Loading ...
Loading ...
Loading ...
7
Reversing the Door Swing (select units)
If you find the direction of opening the door of the appliance inconvenient, you can change it. Holes
on the opposite side have already been prepared at the factory.
This appliance can be opened from either the right side or the left. By default, the door hinge is on
the right side. If you prefer it on the left, please follow these instructions:
1. Take off the upper hinge cover from the door and remove the screws that hold the top hinge.
2. Lift the hinge straight up to free the hinge pin from the socket in the top of the door.
3. Lift the door up and away to free its bottom socket from the hinge pin.
4. Remove the screws to the bottom hinge.
5. Remove the decorative caps from the opposite side and plug the holes from the original side
with the decorative caps.
6. Move the bottom hinge to the opposite side and tighten the screws. Use any lock washers or nuts
if they were installed in the original installation.
7. Replace door onto the hinge pin on the bottom hinge. Place top hinge pin into door. Insert
screws into the top hinge and tighten.
8. Check the gasket. It should not be creased and should seal well.
Door Handle Installation:
The door has two screw holes on each side, allowing you to install a handle (included). To do so, align
the handle with the screw holes on the side you prefer. Fix the handle in place with the included
screws, then cover the screw heads with the handle seal (included).
Loading ...
Loading ...
Loading ...