image.
z You can choose [All found images] by using
[Erase images] when
results are displayed for your specied image search conditions.
- Choose [All found images] to erase all found images.
z To clear selection and remove [
] display, press the button again
when [
] is displayed on the screen after you have chosen [Erase
images] → [Select images].
Erasing Multiple Images at Once
z Choosing an image captured in both RAW and JPEG format will erase
both versions.
257
z Adding Images to Print Orders (DPOF)
z RAW images and movies cannot be selected.
z Not all of your DPOF settings may be applied in printing by the printer
or photo development service, in some cases.
z Setting [Date] to [On] may cause some printers to print the date twice.
z Adding Images to a Photobook
z RAW images and movies cannot be selected.
z Correcting Red-Eye
z Once red-eye is corrected, frames are displayed around corrected
image areas.
z Some images may not be corrected accurately.
z Cropping
z RAW images cannot be edited.
z Cropped images cannot be cropped again.
z Cropped images cannot be resized.
z Cropped images will have a lower pixel count than uncropped images.
z While previewing the cropped image, you can adjust the cropping frame
size, position, and aspect ratio.
z You can also specify the cropping frame size, position, orientation,
and aspect ratio by choosing
[Cropping], choosing an image, and
pressing the
button.
z Resizing Images
z RAW images cannot be edited.
258
z Rating Images
z By viewing only images with a specied rating, you can restrict the
following operations to all images with that rating.
- Viewing, protecting, erasing, or adding images to a print list or
photobook, viewing slideshows
z To remove ratings, press the
button, choose [ ] in the [ ] setting
item, and then press the
button.
z When rating images using
[Rating], you can apply a rating to all
images in a folder.
z Viewing Slideshows
z After you start playback and [Loading image] is displayed, the
slideshow starts in a few seconds.
z Press the
button to stop the slideshow.
z The camera’s power-saving functions are deactivated during slideshows.
z To pause or resume slideshows, press the
button.
z You can switch to other images during playback by pressing the
/
buttons. For fast-forward or fast-rewind, hold the
/ buttons down.
z On the slideshow start screen, you can choose [Set up] to congure
slideshow repetition, display time per image, and the transition between
images.
z Finding Images Matching Specified Conditions
z You can apply protection or ratings exclusively to the found images in
yellow frames by pressing the
button.
z If you edit images and save them as new images, a message is
displayed, and the images that were found are no longer shown.
z Combining Video Snapshots
z Albums created with [Create album] cannot be edited.
259
Wireless Features
Learn about wireless camera features.
z Saving Camera Images to a Smartphone
z Any active Bluetooth connections will be lost if you remove the camera
battery pack. The connection will be reestablished when you insert the
battery pack and turn on the camera.
z Battery life may be shorter when you use the camera after pairing with
a smartphone, because power is consumed even when the camera is
off.
z Before bringing the camera to places where the use of electronic
devices is restricted, disable active Bluetooth communication (which
is used even when the camera is off) by choosing
[Wireless
communication settings] → [Bluetooth function] (twice) → [Disable].
z To turn off Wi-Fi signal transmission, choose
[Wireless
communication settings] → [Wi-Fi settings] → [Wi-Fi] → [Disable].
z You can change the camera nickname in
[Wireless communication
settings] → [Nickname].
z You can send images to a smartphone connected via Wi-Fi or paired
via Bluetooth (Android devices only) by choosing the images from the
camera’s playback screen. Press the
button and choose [ ].
Restricting Image Viewing
z Remote live view shooting in Camera Connect is not possible unless
[Viewable imgs] is set to [All images].
260
z Features Used with Smartphones
Shooting Remotely as You View a Live Image on the
Smartphone
z If the camera temporarily overheats during extended 4K recording or
full HD recording at a high frame rate, [
] is displayed and recording
stops. At this time, movie recording will be unavailable, even if you
press the movie recording button. Following the instructions displayed,
either choose a movie recording size other than [
], [ ],
[
], or [ ] or turn off the camera to let it cool down before
you resume recording.
