Loading ...
Loading ...
Loading ...
SERVICE AND ADJUSTMENT
HOW TO ADJUST
THE HEIGHT OF THE HANDLE
Use the knobs, on each side of the handle, to
adjust the height of the handle.
1. Hold the handle withone hand and loosen
both knobs untilthe ratchet teeth are dis-
engaged. Do not remove the knobs. See
Figure 17.
2. Move the handle up or down to the de-
sired position, then align the ratchet
teeth. Make sure both sides of thehandle
are level.
3. Tighten the knobs.
Handle
Ratchet
Knob
Figure17
HOW TO SET THE HEIGHT OF CUT
CAUTION: Before you set the
_lb height of cut: stop the engine.
Wait for all moving parts to stop.
Allow the engine to cool and dis-
connect the spark plug wire.
The height of cut can be set from 1-1/2 inches
to 3 inches. Recommended cutting height for
the average yard is 2".
1. Use 61eT-wrench, found in the parts bag,
to loosen the set screw shown in
Figure 18.
2. Set the trimmer head at the desired
height
3. Tighten the set screw.
Height Of Cut Positions
Trimmer
Set Screw ._ Head
T-Wrench
HeightGuide
Figure 18
F-O00211M 17
Loading ...
Loading ...
Loading ...