Loading ...
Loading ...
Loading ...
13INSTALLATION
ENGLISH
Dimensions and Clearances
• Check the dimensions of the appliance and the installation path to ensure there is sufficient room to
move the refrigerator through doors or narrow openings.
• If an opening is too narrow to fit the refrigerator through, remove the refrigerator doors. See Removing/
Assembling the Doors and Drawers in this manual.
• The installation location chosen for the refrigerator should allow space behind the unit for connections
and airflow and space in front to open the doors and drawers.
• Too small of a distance from adjacent items may result in lowered freezing capability and increased
electricity consumption charges. Allow at least 2 inches (50 mm) between the back of the refrigerator
and the wall.
• Remember to allow enough room in front of the refrigerator to fully open the doors and drawers.
Removing/Assembling
Doors
If the entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
CAUTION
• Use two or more people to remove and install
the refrigerator doors.
• Disconnect the electrical supply to the
refrigerator before installing.
• Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator.
• Be careful when handling the hinge and hinge
lever.
• Remove food and bins before detaching the
doors.
• Do not hold the handle when removing or
replacing the doors as the handle may come off.
- Dimension/Clearance
LRSDS2706*,
LRSXS2706*,
LRSOS2706*
LRSOC2306*,
LRSXC2306*
A Depth 33 15/32" (850 mm) 28 15/16" (735 mm)
B Width 35 29/32" (912 mm) 35 29/32" (912 mm)
C Height to Top of Case 68 29/32" (1750
mm)
68 29/32" (1750
mm)
D Height to Top of Hinge 70 15/32" (1790
mm)
70 15/32" (1790
mm)
E Back Clearance 2" (50 mm) 2" (50 mm)
F Depth without Door 28 15/16" (735 mm) 24 7/16" (620 mm)
G Depth (Total with Door Open 90°) 51" (1295 mm) 46 7/16" (1180 mm)
B
A
C
D
F
H
E
G
UUGGwGXZGG{SGqGXZSGYWYXGGXXaW\Ght
Loading ...
Loading ...
Loading ...