Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
34
Before installation
Before installation, it is important
to read the information contained in
this chapter and in the “IMPORTANT
SAFETY INSTRUCTIONS” chapter.
Information is subject to change. Please
refer to our website to obtain the most
current product specification, technical
& warranty information.
Installation recommendations
- To achieve optimum vapor extraction,
the hood must be centered over the
cooktop, not to the side.
- The cooktop should be no wider than
the hood. Preferably, it should be
narrower for better extraction.
- The mounting area must be easily
accessible. The ventilation hood
should be easy to reach and
disassemble in case a service call is
necessary. This should be taken into
consideration when planning the
position of cabinetry, shelves,
ceilings or decorative elements in the
vicinity of the ventilation hood.
Installation materials
1 non-return flap
for fitting into the exhaust socket on
the motor unit (not needed for
recirculation mode). Depending on the
model, the non-return flap may already
be mounted.
4mounting plates
for installation in a 23 ⁵/₈" (600mm)
wide cabinet
2brackets
for installation in a 35 ⁷/₁₆" (900mm)
wide cabinet (only for 35 ¹/₄" (896mm)
wide appliances)
2 spring clips
for installation in a 35 ⁷/₁₆" (900mm)
wide cabinet (only for 35 ¹/₄" (896mm)
wide appliances)
1 spacer strip
for concealing the gap between the
rear of the appliance and the wall
Loading ...
Loading ...
Loading ...