Instruction Manual - Page 2

For RV-NB50. Also, The document are for others JVC models: RV-NB52B

Loading ...
on the other side of this sheet>
o Note that any data cannot be sent to JPod from
the unit.
o JVC is not responsible for any loss ofordamage
to iPod that might result from the use of this
product.
When you connect iPod to the unit, make sure
the connection on this unit is fully inserted intc
iPod.
Do not carry the unit with iPod connected. You
might drop it down or il might cause damages to
the connector part.
o Do not touch or hit the [Pod terminal pins orthe
o While playing back a track from iPod, do not
disconnect the iPod. Doing so may cause
malfunction of both this unit and iPod.
o Always set the volume to the minimum level
when connecting or disconnecting iPod.
Connect iPod
Open the front door
@ter
(suppN
iPod or sold
separately)
Front door
To detach the dock adapter
Pull up the dock adapter
with your fingernail or
T sharp pointed tool using
"_ the slot.
2. PressiPodl_/ilo
iPod is turned on and starts playing.
, When you setected another source press
iPod I_/11ag ain to start playback.
Main unit Remote control
_ ,Pod @
Adjust the voiume.
When iPod is selected as the source...
- "CONNECT" appears on the disptay of the unit
when iPod connected.
- "NOiPod" appears on the disptay of the unit
when iPod is not connected.
iPod menu operation
To pause, press iPod I_/1111.
. To cancel pause, press iPod _/111again.
Playback continues from the point where it
was paused.
To select a track, press 1_141or I_t_l.
Main unit Remote control
Press I_1_1once to skip to the beginning of
the next track.
1 Press MENU to displaythe menu°
FM MODE
2 Press GROUP UP or GROUP DOWN to
select a menu item, then press SET te
confirm it.
To go back to the previous menu, press MENU.
Refer also to the instruction manual for iPod for
details.
Io Press(b!L
The unit turns on.
Main unit
o Press I_l_l to skip to the beginning of the Tumin o iPod
o Be careful not to injure your fingertips oi track being played. Press and hotd iPod I_/il for about 2 seconds.
damage the terminal of the dock. Press i_t_1 twice quickly to skip to the o Seiectina another source also turns off iPod.
beginning of the previous track, o Turning off the unit may not turn off iPod
depending on the current source.
To fast forward/reverse, press and hold
I_-_ or _l during playback. About the battery charge Qfi
, When the unit is connected to the AC outlet
or car battery:
Remote control The iPod battery is always charged.
STANDBY/ON
"at _A/henthe unit is operated on batteries:
The iPod battery is not charged even if
the unit is turned on.
To displaythe clock,press DISPLAY.
Load a disc ot connect a USB device.
Disc
USB device
\ &_ -,
USB
USBcord memory
%
I. Press elL
The unit turns on.
Main unit Remote control
STANDBY/ON
Oil
2. Press CD l_tli or USB I_/illo
Starts reading the disc or USB device and
playback.
Main unit Remote control
3. Adjust the volume°
Display during playback
Current track
number I,
IF71
ILl
To stop playback. Press m
Main unit
[]
7- Playback
i; / time
1"711"71,LJI-I
IZJIi_J' I
Rein ore control
To locate a track directly, press number
buttons.
To directly play track 5, press 5,
To directly play track 1S, press +10
then 5.
o To directly play track 20, press +10
once, then press 10.
To directly play track press €10,
+10 then press 5.
o To directly phy track 40, press +10,
+1 O,44 0 then press 1O.
o To directly play track 109, press ¢100
once, then press 9.
To pause, press CD I_/11or USB t_/1111, o To directly play track 120, press +100,
To cancel pause, press _/!i again. Playback +10 then 10.
continues from the point where it was paused. To directly play track 125, press +100,
+10,+10 then 5.
To select a track, press I_b_ or _l.
Main unit Remote control
To fast forward/reverse, press and hold
141_1or t_1_1during playback.
Press _1 once to skip to the beginning of the
next track.
o Press b,_ql to skip to the beginning of the track
being played.
Press t_l_l twice quickly to skip to the
beginning of the previous track.