Geotagging Images as You Shoot
z The location information added to movies is acquired initially, when you
start recording.
z Shots may not be geotagged immediately after the camera is turned on.
z Others may be able to locate or identify you by using location data in
your geotagged still images or movies. Be careful when sharing these
images with others, as when posting images online where many others
can view them.
z By accessing playback screens with detailed information, you can
check location information added to your shots. Latitude, longitude,
elevation, and UTC (shooting date and time) are listed from top to
bottom.
z UTC: Coordinated Universal Time, essentially the same as Greenwich
Mean Time
z [---] is shown instead of numerical values for items not available on your
smartphone or items not recorded correctly.
261
z Connecting to Printers via Wi-Fi
Establishing a Connection via an Access Point
z The PIN code displayed when you choose [WPS (PIN mode)] in
[Connect with WPS] is entered on the access point. Choose a device
on the [Select a device for connection] screen. For further details, refer
to the user manual included with your access point.
z Sending Images to a Computer Automatically
Sending Images Automatically
z When using auto image transfer, ensure that the battery pack has
sufcient charge. Power saving on the camera is deactivated.
z Any images captured after auto image transfer are not sent to the
computer then. They are sent automatically when the camera is
restarted.
z If auto image transfer to a computer does not begin automatically, try
restarting the camera.
z To stop sending images automatically, choose [Auto send images to
computer] → [Auto send] → [Disable].
z Uploading Images to Web Services
Registering CANON iMAGE GATEWAY
z Make sure initially that your computer or smartphone mail application
is not congured to block email from relevant domains, which may
prevent you from receiving the notication message.
Registering Other Web Services
z If any congured settings change, update camera settings by
registering affected Web services on the camera.
262
Uploading Images to Web Services
z To view images uploaded to CANON iMAGE GATEWAY on a
smartphone, try the dedicated Canon Online Photo Album app.
Download and install the Canon Online Photo Album app for iPhones or
iPads from the App Store or for Android devices from Google Play.
263
Function Settings
Learn about setting up basic camera functions.
z Selecting and Creating Folders
z Folders are named as in 100CANON, with a three-digit folder number
followed by ve letters or numbers.
z Folders with numbers in the range 100–999 can be created.
z Changing File Numbering
z Regardless of the option selected in this setting, shots may be
numbered consecutively after the last number of existing images on
newly inserted memory cards. To start saving shots from 0001, use an
empty (or formatted) memory card.
z Formatting Memory Cards
z Formatting or erasing data on a memory card only changes le
management information on the card and does not erase the data
completely. When disposing of or transferring ownership of memory
cards, take steps to protect personal information if necessary, as by
physically destroying cards.
z The total card capacity indicated on the formatting screen may be less
than the advertised capacity.
z Low-level formatting takes longer than initial formatting, because data is
erased from all storage regions of the memory card.
z You can cancel low-level formatting in progress by choosing [Cancel].
In this case, all data will be erased, but the memory card can be used
normally.
264
z Adjusting Power-Saving Features
z To conserve battery power, you should normally choose [Power
saving] → [Display off] and [Auto power off] → [1 min.] or less.
z The [Display off] setting is applied even if you set [Auto power off] to
[Disable].
z [Display off] and [Auto power off] are not available when Eco mode is
set to [On].
z Adjusting Screen Brightness
z For maximum brightness (regardless of the [Disp. Brightness]
setting), press and hold the
button for at least one second from
the shooting screen or during single-image display. To restore the
original brightness, press and hold the
button again for at least
one second or restart the camera.
z Customizing Shooting Information Display
z To make the grid pattern smaller, choose [Shooting info. disp.] →
[Grid display].
z To switch from a brightness histogram to an RGB histogram or adjust
the display size, choose
[Shooting info. disp.] → [Histogram disp].
z The electronic level is not displayed when
[AF method] is set to
[
].
z Configuring Custom Functions
z To restore [Custom Functions (C.Fn)] defaults (except [Custom
Controls] settings), choose
[Reset camera] → [Other settings] →
[Custom function (C.Fn)] → [OK].
