Loading ...
Loading ...
Loading ...
Cleaning and care
19
Cleaning the panel
Follow the instructions under
"Stainless steel housing."
The panel is not suitable for cleaning
in a dishwasher.
Cleaning the grease filters by hand
Clean the filters with a soft nylon
brush in a mild solution of hot water
and dish soap. Do not use undiluted
dish soap.
Unsuitable cleaning agents
Unsuitable cleaners can cause damage
to the filter surfaces if used regularly.
Do not use any of the following:
– Lime removers
– Abrasive powders or abrasive liquids
– Aggressive all-purpose cleaners and
degreaser sprays
– Oven sprays
Cleaning the grease filters in the
dishwasher
Place the filters as upright as possible
in the lower basket. Ensure that the
spray arm is not obstructed.
Use a common dishwashing
detergent.
Select a program with a wash
temperature between 120°F (50°C)
and 150°F (65°C). In a Miele
dishwasher use the "Normal"
program.
Depending on the detergent used,
cleaning the filters in a dishwasher
may cause the inside filter surfaces to
become discolored. However, this will
not affect the functioning of the filters
in any way.
After cleaning
After cleaning, leave the filters on an
absorbent surface to dry.
When removing the panel and filters
for cleaning, also clean off any
accessible oil or grease buildup from
the housing. Doing so will prevent a
fire hazard.
Resetting the filter saturation counter
for the grease filters
Once cleaning is complete, the filter
saturation counter must be reset.
With the deflector plate out, touch the
grease filter control for approx. 3
seconds until the grease filter symbol
goes out.
Loading ...
Loading ...
Loading ...