To select a group (for MP3A_VMA), press
GROUP UP or GROUP DOWN. (Remote
control onJy_
GROUP U_
GROUP DOWN
Press GROUP UP to skip to the next
group.
Press GROUP DOWN to skip to the
previous group.
When the power is supplied through the AC outlet
or car adapter for the first time after the purchase.
the CLOCK indicator and"AM 12:00"flash on the
display. Set the clock before using the sleep and
daily timers.
1, Press CLOCK/TIMER,
CLOC_T MER
2. Press I_-_/_ or _/_1 to adjust the hour.
!.....i ......,
3,
, When you press and hold the button, the
hour digit changes continuously.
Press SET,
SET
4,
5,
The minutes digits start flashing on the display.
Press I-_-_l_P_ or _1_1 to adjust the
minute.
, When you press and hold the button, the
minute digit changes continuously.
, If you want to change the hour setting, press
CANCEL.
PressSET,
Finish setting the clock.
o Each t_me you press the button the clock and
normal indicator changes alternately.
About one hour after you disconnect the AC
power cord or car adapter the set time will be
reset.
If the power supplied using batteries, the clock
does not appear on the display when the unit is
turned off.
1. Press SLEEk
SLEEP
Q
Each time you press the button, the shut-off time
(in minute) changes as follows:
10_ 20_ 30_60_90_ 120_ OFF_
( back to the beginning)
The unit is now set to turn off after the minutes you
set have elapsed.
To check the remaining time until the unit shuts
off, press SLEEP once.
To cancel the sleep timer, press SLEEP repeatedly to
select "OFF:'
Using the Daily Timer, you can wake up with
your favorite music.
Tune into a station, load a disc or connect a
USB device JPod to the unit and make sure
that the source works properly beforehand.
1, Press CLOCK/TIMER,
CLOCKJ MER
2. Press _t _ or _1_1 to adjust the
hour.
, When you press and hold the button,
the hour digit changes continuously.
3, Press SET,
SET
The minutes digits start flashing on the
display.
4, Press I_l-_P_ or _1_1 to adjust the
minute,
, When you press and hold the button,
the minute digit changes continuously.
o If you want to change the hour setting,
press CANCEL.
5, Press SET,
Finish setting on-time.
6, Press I_l_l or _1_1 to select the source,
7, Press I-_-_/-_P_ or _1_1 to adjust the
volume.
See the instruction about adjusting volume.
8, Press SET.
J_ ON lights.
9, Press (biI to turn off the unit.
, The daily timer works only when the unit is on
standby.
, When the on-time comes, the unit sets the
volume graduaNy to the preset levek
To correct a misentry during the process, press
CANCEL.
You can return to the previous step.
To change the set timer info when _ ONiS lit,
press CLOCK/TIMER twice.
You can start setting from step 2.
To turn off the daily timer, press CANCEL.
, While the timer is being set, the timer indicator
(J#,.))lights up.
, While the timer is working, the timer indicator
(ON)flashes.
o if you don't operate the unit for more than 1 hour,
Adjusting the volume
You can adjust the volume level
between MIN 01 and 30 MAX.
Main unit Remote control
13
VOLUME
lOn the right}
You can adjust the volume level between 1 and 6.
Main unit Remote control
D_ uwo ow
(On the left)
DO NOT turn off (standby) the unit with the
volume set to an extremely high level;
otherwise, the sudden blast of sound can damage
your hearing, speakers and headphones when you
turn on the unit or start playback.
Turning off the sound te_por__
Remote control
MUTING
To restore the sound press MUTING again
or adjust the volume
Sound _ode
Sound modes can be selected to enhance the
type of music being played.
Press SOUND MODE to select the sound
mode.
Each time you press the button, the sound
mode changes as follows:
Main unit Remote control
i
Sound mode selection:
BEAT: Set to this position for music with a
heavy beat, such as rock and disco
music.
POP: Set to this position for Nght music
including popular and vocal music.
CLEAR: Set to this position for crisp and dear
sounding music.
FLAT: (no effect): Set to this position not to
apply any sound mode.
The unit turns on.