265
Customizing Buttons
z To restore [Custom Controls] defaults, choose [Reset camera] →
[Other settings] → [Custom Controls] → [OK].
z Custom Shooting Modes (C1/C2)
z To edit saved settings (other than shooting mode), choose or ,
change the settings, and then choose
[Custom shooting mode (C1,
C2)] → [Register settings] again. These setting details are not applied
in other shooting modes.
z To reset saved settings to their defaults, choose
[Custom shooting
mode (C1, C2)] → [Clear settings], and then choose the custom
shooting mode.
z To automatically update your saved settings with any changes to
settings that you make while shooting in
/ mode, set [Custom
shooting mode (C1, C2)] → [Auto update set.] → [Enable].
z Restoring Default Camera Settings
z Basic settings such as [Language ] and [Date/Time/Zone] are not
restored to defaults.
z Setting Copyright Information to Record in
Images
z To check the information entered, choose [Copyright information] →
[Display copyright info.].
z You can delete both the registered author’s name and copyright details
at the same time by choosing
[Copyright information] → [Delete
copyright information], but copyright information already recorded in
images is not deleted.
266
z Saving Commonly Used Shooting Menu Items
(My Menu)
z You can add up to [ 5] My Menu tabs.
z Grayed-out items can also be specied for your added My Menu tabs,
but they may not be available in some shooting modes.
z Choosing [Congure] → [Delete all items on tab] → [OK] on your added
My Menu tab will delete all items added to the tab.
267
Accessories
Learn about accessories.
z Optional Accessories
Power Supplies
z The battery charger can be used in areas with 100 – 240 V AC power
(50/60 Hz).
z For power outlets in a different format, use a commercially available
adapter for the plug. Never use an electrical transformer designed for
traveling, which may damage the battery pack.
Others
z A lens lter and lens cap cannot be attached to the camera at the same
time.
z Using Optional Accessories
Playback on a TV
z Some information may not be displayed when viewing images on a TV.
z During HDMI output, display of the next image may take some time if
you switch between 4K and HD movies, or movies of different frame
rates.
Using a Lens Hood (Sold Separately)
z Vignetting may occur if you use the ash when the lens hood is
attached.
z A lens hood and lter adapter cannot be attached to the camera at the
same time.
268
Using Lens Filters (Sold Separately)
z We recommend the use of genuine Canon lters (67 mm dia.).
z When not using auto focus to shoot, set the manual focus option
[Safety MF] to [On].
z If you use the ash with the lter adapter attached, portions of the
image may appear darker.
z When using the lter adapter, be sure to use only one lter at a time.
Attaching multiple lters may cause them to fall off, and it may damage
the camera or lter adapter.
z Do not grip the lter adapter tightly.
z Remove the lter adapter when not using a lter.
z A lens hood and lter adapter cannot be attached to the camera at the
same time.
Shooting Remotely
z Auto power off is triggered in about two minutes, even if you have set it
for one minute.
z To clear pairing information, choose
[Wireless communication
settings] → [Bluetooth function] → [Check/clear connection info] and
then press the
button.
Using an External Microphone
z Any attenuator settings you have congured are also applied to
recording with the external microphone.
z Connecting an external microphone will deactivate [Wind lter].
269
Troubleshooting
If you think there is a problem with the camera, rst check the following. If
the issue persists, contact a Customer Support Help Desk.
Power
Nothing happens when the power button is pressed.
z Dirty battery terminals reduce battery performance. Try cleaning the
terminals with a cotton swab and reinserting the battery pack a few
times.
The battery pack runs out of power quickly.
z Battery performance decreases at low temperatures. Try warming the
battery pack a little by putting it in your pocket, for example, ensuring
that the terminals do not touch any metal objects.
z Dirty battery terminals reduce battery performance. Try cleaning the
terminals with a cotton swab and reinserting the battery pack a few
times.
z If these measures do not help and the battery pack still runs out of
power soon after charging, it has reached the end of its useful life.
Purchase a new battery pack.
The battery pack is swollen.
z Battery swelling is normal and does not pose any safety concerns.
However, if battery swelling prevents the battery pack from tting in the
camera, contact a Customer Support Help Desk.
Shooting
Cannot shoot.
z During playback, press the shutter button halfway.
270
Strange display on the screen when shooting.
z Note that the following display problems are not recorded in still images
but are recorded in movies.
- The screen may icker and horizontal banding may appear under
uorescent or LED lighting.
Movie recording or playback suddenly stops.
z For [
] or [ ], use a UHS-I memory card with a UHS
speed class of 3.
[
] is displayed and the camera turns off automatically.
z After extended shooting, or shooting in hot weather, [
] is displayed
to indicate that the camera will soon turn off automatically. In this case,
turn off the camera and allow it to cool down.
