Loading ...
Loading ...
Loading ...
CAREANDCLEANING
Control Panel - clean with a soft, damp
cloth.Do not use abrasivesubstances.
Tumbler - remove anystains such as cray-
on, ink pen or fabric dye (from new items
such astowels or jeans)with an all-purpose
cleaner.Then tumble old towels or rags to
remove any excess stain or cleaning sub-
stance. Once these steps are done, stains
maystill be visible,but shouldnottransferto
subsequentloads.
Cabinet- wipe off any markswithsoap and
water.
Dryer Exhaust System - should be
inspectedand cleanedonce a year to main-
tain optimum performance, The outside
exhaust hood should be cleaned more fre-
quentlyto ensureproper operation.(Referto
the Installation Instructions for more infor-
mation.)
REPLACINGTHEDRUMLIGHT
Instructionsfor replacingthe bulb:
1)
2)
Unplug or disconnect the dryer from the
electrical powersupply.
Open the door and usea Phillipsscrew-
driverto removethe screwattachingthe
lensto the tumbler front.
3) Remove lens cover by pulling cover
toward center of tumbler.
4)
5)
6)
7)
Rotate bulb counter-clockwise to
removefrom socket.
Replacethe bulbwitha 120volt, 10 watt
maximumcandelabrabase light bulb.
Turnthelight bulb clockwiseinto socket.
Replace lens cover by hooking plastic
tabs into tumbler front below the light
housing.
8) Reinstall the screw intothe lens cover
screw hole.
9) Reconnect dryerto powersupply.
REVERSIH5[fiEDOOR
7
Directionsfor reversingthe dryer door:
1) Remove the hinge hole covers and
screws.
2)
3)
While supporting the door, remove 2
screws in the hinges that secure the
hinges to the cabinet.
Remove door by lifting slightly at the
hinges and pulling the hinge tabs out of
the hinge slots.
.............. i
n
I o _ a
--J :,
4) Movethe following parts to the opposite
side of the door: 2 hinges and 4 hinge
screws, 4 door screws,door strike and
screw, inner door cover plateand screw,
5) Attach the door to the opposite side of
the cabinet using the 2 counter sunk
hinge screws. (See below). Screw the
.... Door Catch
lowerhinge screwin first.This will help to
align the door and hinges.
6) Replace the hinge hole covers to the
opposite side.
Door
"_Screws
Loading ...
Loading ...
Loading ...