Loading ...
Loading ...
Loading ...
Refrigeratordoor
1. Removethehandlescrewcover.Dependingonyourmodel,
seeGraphic6-1or6-2.
2. Removethehandlescrews.Keepallpartstogether.See
Graphic6-3.
3. Removedoorhingeholeplugfromtherefrigeratordoor.Move
totheoppositesidehingeholeasshown.SeeGraphic3.
4. Removethedoorhandlesealingscrews.Movetoopposite
sideoftherefrigeratordoor.SeeGraphic4.
5. Removedoorhandlesealscrewfront.Movetooppositeside
ofrefrigeratordoorasshown.SeeGraphic7.
6. Removedoorstop.Movetooppositesideofrefrigeratordoor
asshown.SeeGraphic5.
7. Positiontherefrigeratorhandleontheoppositesideofthe
refrigeratordoor.Drivethetwotopscrews.Then,alignthe
lowerportionofhandleanddrivethebottomscrew.See
Graphic6-3.
8. Tightenallscrews.
9. Replacethescrewcover.Dependingonyourmodel,see
Graphic6-1or6-2.
10.Setasidetherefrigeratordooruntilthebottomhingeis
installedontheproduct.
Contour Door
Graphics are included later in this section.
Round-Head Door Handle Door Hinge
Handle Screw Screw Hole Plug Hole Plug
Cabinet
1. Remove _1_" hex-head hinge screws from handle side and
move them to opposite side. See Graphic 1-1.
2. Remove cabinet hinge hole plugs from the cabinet top and
move them to opposite side hinge holes as shown in
Graphic 1-2.
Doors
1. Remove door hinge hole plug from top of freezer door. Move
to opposite side as shown in Graphic 2.
2. Remove door stop from both the freezer and refrigerator door.
See Graphic 3.
NOTE: When reversing the door, the freezer handle becomes the
refrigerator door handle and the refrigerator door handle becomes
the freezer handle. See Door Handle Reversal graphic.
3. Remove freezer handle assembly as shown. Keep all parts
together. See Graphic 4.
4. Remove refrigerator handle assembly as shown. Keep all
parts together. See Graphic 5.
5. Rotate and position handle from refrigerator door onto freezer
door and assemble as shown in Graphic 6.
6. Rotate and position handle from freezer door onto refrigerator
door and assemble as shown in Graphic 7.
7. Reinstall door stops to opposite side. See Graphic 8.
Replace Doors and Hinges
NOTE: Graphic may be reversed if door swing is reversed.
1. Replace the parts for the bottom hinge as shown and tighten
screws. See Bottom Hinge graphic. Replace the refrigerator
door.
NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors in place while you are working.
2. Assemble the parts for the center hinge as shown and tighten
all screws. See Center Hinge graphic. Replace the freezer
door.
3. Assemble the parts for the top hinge as shown in Top Hinge
graphic. Do not tighten screws completely.
4. Line up the doors so that the bottom of the freezer door aligns
evenly with the top of the refrigerator door. Tighten all screws.
Final Steps
1. Check all holes to make sure that hole plugs and screws are in
place. Reinstall top hinge cover. See Top Hinge graphic.
NOTE: On the left-hand side of the base grille there is a
removable tab which is a bottom hinge hole plug. Break off
the tab from the base grille and insert the bottom hinge hole
plug into the bottom hinge holes. See Base Grille graphic.
2. Replace the base grille. See Base Grille graphic.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong,
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrica_ shock,
3. Plug in refrigerator or reconnect power.
4. Return all removable door parts to the doors and food to the
product.
Loading ...
Loading ...
Loading ...