Loading ...
Loading ...
Loading ...
Control Pad Functions
CLEAR PAD-- Used to
clear any function
previously entered
except the time of day
and minute timer. Push
CLEAR to stop cooking.
\
BAKE PAD Used to
enter the normal "\- _\
baking mode
\.
e
temperature. '-._@ _ _
BROIL PAD .
Used to select_ g O g OVEN
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For
satisfactory use of your oven, become familiar with the various functions of
the oven as described below.
UP and DOWN ARROW PADS-- Used along with the
function pads to select oven temperature, cooking
time, stop time (when programming an automatic
stop time), time of day, clean time and minute timer.
PREHEAT
e LOCK
CLOCK PAD Used
to set the time of
day.
.FEATURE
/ /_ INDICATOR
LIGHTS These
J
/. light to show which
feature is in use.
the variable -_-_@_
broil function.
/
/
J
CLEAN PAD
Used to select
the self-cleaning
cycle.
BAKE TIME PAD
Used to enter the
O O length of the
@ _baking time.
STOP TIME PAD
OVEN, PREHEAT & LOCK LIGHTS-- The "OVEN" light
will glow each time the oven unit turns on to maintain
the set oven temperature. The "PREHEAT" light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven
temperature. The "LOCK" light will flash until the door
locks when the self-clean cycle is in use. It glows
constantly after the door locks.
The oven can be p_og_a_n tied to:
• Bake normally
• Time bake
• Broil
• Self-clean
TIMER PAD--
Used to set or
cancel the minute
timer. The minute
timer does not
start or stop
cooking.
Used to set the
desired stop time
for baking. Can be
used with BAKE
TIME to program a
delayed bake cycle.
For as entcon%'o pane:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be
programmed for silent operation. Push and hold @. After 7 seconds, the control will beep once. This will block the
controls from sounding when a pad is pushed. To return the sound, push and hold @ again for 7 seconds until 1
beep is heard.
Note: The control will return to the audible mode after a power outage.
....... , , _ s +, .
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push @." " appears in the display.
2. Push and hold the (_ until "HI" appears in the display.
3. Push and hold @ until °For °C appears in the display.
4. Push the (_ or (_ to change °Fto °C or °Cto °F.
5. Push any function pad to return to normal operating mode.
Loading ...
Loading ...
Loading ...