Loading ...
Loading ...
3
Contents:
Assembly the kit
1. Nozzle unit:
Twist the misting nozzle to the nozzle connector by hand in clockwise direction, ensure the
nozzle is tightly secure but not over twisted.
2. The misting ring:
Use the [1/4” misting ring tubing long] to link up the 6 [nozzle units] from 1. Insert the
tubing into the nozzle connector’s side hole. Make sure the tubing is in line with the hole,
then insert tube into connection hole until it stops; may need some strength.
CAUTION! If tube has not been inserting properly, leakage may result. To redress the
leakage, twist and shake the tube, then re-insert the tube into the connector.
Loading ...
Loading ...
Loading ...