Loading ...
Loading ...
Loading ...
16
Changing user options
Options such as single or double pad programming, beep volume, and
maximum cooking time can be changed to suit individual preferences.
To change options:
1. Open oven door.
• If door is closed or RESET pad is pressed before programming is
complete, changes are discarded and microwave exits programming
mode.
2. Press and hold pad 2 for approximately 5 seconds.
• This begins options mode.
• Microwave will beep and 0P: displays. Microwave is now in
programming mode.
3. Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.
4. Press number pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.
5. Press START pad to save changes.
• To change additional options, repeat steps 3 and 4.
• Changes appear after door is closed or STOP/RESET pad is pressed.
Didn’t like an option?
Factory settings are marked in bold.
To change the oven back to the
factory setting, simply select the
option that is marked in bold.
My changes weren’t
saved.
In order for any changes
to be saved, the START
pad must be pressed after
selecting an option. Shutting the oven
door or pressing the STOP/RESET
pad will not save changes.
Options
STYLE 2
Numbered Pads Display Options (Factory Settings in Bold)
1
End of Cycle Beep
OP:10
OP:11
OP:12
3 second continuous beep
Continuous beep until door is opened
5 beep bursts until door is open
2
Speaker Volume
OP:20
OP:21
OP:22
OP:23
Eliminates beep
Sets volume to low
Sets volume to medium
Sets volume to high
3
Key Beep
OP:30
OP:31
Prevents beep when pad is pressed
Allows beep when pad is pressed
4
Keyboard Enable
Window
OP:40
OP:41
OP:42
OP:43
15 seconds after oven door is opened, keyboard disabled
30 seconds after oven door is opened, keyboard disabled
1 minute after oven door is opened, keyboard disabled
2 minutes after oven door is opened, keyboard disabled
5
Add Time During
Heating
OP:50
OP:51
Prevents adding heating time while oven is heating
Allows heating time to be changed while oven is heating when a memory pad is pressed
6*
Reset Door Open
OP:60
OP:61
Allows oven to resume heating time countdown after door is opened during cycle
Cancels heating time count down after door is opened during cycle.
7*
Maximum Heating
Time
OP:70
OP:71
Allows 60 minutes of heating time
Allows 10 minutes of heating time
8
Manual Operation
OP:80
OP:81
Allows use of preprogrammed pads only
Allows use of manual time entry and preprogrammed pads
9
Double Digit Opera-
tion
OP:90
OP:91
Allows 10 (0-9) preprogrammd pads
Allows 100 (00-99) preprogrammed pads
0
Clean Filter Message
OP:00
OP:01
OP:02
OP:03
Do not display message
Display message for 24 hours every 7 days
Display message for 24 hours every 30 days
Display message for 24 hours every 90 days
*Factory setting may vary by model
Loading ...
Loading ...
Loading ...