Loading ...
Loading ...
Loading ...
9
Operation (continued)
Cooking (continued)
3
Press Start; the cooking will
start and the time will count
down in the display. At the end of
cooking, five beeps will sound.
NOTES:
For reheating, use P10
(HIGH) for liquids, P7
(MED-HIGH) for most
foods, and P6 (MEDIUM)
for dense foods.
For defrosting, use P3
(MED-LOW).
Please refer to the defrosting
chart and the defrosting tips
& techniques on page 11.
In order to protect the product
from overcooking, by cooking
at P10 power for an extended
period of time, the power level
will automatically change to
P8 after 15 minutes.
DO NOT OVERCOOK: This
oven requires less time to cook
than older units. Overcooking
will cause food to dry out and
may cause a fire. A microwave
oven’s cooking power tells you
the amount of microwave
power available for cooking.
Stage Cooking:
For more than one stage of
cooking, repeat steps 1 and 2 for
each stage of cooking before
pressing Start. The maximum
number of stages for cooking is
three. When operating, a beep
will sound between each stage.
Five beeps will sound at the end
of the entire sequence.
P10 and P9 can be set only once
in the stage cooking, and if the
P10 or P9 is set in any stage,
only P8 or less can be set for the
rest of the stage.
Setting a Standing
Time
1
Some recipes call for a
standing time after cooking.
To do this, repeat steps 1 and
2 in the Cooking section on
previous page. Then press
Timer.
2
Set desired amount of
standing time using Number
pads (up to 99 minutes 99
seconds).
3
Press Start. The timer will
start and then beep once at
the end of cooking time (the
beginning of standing time).
Five beeps will sound when
standing time is done.
Setting a Delayed
Start
1
The start time can be delayed
to start cooking at a later
time. To do this, first press
Timer.
2
Enter the desired delay time
(up to 99 minutes 99
seconds) using the Number
pads.
3
Press Power Level until the
desired power level appears
in the display. P10 is the
highest and P1 is the lowest.
4
Set Cooking Time using the
Number pads (see previous
page for maximum times).
5
Press Start; the delay time will
count down, then cooking will
begin. At the end of cooking,
five beeps will sound.
NOTES:
When each stage finishes,
the oven will beep once. At
the end of the program, the
oven will beep five times.
If the oven door is opened
during Standing Time,
Kitchen Timer or Delay
Time, the time on the
display will continue to
count down.
Standing Time and Delay
start cannot be
programmed before any
automatic function. This is
to prevent the starting
temperature of food from
rising.
Stage Cooking can be
programmed including
Standing Time and Delay
Start.
Loading ...
Loading ...
Loading ...