Loading ...
Loading ...
Loading ...
Use the brush/crevice toe[ attachment to vacuum clean the Sani°Punch nozzle.
£ottom
Fellow the instructions below for washing the Sani-Punch bottom pla[e.
(Do not soak the entire body of the vacuum nozzle in water; it may cause the vibrator to
malfunction )
1. Press the button on the rear side of the 4, Straighten the vibration plate on the lower
vacuum nozzle to separate the bottom plate, section, v brationplate
2, Wipe all the soiled parts of the vacuum
nozzle body with a cloth
3. Wash the removed bottom plate with water
and dry iL
Bo_omptate_
5. Insert the attactlment _ojections on bottom
plate into the vacuum nozzle groove&
Since the vibratorinsidethe Sani-Punchis composedof precisionparts,never disassemble the
_ni-Punch body.
carefulnotto letforeign objectsclog the air inlet on topof the Sani-F_Jnchne_ie.
Sinceremovalof the vibration platemay causeperformance problems,do not warp or removeit.
Att_h the bottomplate properlybeforeusing.Withoutthis bottom plate,it may not function°
Sincethis v_uum nozzlehas been madeexclusively for cleaningmattresses,lightblankets, sheets
and drapes,use it onlyfor these cleaningpurposes.(Usingitto cleanthe fl_r may resultin soiting
it or adrop in performance,so do not use it for such purposes.)
o13-
6. Push down the tabs to secure,
Loading ...
Loading ...
Loading ...