Loading ...
Loading ...
Loading ...
9. SETTING THE VACUUM CLEANER
FIG. 9
FIG. 11
9.7 WET VACUUMING READY TO USE
- FIG 10
Refit the Power head down onto the top of the
vacuum cleaner.
Attach the desired attachments, connect to power and
then turn on by flipping the power switch to the ( I )
position.
9.8 WATER LEVEL
To ensure the air flow is adequate, we recommend that
the end of the nozzle is not totally immersed.
When the fluids have reached the highest permittable
level in the tank, the float regulator will cover the motor
air inlet causing the motor to work harder, it will become
noisier, at this point turn off and empty the tank.
9.9 AFTER USE, EMPTY TANK - FIG 11
The cleaner is fitted with a drain plug which makes it
easier to empty water out of the tank into an open drain.
WET VACUUMING
9.6 FITTING FOAM FILTER - FIG 9
Warning! Do not make any of the following adjustments
with the vacuum cleaner connected to the power supply.
Empty the tank and dispose of any dirt/dust which may
have been picked up previously.
Now fit the foam filter . This slides over the float
cage as shown.
NEVER VACUUM DRY DUST AND DIRT WITH THIS
FILTER FITTED AS IT WILL PROVIDE LITTLE OR NO
PROTECTION RESULTING IN MOTOR DAMAGE.
FIG. 10
13
Loading ...
Loading ...
Loading ...