Loading ...
Loading ...
Loading ...
Dispensers
Dispenser
Bleach dispenser is located in left
front comer under loading door.
Bleach
Use only liquid bleach in
dispenser. To use powdered
bleach, add to wash tub with
detergent.
Carefully pour recommended amount
of bleach intodispenser during first
washer fill. See table.
Be careful not tospill undiluted
bleach. It isa strong chemical and
can damage cabinet finishes and
some fabrics ifnot properly diluted.
Follow bleach manufacturer's labelfor
properuse.
LOAD SIZE BLEACH
(Max Amt.)
SUPER PLUS 1 cup
X-LARGE 1 cup
LARGE 1 cup
MEDIUM 3/4cup
SMALL 1/2cup
Fabric Softener
Dispenser
Fabric softener dispenser is
located on top of agitator.
Dispenser automatically releases
liquid fabric softener at proper time
during rinse cycle.
Fabric
softener
dispenser
Fabric Softener Use Tips
• Liquid fabric softeners are
dispensed during final rinse. Do
not combine with bleach, bluing,
starch, detergents, soaps, or
packaged water conditioners
during rinse.
• Do not use fabric softener in
dispenser during DOUBLE WASH
cycle.
• Do not mix powdered detergent
with liquid softener in dispenser or
softener will become gummy.
To use dispenser, follow these steps:
1. Pour liquid fabric softener into dispenser, using amount recommended
on package.
Add water up to fill level, but do not exceed tip of fill arrow indicator.
FABRIC SOFTENER MUST BE DILUTED FOR USE.
• Do not stop washer during first spin or dispenser will empty too
soon.
• Never pour fabric softener directly onto clothes or spots and stains
may result. To remove softener stains, soak in soapy solution of
Sard TM Wonder Soap or IvoryTM soap, or rub stain with bar of Sard TM or
Ivory TM soap and wash garment as usual.
• For best softener performance, set water level to medium or higher.
Clean softener dispenser after
each use. Remove dispenser
housing from agitator by
squeezing lowerpart of dispenser
and pullingup on housing while
tiltingslightly to expose
dispenser cup. Rinse dispenser
housing and cup in hot soapy
water.
Clean funnel shape in top of
agitator and inside of agitator. Use small brush on hole and
funnel rings for thorough cleaning.
After cleaning, re-install dispenser cup. Push dispenser housing
directly down onto top of agitator until firmly snapped together.
To prevent build-up, fill dispenser with clean water in wash cycles when
not using softener.
Loading ...
Loading ...
Loading ...