Main unit Remote control
, Pressand hold I_l_l or _1 to Changethe
1, Tune in to a station YOU want to preset.
3, Press the number button to select a
Toselect P:!5, press ÷!0 then E
select P20, Press÷! Oonce then press ! o.
To listen t0 the preset stations, Press number
buttons t° select the preset number.
receive or noisy, select the monaural reception
Adjusting the antenna
Adjust the FMteiescop!c antenna's length_
angle and d!rection unt!! the best reception is
obtainedi
Using Neadphones
Be sure to turn down the volume before
connecting or putting on the headphones.
, Connecting the headphones deactivates
the speakers.
, Sound adjustments other than the super
woofer volume level also affect the sound
through the headphones.
PP ONES
©
You can program up to 30 tracks from a disc or a
USB devise in any desired order including the same
tracks.
, You can only make a program when playback is
stopped.
, While making a program, you cannot specify a
group number to select a track.
Load a disc or connect a USB device before
making a program.
See [] Playing back a disc!USB device.
1, Press CD _/11 or USB _/11o
@or@
2, Press @to stop playback,
3, Press PLAY MODE to select PROGRAM,
PLAY MODE
4,
5,
Press the number buttons to select the track
to program.
Repeat step 4 to select other tracks for the
program.
, To cancel the last track in the program, press
CANCEL once.
6, Press CD _/H or USB I_/H,
Playback starts.
While stopped:
To confirm the programmed tracks, press
I_i_/_l_l or _/_1 repeatedly; the tracks in the
program will successively appears on the display in
the programmed order.
, To add a trackto the end of the program, press
the number buttons to select the track.
To delete the tracks in the program, press CANCEL
repeatedly.
, Each time you press the button, the last track
in the program is erased.
, Turning off the power also clears the program.
To exit from the program play, press PLAY MODE
repeatedly until the"PRGM" indicator goes off.
i!iiiiiiiiii!i!i!ili
You can play all the tracks, on the disc or USB
devise in random order.
Load a disc or connect a USB device before
random play,
See [] Playing back a dlsc!USB device.
1. Press CD 1_/11or USB I_/11o
2, Press PLAY MODE to select RANDOM,
PLAY MODE
3, PressCD 1,,/11or USBI_/11,
The tracks are played in random order once.
, The I-_@/-_l button works only to go back to
the beginning of the current track during the
random playback.
While paused:
To exit from random mode, press PLAY MODE
repeatedly until the"RANDOM" indicator goes off.
!Tiiiiiii!iiiii!i !!i !
You can repeat a track or tracks on the disc or USB
devise as many times as you like.
Press REPEAT,
REPEAT
Eachtime you pressthe button, the play mode
changes asfollows:
For CDs:
_-i_ALL_ _ _ canceled _ (backto the
beginning)
, _/,-ALL: Repeats all the tracks on the disc.
, [n program mode or
random mode, only _--_ALL
can be selected.
, _: Repeats the current track.
For MP3tWMA flies:
_--_ALL_ _--_GROUP_ _ _ canceled_ (back
to the beginning)
, _--I_ALL: Repeats all the tracks on the
disc or USB devise.
, [n program mode or
random mode, only_ALL
can be selected.
, _GROUP: In normal play mode,
repeats all the tracks in a
group.
, _--_: Repeats the current track.
To exit from the repeat mode, press REPEAT
repeatedly until the repeat indicator goes off.
Y i i
Be sure to hold both handles when you carry
the unit.
If you carry the unit by only one handle, because
of the length of the unit, the end may drag on
the ground and be damaged as a result.
Do not insert any foreign objects into them
which are below the speakers.
Carrying
/i...............
\ o-°
handle
Attach the supplied shoulder belt (adjustable in length) to each end of the system as illustrated.
'K
Main unit
Shoulder belt*
/
iY
//
Main u"nlt
Shoulder belt*
, Remove a disc, USB device or iPod from
the unit.
, Disconnect all the cords from the unit.
o The unit is not waterproof or dust proofl
Shoulder belt*
* Supplied forthis unit.
Stoppeff
Stoppeff
'k.... >'