GE - General Electric DDC4400SKMWH GE electric dryer

User Manual - Page 4

For DDC4400SKMWH.

PDF File Manual, 6 pages, Download pdf file

Loading ...
Loading ...
Loading ...
To Reduce the Risk of Injury
Never reach into the dryer while the drum is
moving. Before loading, unloading or adding
clothes, wait until the drum has completely
stopped.
Do not dry fiberglass articles in your dryer.
Skin irritation could result fl'om the remaining
glass particles that may be picked up by clothing
during subsequent dryer uses.
Close supervision is necessary if this appliance
is used by or near children. Do not allow
children to play inside, on, or with this
appliance or any discarded appliance. Dispose
of discarded appliances and shipping or
packing materials properly. Before discarding a
dryer, or removing from service, remove the
door of the dryer compartment.
Keep all laundry aids (such as detergents,
bleaches, fabric softeners, etc.) out of the reach
of children, preferably in a locked cabinet.
Observe all warnings on container labels to avoid
personal injury.
Keep the floor around wmr appliance clean and
dry to reduce the possiifility of slipping.
Never climb on or stand on the dryer top.
. If this is a gas dryer, it has an automatic electric
ignition, not a pilot light. DO NOT ATTEMPT
TO LIGHT WITH A MATCH. Burns may
result from having your hand near the burner
when the automatic ignition may turn on.
Dryer-applied Fabric Softeners or
Anti-static Conditioners
You may wish to soften your laundered fabrics
or reduce the static electricity in them. We
recommend you use either a fabric softener in the
wash cycle, according to the manufacturer's
instructions for those products, or try a dryer-added
product for which the manufacturer gives written
assurance on the package that their product can be
safely used in your dryer.
Service or performance problems caused by the use
of these products are the responsibility' of the
manufacturers of those products and are not covered
under the warranty of this appliance.
Loading ...
Loading ...