Loading ...
Loading ...
Loading ...
Forproperorientationofshield,see
KNOWYOURTRIMMERillustrationinOP-
ERATIONsection.
1. Removewingnutfromshield.
2. Insertbracketintoslotasshown.
3. Pivotshielduntilboltpasses
throughholeinbracket.
4. Securelytightenwingnutontobolt.
Shield _'.X/_ I°t
__% Bracket
KNOW YOUR TRIMMER
READ THiS iNSTRUCTiON MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT, Compare the illustrations with your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
Assist Handle
Muffler
Primer Bulb
Fuel Mix
Fill Cap
ON/OFF SWITCH
The ON/OFF switch is used to stop en-
gine. To stop the engine, move switch
to the OFF position.
PRIMER BULB
The PRIMER BULB removes air from
the carburetor and fuel lines and fills
them with fuel. This allows you to start
the engine with fewer pulls on the
starter rope. Activate the primer bulb
by pressing it and allowing it to return
to its original form.
Tube
J
Trimmer
Head
Edge
Guide
Shield i_
Line Limiter
Blade
CHOKE
The CHOKE helps to supply fuel to tile
engine to aid in cold starting. Activate
the choke by moving the choke lever to
the FULL CHOKE position. After the en-
gine attempts to start, move the choke
lever to the HALFCHOKE position. Once
engine has started, move the choke le-
ver to the OFF CHOKE position.
EDGE GUIDE
The EDGE GUIDE protects the unit
from contacting the ground during
edging.
BEFORE STARTING ENGINE
_iWARNING: Be sure to read
the fuel information in the safety rules
before you begin. Ifyou do not
understand the safety rules, do not
attempt to fuel your unit. Call
1-800-235-5878.
FUELING ENGINE
_bWARNING: Remove fuel cap
slowly when refueling.
This engine is certified to operate on
unleaded gasoline. Before operation,
gasoline must be mixed with a good
quality synthetic 2-cycle air-cooled
5
Loading ...
Loading ...
Loading ...