Loading ...
Loading ...
Loading ...
OPERATIONAL INSTRUCTIONS
16
Unlock the Seat from the Rail. Hook the
Handlebar to the steel wire Hook at the front
of the Seat. You can do the following exercises
with your Conversion II ® 9003.
Be sure to step on the iron Foot Plate.
Be sure to step on the iron Foot Plate.
The safety and integrity designed into the Conversion II ® 9003 can only be maintained when the
Conversion II ® 9003 is regularly examined for damage and wear. Special attention should be given to
the following:
1. Adjust the TENSION KNOB(27) and verify that the Magnetic System provides tension. The Magnetic
System should provide many years of use.
2. Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the
left pedal has left hand threads and is tightened by turning counterclockwise.
3. Clean the roller tracks in the RAIL(52) with an absorbent cloth.
4. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten
loose nuts and bolts.
5. Verify that the CAUTION LABEL(129) is in place and easy to read. Call Stamina Products immediately at
1-800-375-7520 for a replacement CAUTION LABEL(129) if it is missing or damaged.
6. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
7. Worn or damaged components shall be replaced immediately or the Conversion II ® 9003 removed from
service until repair is made.
8. Only Stamina Products supplied components shall be used to maintain/repair the Conversion II ® 9003.
9. Keep your Conversion II ® 9003 clean by wiping it off with an absorbent cloth after use.
MAINTENANCE
LEG STRETCH
BUTTOCKS
LEG EXTENSION
Loading ...
Loading ...
Loading ...