Continuous shooting is much slower.
z Under high temperatures, continuous shooting may be much slower. In
this case, turn off the camera and allow it to cool down.
Shots are out of focus.
z Conrm that unneeded functions such as macro are deactivated.
z Try shooting with AF lock.
No AF points are displayed and the camera does not focus when the shutter
button is pressed halfway.
z To have AF points displayed and the camera focus correctly, try
composing the shot with higher-contrast subject areas centered before
pressing the shutter button halfway (or pressing it halfway repeatedly).
Subjects in shots look too dark.
z Adjust brightness by using exposure compensation.
z Use AE lock or spot metering.
271
Subjects look too bright, highlights are washed-out.
z Adjust brightness by using exposure compensation.
z Use AE lock or spot metering.
z Reduce the lighting on subjects.
Shots look too dark despite the ash ring.
z Adjust brightness by using ash exposure compensation or changing
the ash output level.
z Increase the ISO speed.
Subjects in ash shots look too bright, highlights are washed-out.
z Adjust brightness by using ash exposure compensation or changing
the ash output level.
Recording Movies
Subjects look distorted.
z Subjects that pass in front of the camera quickly may look distorted.
Wi-Fi
Cannot access the Wi-Fi menu by pressing the
button.
z The Wi-Fi menu cannot be accessed while the camera is connected to
a printer or computer via a cable. Disconnect the cable.
Cannot connect to the access point.
z Conrm that the access point channel is set to a channel supported
by the camera. Note that instead of auto channel assignment, it is
advisable to specify a supported channel manually. For details on
supported channels, check the Canon website.
272
Images take a long time to send. / The wireless connection is disrupted.
z Do not use the camera near sources of Wi-Fi signal interference such
as microwave ovens or other equipment operating on the 2.4 GHz
band.
z Bring the camera closer to the other device you are trying to connect
to (such as the access point), and make sure there are no objects
between the devices.
Cannot pair with a smartphone via Bluetooth.
z Pairing with a smartphone via Bluetooth is not possible if you are using
Wireless Remote Control BR-E1 after choosing [Bluetooth function] →
[Bluetooth function] → [Remote].
Error Codes
Error codes (Errxx) and recommended responses are displayed.
z Error codes are displayed if camera problems occur. If the problem
persists, write down the error code (Errxx) and contact a Customer
Support Help Desk.
z Error numbers for wireless communication errors (Errxx) are displayed
in the upper right of the screen accessed by choosing
[Wireless
communication settings] → [Wi-Fi function]. Press the
button to
view error details on information display screens.
273
On-Screen Information
z When Shooting
(
51
)
(
56
)(
55
)(
54
)(
53
)(
52
)
(
50
)(
49
)(
48
)(
47
)
(
45
)
(
44
)
(
43
)
(
58
)
(
37
) (
38
)
(
39
)
(
35
)(
34
)(
33
)
(
25
)
(
26
)
(
27
)
(
36
)
(
28
)
(
29
)
(
31
)
(
30
)
(
1
)
(
2
)
(
3
)
(
4
)
(
5
)
(
6
)
(
8
)
(
7
)
(
9
)
(
10
)
(
11
)
(
12
)
(
15
)(
14
)
(
41
)
(
57
)
(
16
) (
18
) (
21
)
(
24
)
(
23
)
(
22
)
(
17
)
(
40
)
(
46
)
(
42
)
(
20
)(
13
) (
19
)
(
32
)
(1) Shooting mode, Scene icon
(2) AF method
(3) AF operation
(4) Grid lines
(5) Drive mode/Self-timer
(6) Metering mode
(7) Image quality
(8) Miniature effect movie
(9) Movie recording size
(10) Video snapshot
(11) Camera shake warning
(12) AE lock
(13) Recordable shots
(14) Maximum continuous shots
(15) Movie recording time available
(16) Battery level
274
(17) Zoom magnification,
Digital tele-converter
(18) AF point
(19) Spot AE point frame
(20) Electronic level
(21) Framing Assist – Lock
(22) Histogram
(23) Focus range
(24) White balance
(25) Style settings
(26) Auto Lighting Optimizer
(27) Still image aspect ratio
(28) Exposure simulation
(29) Date stamp
(30) Bluetooth connection status
(31) ISO speed
(32) Flash mode
(33) Shutter speed
(34) Flash exposure compensation /
Flash output level
(35) Aperture value
(36) AEB
(37) Exposure level indicator
(38) Bluetooth smartphone connection,
GPS acquisition status
(39) Wi-Fi signal strength
(40)
Auto
(41) Hybrid Auto mode / Digest type
(42) Zoom bar
(43)
Time required
(44)
Interval
(45) White balance correction
