Loading ...
Loading ...
Loading ...
EN-8
EN
Automatic rotating curling iron
SHS 0900GD
Copyright © 2020, Fast ČR, a.s. Revision 04/2020
Note:
If you change the temperature after the appliance has finished heating up, the ready
indicator will gradually light up on the display A6. When the curling iron heats up,
the ready indicator will be lit.
Note:
Alower temperature is suitable for fine, dyed and damaged hair. A higher
temperature is suitable for normal, thick and strong hair.
Setting the rotation speed of the cylinder
Repeatedly press button A10 until “R” appears on the display A6.
Use the + or – buttons to set the desired rotation speed of the cylinder. The speed can be
set in the range from 1 to 5, where speed 1 is the lowest and speed 5 is the highest.
Setting the hair strand wound on time
Repeatedly press button A10 until “T” appears on the display A6.
Use the + or – buttons to set the time for which the hair strand will remain wound on to the
cylinder A2. The time can be set in the range from 3 to 12 seconds.
Using the curling iron
1. Thoroughly comb out your hair before use.
2. Set the desired temperature, cylinder rotation speed and when necessary also the hair
strand wound on time.
3. Hold the curling iron with one hand vertically next to the hair strand.
4. Carefully wind ahair strand around the cylinder A2 and then press the rotate right button
A4 or the rotate left button A5. The tines will help the hair strand to automatically wind
on to the cylinder A2.
Note:
It is important for the rotate right button A4 or rotate left button A5 to be held
down for the entire winding time.
5. Once the whole (or as necessary only its part) hair strand is wound on to the cylinder A2,
release the rotate right button A4 or the rotate left button A5 and wait afew seconds for
the hair strand to heat up. If you have set the time for which the hair strand is to remain
wound up on the cylinder A2, abeep will be made after this time elapses. This indicates
that you should release the hair strand from the cylinder A2.
6. In order to release the hair strand from the cylinder A2, carefully pull the curling iron
downwards.
7. Repeat the entire process with the remaining hair strands.
Loading ...
Loading ...