Loading ...
Loading ...
Loading ...
- 5 -
08/2019
Copyright © 2019, Fast ČR, a.s.
EN
Food Chopper
User'smanual
■ Prior to using this appliance, please read the user’s manual
thoroughly, even in cases, when one has already familiarised
themselves with previous use of similar types of appliances.
Only use the appliance in the manner described in this
user’smanual. Keep this user’smanual in asafe place where it
can be easily retrieved for future use.
■ We recommend saving the original cardboard box, packaging
material, purchase receipt and responsibility statement of the
vendor or warranty card for at least the duration of the legal
liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance
in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Pulse button
for turning the motor unit
on and o
A2 Motor unit
A3 Lid
A4 Blade assembly
with four titanium coated
chopping blades
A5 1-litre glass bowl
A6 Anti-slip ring
BEFORE FIRST USE
■ Take the appliance and its accessories out of the packaging
materials.
■ Wash the lid A3, blade assembly A4, bowl A5 and anti-slip ring
A6 in warm water using kitchen detergent. Then rinse with
clean water and allow it to dry naturally or dry it out using
awiping cloth.
Note:
The parts listed above, excluding the blade assembly A4,
are suitable for washing in adishwasher.
Attention:
When cleaning the blade assembly A4, be very
careful not to injure yourself on its sharp edges.
■ Never wash the motor unit A2 under running water or
submerge it in water.
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
■ Before you start assembling or disassembling the appliance,
check that the motor unit A2 is turned o and disconnected
from the power socket and that the rotating parts have come to
acomplete stop.
■ Place the anti-slip ring A6 on to adry, even and stable surface
and put the bowl A5 into it.
■ Now assemble the blade assembly A4. It consists of two parts,
the top and bottom chopping blades. Hold the top chopping
blades by the middle part and seat them on to the bottom
chopping blades from above, and then turn them in one
direction or the other so that both parts t into each other. For
a rm connection of both parts, hold the bottom chopping
blades with one hand and use the other hand to hold the top
chopping blades and turn them anticlockwise until they lock
into place.
Attention:
When handling the chopping blades, be very
careful not to injure yourself on their sharp cutting
edges. Only touch the plastic central part of the
chopping blades.
■ Put the assembled blade assembly A4 on to the central pin at
the bottom of the bowl A5, and put the lid A3 on to the bowl
A5. The shape of the lid enables it to be seated in only one
direction. Push the lid A3 down so that it adheres to the edge of
the bowl A5 along its entire perimeter.
Attention:
When handling the the blade assembly A4, be very
careful not to injure yourself on its sharp edges.
Always hold the blade assembly by its central part.
■ Put the motor unit A2 on to the lid A3 so that it ts in properly.
Now the appliance is assembled.
■ To disassemble, proceed in reverse sequence.
OPERATING THE APPLIANCE
■ Assemble the chopper according to the instructions in the
chapter Assembling and disassembling the appliance. Put the
ingredients into it after seating the blade assembly A4 on the
central pin at the bottom of the bowl A5. Do not ll the bowl A5
above the maximum mark (1 l).
■ Connect the power cord to apower socket and press the pulse
button A1 to start the chopper. Hold down button A1 for afew
moments and then release it. When the button A1 is released,
the chopper will stop. If the food inside is not suciently
chopped up, run the chopper again for ashort time. Short pulse
switching will limit excessive pulverisation of the food. Hold the
bowl A5 with one hand during operation.
Attention:
The maximum continuous operating time of the
appliance is 20 seconds. Then allow it to cool down
for 2 minutes.
■ If food is sticks to the inside of the bowl A5, turn o the chopper
and disconnect it from the power socket. Make sure that the
blade assembly A4 has stopped rotating. Remove the motor
unit A2 and the lid A3. Clean the inside of the bowl A5 using
a spatula. Assemble the chopper, plug the power cord into
apower socket and continue processing food.
■ When you nish using it, disconnect the power cord from
the power socket. Make sure that the blade assembly A4 has
stopped rotating. Remove the motor unit A2 and the lid A3.
First, carefully take the blade assembly A4 out of the bowl A5
and only then empty out its contents.
■ Then clean all used parts according to the instructions in
chapter Cleaning and maintenance.
QUICK GUIDE TO PROCESSING INGREDIENTS
■ First, cut up the food into smaller cubes of approximately
2 × 2 cm and only then process with the chopper. With
vegetables like onion, it is sucient to cut them into quarters.
Ingredients Maximum
load
Total processing
time
Meat 300 g 20 s
Fruit and vegetables 200 g 15 s
Hard and semi-hard cheeses 150 g 10 s
Nuts with shells removed 100 g 15 s
Herbs 50 g 10 s
Note:
The above food processing times are only a reference.
The actual processing time depends on the size of
the ingredients, their amount and the required nal
consistency.
Loading ...