Loading ...
Loading ...
Loading ...
27
WASHING THE STANDARD PREFILTER
1. The Carbon indicator will glow red when it is time to replace the
Carbon layer.
2. Gently peel away the Prefilter from the fastener strips (Fig. E).
3. Gently peel away the used Carbon layer from the fastener strips (Fig. F).
4. Wrap a new Carbon layer around the filter drum and attach
to the same fastener strips (Fig. G).
5. Replace the Prefilter by wrapping it around the Carbon layer
and attach to the fastener strips (Fig. H).
6. Once the purifier is powered-on, hold the Reset button until
the red Carbon indicator turns off.
1. We recommend that you visually inspect the Prefilter every month,
and clean as needed. At minimum, you should hand wash the Prefilter
every time you change the Carbon filter.
2. Gently peel away the Washable Prefilter from the fastener strips (Fig. E).
3. Gently rinse with running water – allow Prefilter to air dry
before re-installing.
4. Replace the Prefilter by wrapping it around the filter drum and
attach to the fastener strips (Fig. H).
Note: Standard Carbon filter 3-pack (on page 13) will cover 3 Carbon changes
between replacing the entire HEPA drum filter assembly (on page 14).
Fig. E
Fig. F
Fig. G
Fig. H
REPLACING THE STANDARD
CARBON FILTER
Loading ...
Loading ...
Loading ...