Loading ...
Loading ...
Loading ...
–7–
ENGLISHESPAÑOLFRANÇAIS
DOOR REVERSAL
This freezer has been built with the door hinges on the
right. It is recommended to contact a qualified technician
to reverse the door. Do not reverse the door unless you
feel you are qualified to do so. It is necessary to tilt the
freezer backward slightly in order to reverse the door.
Caution: To avoid injury to yourself and/or property,
a second person should assist you during the door re-
versal process.
• Ensure the appliance is unplugged and empty.
• Do not lay the freezer on its back or tilt it more than 45°
when reversing the door, as this damages the cooling
system.
• Have a strong, solid surface/wall to lean the appliance
against so that it does not slip. This will be necessary
when taking o the door.
WARNING: As stated above, ensure that the freezer is
powered o and unplugged before reversing the door.
Tools Required:
• Masking Tape
• Phillips screwdriver
• Flathead screwdriver
• Dull knife or similar flat tool
(to remove hinge cap and hinge cover)
1. Remove all food from the appliance shelves. Tape the
door shut with masking tape.
2. Remove the hinge cover to the upper right hinge. Un-
screw and remove the upper right hinge. Keep the
door secure and vertical, ensuring it does not slip.
3. Li up and remove the door.
4. Remove the door stopper and its screw from the
bottom-right side of the door. Install it on the other
(bottom-le) side of the door. Place the door on a so
surface to avoid scratching.
5. Remove the hinge hole cap from the upper le side of
the unit
6. Tilt the unit slightly toward the rear and prop it
securely. Unscrew and remove the lower hinge and
leveling feet.
7. Swap the lower hinge and feet, then install them on
the opposite side.
8. With the lower hinge now attached to the other side,
place the door on the lower hinge. Ensure the door
is aligned properly so that the gasket/seal closes
completely on all sides.
9. Install the upper hinge on the le side now to fully
secure the door. Aer it is fastened, install the hinge
cover and place the hinge hole cap on the upper
right side of the door.
Loading ...
Loading ...
Loading ...