Loading ...
Loading ...
Loading ...
5
f. Install hose onto plastic spout.
7. Install horizontal pan on right side of coil assembly.
8. Slide coil assembly into casing. Be sure coil bracket on each
corner of vertical pan engages coil support rails.
9. Reinstall 2 snap- in clips to correctly position and secure
coil assembly in unit. Be sure clip with large offset is used
on right side of unit to secure horizontal pan.
10. Remove two oval fitting caps from left side of the coil, ac-
cess panel, and fitting panel.
11. Remove insulation knockouts on right side of coil access
panel.
12. Remove 2 oval coil access panel plugs and reinstall into
holes on left side of coil access panel and fitting panel.
13. Install condensate pan fitting caps (from Step 10) in right
side of coil door making sure that cap snaps and seats clean-
ly on back side of the coil door. Make sure no insulation
interferes with seating of cap.
14. Reinstall access and fitting panels, aligning holes with tub-
ing connections and condensate pan connections. Be sure to
reinstall metal clip between fitting panel and vertical con-
densate pan.
Make sure liquid and suction tube grommets are in place to prevent
air leaks and cabinet sweating.
COIL MOUNTING
SCREW
BLOWER
ASSEMBLY
REFRIGERANT
CONNECTIONS
SECONDARY DRAIN
PRIMARY DRAIN
DRAINPAN
SLOPE COIL
SKI
COIL
SUPPORT
RAIL
A03001
Fig. 5 - Slope Coil in Horizontal- Right Application (FE4A only)
Loading ...
Loading ...
Loading ...