(46) MF indicator
(47) Movie Servo AF
(48) Display performance
(49) Eco mode
(50) Image stabilization
(51) Exposure compensation
(52) Audio recording mode
(53) Wind filter
(54) Attenuator
(55)
Auto slow shutter
(56) Auto level
(57) Intelligent IS
(58)
Number of shots
275
z During Playback
(
1
)
(
8
) (
9
) (
10
) (
11
) (
12
)
(
2
) (
3
) (
6
)
(
4
) (
5
) (
7
)
(1) Current image / Total images
(2) Battery level
(3) Wi-Fi signal strength
(4) Bluetooth connection status
(5) Rating
(6) Protection
(7) Folder number - File number
(8) Shutter speed
(9) Aperture value
(10) Exposure compensation level
(11) ISO speed
(12) Image quality*
* Images captured with resizing, cropping, or red-eye correction applied are labeled
with [
]. Cropped images are labeled with [ ].
276
(
1
) (
2
) (
3
) (
4
) (
5
) (
6
) (
7
)
(
8
) (
9
) (
10
) (
11
) (
12
) (
13
)
(
14
) (
15
) (
16
) (
17
) (
18
)
(1) Shooting date/time
(2) Histogram
(3) Shooting mode
(4) Shutter speed
(5) Aperture value
(6) Exposure compensation level
(7) ISO speed
(8) White balance
(9) White balance correction
(10) Style setting details
(11) Auto level
(12) Flash exposure compensation
(13) Metering mode
(14) Auto Lighting Optimizer
(15) Movie recording size
(16) Image quality*
(17) Movie recording time
(18) File size
* Images captured with resizing, cropping, or red-eye correction applied are labeled
with [
]. Cropped images are labeled with [ ].
277
Precautions for Wireless Features
z Before goods or technologies in the camera regulated by the Foreign
Exchange and Foreign Trade Act are exported (which includes bringing
them outside Japan or showing them to non-residents in Japan), export
or service transaction permission may be required from the Japanese
government.
z Because this product includes American encryption items, it falls under
U.S. Export Administration Regulations, and cannot be exported to or
brought into a country under U.S. trade embargo.
z Be sure to make notes of the Wi-Fi settings you use. The wireless
settings saved to this product may change or be erased due to incorrect
operation of the product, the effects of radio waves or static electricity,
or accident or malfunction. Please note that Canon accepts no
responsibility for direct or indirect damages or loss of earnings resulting
from a degradation or disappearance of content.
z When transferring ownership, disposing of the product, or sending it for
repair, restore the default wireless settings by erasing any settings you
have entered.
z Canon will not make compensation for damages resulting from loss or
theft of the product.
Canon accepts no responsibility for damages or loss resulting from
unauthorized access or use of target devices registered on this product
due to loss or theft of the product.
z Be sure to use the product as directed in this guide.
Be sure to use the wireless function of this product within the guidelines
noted in this guide. Canon accepts no responsibility for damages
or loss if the function and product are used in ways other than as
described in this guide.
278
z Security Precautions
Because Wi-Fi uses radio waves to transmit signals, security precautions
more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
z Only use networks you are authorized to use.
This product searches for Wi-Fi networks in the vicinity and displays
the results on the screen. Networks you are not authorized to use
(unknown networks) may also be displayed. However, attempting to
connect to or using such networks could be regarded as unauthorized
access. Be sure to use only networks you are authorized to use, and do
not attempt to connect to other unknown networks.
If security settings have not been properly set, the following problems may
occur.
z Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions and
attempt to acquire the data you are sending.
z Unauthorized network access
Third parties with malicious intent may gain unauthorized access to
the network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access
such as impersonation (where someone assumes an identity to gain
access to unauthorized information) or springboard attacks (where
someone gains unauthorized access to your network as a springboard
to cover their tracks when inltrating other systems).
To prevent these types of problems from occurring, be sure to thoroughly
secure your Wi-Fi network.
