Loading ...
Loading ...
Loading ...
Generac Portable Products 2100 PSI PressureWasher
ASSEMBLY
IMPORTANT: Read entire owner's manual before you
attempt to assemble or operate your new pressure washer.
Remove Pressure Washer From
Carton
I, Remove the parts bag,accessories, and inserts included
with pressure washer.
2, Slice t_vo corners at the end of c_rton from top to
botr;om so the panel can be folded down flat,
3, Remove pressure washer from carl;ore
Carton Contents
Items in the carton include:
Main Unit
Handle
High Pressure Hose
Spray Gun
Nozzle Extension
Safety Goggles
Oil Bottle
Parts Bag (which includes the following):
Owner's Manual
Engine Manual
Owner's Registration Card
Handle Attachment Hardware
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helplfne at 1-800-270-1408. If calling for
assistance, please have the model, revision, and serial
number from the data tag available.
To prepare your pressure washer for operation, you
will need to perform these tasks:
I. Fillout and send in registration card.
2. Attach handle to main unit.
3. Add oil to engine crankcase.
4. Add fuel to fuel tank.
5. Connect high pressure hose to spray gun and pump.
6, Connect water supply to pump,
7. Attach nozzle extension to spray gun.
Attach Handle
I. Place handle assembly onto handle supports connected
to main unit, Make sure holes in handle align with
holes on handle supports (Figure I).
Alig
Handle
Supports
NOTE: It may be necessary to move the handle supports
from side to side in order to align the handle so it will slide
over the handle supports.
2. Insert carriage bolts through holes from outside of
unit and aI;t'.acha plastic knob from inside of unit
(Figure 2).Tighten by hand.
5
.
Insert one "L" hooks through hole just under billboard
on lefl;side of handle (viewing from rear of unit). Hold
hook fn place with pliers and attach Iocknut with
7/16" wrench (Figure 3),
;prayGun
Hook
4.
Insert other"L" hook through hole iust above
billboard on right side of handle (viewing from rear of
unit). Hold hook fn place with pliers and at_ch Iocknut
with 7/16" wrench (Figure 3),
/
6
Loading ...
Loading ...
Loading ...