Loading ...
TROUBLESHOOTING
If the water pump fails to operate, check the following:
1. If the pump cannot pump water check if the power is correctly connected or check if sufficient water
is inside the reservoir.
(a) Check the pump and tubing for any form of obstructions.
(b) Remove the cover with the pump flow adjuster on it and gently lever off the inner cover to reveal
the pump impeller and gently turn the rotor to check that it is not broken or jammed.
2. If the pump runs with slow water circulation check the following:
(a) The flow control on the body of the pump.
(b) Ensure the pump is completely submersed.
3. If any abnormal sould is heard during the pump operation, ture off the power supply and check
the rotor assembly as follows:
(a) Remove the pump cover and rotor plate from the front.
(b) Grip the impeller and gently take out the rotor assembly from the pump.
(c )Rinse the motor assembly and the housing with clean water in order to remove any grit or debris.
(d) If any breakage or surface damage is found on the rotor assembly, pls contact you supplier,
if replacement needed.
We hope you continue to enjoy you water feature for many years. Over time the paint finish will
gradually mellow in colour, this is part of the natural weathering process.