Only use this camera’s Wi-Fi function with a proper understanding of
Wi-Fi security, and balance risk and convenience when adjusting security
settings.
279
Third-Party Software
z AES-128 Library
Copyright (c) 1998-2008, Brian Gladman, Worcester, UK. All rights
reserved.
LICENSE TERMS
The redistribution and use of this software (with or without changes) is
allowed without the payment of fees or royalties provided that:
1. source code distributions include the above copyright notice, this list
of conditions and the following disclaimer;
2. binary distributions include the above copyright notice, this list of
conditions and the following disclaimer in their documentation;
3. the name of the copyright holder is not used to endorse products
built using this software without specic written permission.
DISCLAIMER
This software is provided 'as is' with no explicit or implied warranties in
respect of its properties, including, but not limited to, correctness and/or
tness for purpose.
280
z CMSIS Core header les
Copyright (C) 2009-2015 ARM Limited.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modication, are permitted provided that the following conditions are
met:
- Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be
used to endorse or promote products derived from this software
without specic prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS
AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
COPYRIGHT HOLDERS AND CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
281
z KSDK Peripheral Drivers, Flash / NVM, KSDK H/W Abstraction Layer
(HAL)
(c) Copyright 2010-2015 Freescale Semiconductor, Inc.
ALL RIGHTS RESERVED.
Redistribution and use in source and binary forms, with or without
modication, are permitted provided that the following conditions are
met:
* Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of the <organization> nor the names of its
contributors may be used to endorse or promote products derived
from this software without specic prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS
AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
<COPYRIGHT HOLDER> BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
282
Personal Information and Security
Precautions
If personal information and/or Wi-Fi security settings, such as passwords,
etc., are saved on the camera, please be aware that such information and
settings may still remain in the camera.
When transferring the camera to another person, disposing of it, or sending
it for repair, be sure to take the following measures to prevent the leakage
of such information and settings.
z Erase registered Wi-Fi security information by choosing [Clear settings]
in the Wi-Fi settings.
283
Trademarks and Licensing
z Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
z Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
z App Store, iPhone, and iPad are trademarks of Apple Inc.
z The SDXC logo is a trademark of SD-3C, LLC.
z HDMI, the HDMI logo and High-Denition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
z Wi-Fi
®
, Wi-Fi Alliance
®
, WPA™, WPA2™ and Wi-Fi Protected Setup™
are trademarks or registered trademarks of the Wi-Fi Alliance.
z The Bluetooth
®
word mark and logos are registered trademarks owned
by Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is
under license. Other trademarks and trade names are those of their
respective owners.
z All other trademarks are the property of their respective owners.
z This device incorporates exFAT technology licensed from Microsoft.
z This product is licensed under AT&T patents for the MPEG-4 standard
and may be used for encoding MPEG-4 compliant video and/or
decoding MPEG-4 compliant video that was encoded only (1) for
a personal and non-commercial purpose or (2) by a video provider
licensed under the AT&T patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.
284
Disclaimer
z Unauthorized reproduction of this guide is prohibited.
z All measurements based on Canon testing standards.
z Information subject to change without notice, as are product
specications and appearance.
z Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
z The above items notwithstanding, Canon cannot be held liable for any
loss arising from the use of this product.
