Loading ...
Loading ...
Loading ...
Air Conditioner Features
(continued)
TIMER: DELAY STOP / START
FEATURE:
DO THIS:
PRESS
TIMER BUTTON
YOU WiLL SEE:
THEN
DO THIS:
PRESS
TEMP_IMER
BUTTON
Note: For Delay Stop, the unit must be in the On position.
LIGHT On
Note: For Delay Start, the unit must be in the Off position.
To adjust timer setting, tap or hold the UP arrow( A ) or the DOWN arrow(It) to change delay timer at .5 hour increments, up to 10
hours, then at 1 hour incremer_s up to 24 hours. The control will count down the time remaining until start (8, 7.5, 7, etc.). The Delay Start
mode automatically selects cooling with maximum Fan Speed. The temperature maintained will be the same as previously set. To change
the set temperature, press "COOL" then Up or Down arrows ur_il the control will automatically change the display back to the hours re-
maining until the unit will start/stop. Turning the unit "ON" or "OFF" at any time will cancel the Delay Start!Stop function.
The Delay Start/Stop Feature will work until the unit either starts or stops. Once that happens the above steps have to be repeated again.
LIGHT On
SLEEP FEATURE: YOU WiLL SEE:
DO THIS:
PRESS SLEEP
BUTTON
The Sleep Mode can be selected with a Heating or Cooling Mode. Note: In this "MODE" the selected temperature will increase by 2 degrees F,
80 minutes after the mode is selected. The temperature will then increase by another 2 degrees F after an additional 80 minutes. This new tem-
perature will be maintained for 7 hours before it returns to the originally selected temperature. If this Mode is selected with Heat, the set tem-
perature will decrease at the same time pattern. This ends the "Sleep" MODE and the unit will continue to operate as originally program-
med. The "Sleep" MODE program can be cancelled at anytime during operation by again pressing the "Sleep" button.
CHECK FILTER FEATURE: YOU WiLL SEE:
LIGHT On
DO THIS:
PRESS TO RESET
Note: This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The LED (light) will illuminate
after 250 hours of operation. To reset after cleaning the filter, press the "Check Filter" button and the light will go off.
8
SZ000302(En)-YaoKong(1018) 6 10/z5/2004 2 33 PM
Loading ...
Loading ...
Loading ...