Loading ...
Loading ...
GETTING TO KNOW
YOUR KETTLE
USING THE UNIT
Spout with removable scale filter
Cool touch spot to close
Lid release button
Digital control panel
Water level gauge 1.7L capacity
360° swivel base
Not shown
Fast boil 3000W
Safety auto shut o
Boil dry protection
Did you know that temperature can directly
impact the taste of your favourite drink?
6 pre-set temperatures at the touch of a button ranging from
60°C - 100°C means no more burnt coee or tea. Whether you prefer green,
oolong or herbal tea or freshly ground coee the kettle lets you select from
6 pre-set temperatures for the perfect cup every time.
1
HOLD TEMP
The kettle has a Hold Temp feature which holds water at the
selected temperature for up to 30 minutes. If not using water
right away, press the Hold Temp button before, during, or
within 30 seconds of completion of a heating cycle.
After 30 minutes of holding the temperature the Hold Temp
will automatically deactivate. If the kettle is removed from the
base at any point during the 30 minutes, then Hold Temp will
be deactivated.
1.
Fill with the desired amount of water using the water level
window as a guide. Close the lid and set the kettle on the power
base.
Before using the kettle, refer to the Before First Use section on page 5 of the Instructions.
Did you know?
Filling the kettle with only the minimum amount of water
needed can save both time and energy.
Powering o:
The kettle will automatically enter sleep mode after 5 minutes
of inactivity. To manually power o, press and hold the
START/STOP button for 3 seconds. To waken the kettle, press
anywhere on the control panel or lift the kettle o the base.
2.
Select a preset temperature or use the +/- controls to manually
set the temperature from 40°C to 100°C increments.
3.
Press START/STOP once to start the heating cycle. The water
window will illuminate, and the display will show the current
temperature as it climbs. Once the selected temperature has been
reached, the unit will beep and automatically shut o.
NOTE: ONLY fill with water. DO NOT fill with other liquids.
NOTE: To change from Fahrenheit to Celcius, press and hold
the Hold Temp and Plus buttons for 5 seconds.
NOTE: If 100°C/BOIL is selected, the temperature will hold at
93°C for up to 30 minutes.
NOTE: To turn o the audible beeps, press and hold the Hold
Temp and Minus buttons for 5 seconds.
NOTE: Hold Temp will only activate when a heating cycle is
active. If Hold Temp is pressed before a heating cycle, you
must press START/STOP to start the heating cycle.
Loading ...
Loading ...
Loading ...