285
Numbers
1-point AF 107
Roman
A
Accessories 219, 268
AEB shooting 96, 248
AE lock 72, 242
AF-assist beam 111
AF lock 82
AF method 107, 250
AF points 107, 250
AF-point zoom 80, 245
Art bold effect (shooting mode) 62
Aspect ratio 84
Attenuator 118
Auto level 113
Auto Lighting Optimizer 99, 249
Auto mode (shooting mode) 52, 234
Av (shooting mode) 69, 241
B
Battery charger 219, 268
Battery pack
Charging 23, 230
Eco mode 189
Power saving 190, 265
Beep 195
Bluetooth 156, 181, 260
C
C1/C2 (shooting mode) 209, 266
Camera
Resetting 210, 266
Camera Connect 156, 260
CANON iMAGE GATEWAY 174, 262
Changing or deleting connection
information 182
Charging 23, 230
Color temperature 249
Color (white balance) 103, 249
Compression 83, 245
Continuous shooting 92, 247
Creative lters (shooting mode) 61
Cropping 145, 258
Custom Functions 207, 265
Custom white balance 104, 249
D
Date/time/zone
Changing 192
Settings 27, 231
Digital tele-converter 114, 251
Digital zoom 71, 242
Display language
Changing 193
Settings 27, 231
DPOF 141, 258
E
Eco mode 189
Editing
Cropping 145, 258
Red-eye correction 144, 258
Resizing images 147, 258
Erasing 139, 257
Error messages 270
Exposure
AE lock 72, 242
Index
286
Compensation 95, 248
FE lock 87, 246
External microphone 225, 269
F
Face+Tracking 107, 250
FE lock 87, 246
File numbering 185, 264
Fireworks (shooting mode) 59, 239
Fish-eye effect (shooting mode) 62
Flash
Flash exposure compensation 88
Flash off 86
Flash timing 90, 247
Mode 86, 246
Slow synchro 86
Flash exposure compensation 88
Flash off 86
Focusing
AF lock 82
AF points 107, 250
MF peaking 81, 245
Servo AF 106, 250
Focus range
Macro 79, 245
Manual focus 80, 245
Food (shooting mode) 58, 238
Framing assist
Lock 77, 244
Seek 73, 243
G
Geotagging images 166, 261
Grainy B/W (shooting mode) 62
Grid lines 200, 265
H
Handheld night scene (shooting
mode) 59, 239
HDMI cable 221, 268
Hybrid Auto (shooting mode) 54, 236
I
Icons 274, 276
Image quality 83, 245
Images
Display period 85
Erasing 139, 257
Protecting 136, 257
Image stabilization 112, 251
Index display 131
Indicator 37
ISO speed 98, 248
J
Jump display 151
L
Lamp 111
M
Macro (focus range) 79, 245
Magnied display 129, 255
Manual focus (focus range) 80, 245
Memory cards 24, 231
Menu
Basic operations 40
Table 43
Metering method 100
MF (Manual focusing) 80, 245
MF peaking 81, 245
Miniature effect movie 121, 253
Miniature effect (shooting mode) 63,
64
287
Movie manual exposure (shooting
mode) 65, 240
Movies
Create album 152, 259
Editing 132, 256
Recording size 116, 252
Movie Servo AF 119, 252
M (shooting mode) 70, 241
My Menu 214, 267
P
Panoramas (shooting mode) 55, 237
Photobook set-up 143, 258
PictBridge 167, 220, 227
Pixel count (image size) 83, 245
Portrait (shooting mode) 58
Power 219, 268
Power saving 190, 265
Printing 141, 167, 227, 258, 262
Program AE 67, 240
Protect images 136, 257
Protecting 136, 257
P (shooting mode) 67, 240
Q
Quick Control screen 42
Basic operations 39, 232
R
Rating 148, 259
RAW 83, 245
Red-eye correction 144, 258
Resetting 210, 266
Resizing images 147, 258
Rotating 138
S
Saving images to a computer 226
Screen
Display language 27, 193, 231
Icons 274, 276
Searching 150, 259
Self portrait (shooting mode) 58, 60,
238
Self-timer 93, 247
Sending images 174, 262
Sending images to a smartphone
158, 165, 260, 261
Sending images to Web services
174, 262
Servo AF 106, 250
Shooting
Shooting information 274
Slideshow 149, 259
Smooth skin (shooting mode) 58, 238
Soft focus (shooting mode) 62
Software
Sending images to a computer
automatically 171, 262
Sports (shooting mode) 56, 238
Spot AF 107
Strap 22
Style settings 105
T
Terminal 221, 226, 227
Time-lapse movie (shooting mode)
124, 254
Toy camera effect (shooting mode)
63
Tracking AF 107, 251
Troubleshooting 270
TV display 221, 268
Tv (shooting mode) 68, 241
288
V
Video snapshot 122, 253
Video system 194
Viewing 32, 128, 255
Digest movies 130, 255
Image search 150, 259
Index display 131
Jump display 151
Magnied display 129, 255
Single-image display 128
Slideshow 149, 259
TV display 221, 268
W
Water painting effect (shooting mode)
63
White balance (color) 103, 249
Wi-Fi features 155, 260
Wind lter 118
Wireless features 155, 260, 278
Z
Zoom 30, 52, 71, 242
289
