Loading ...
Loading ...
Loading ...
TECHNICAL INFORMATION
Specifications
To Restore Factory Settings
This procedure will reset your Sound+Sleep to its original “out of the
box” settings.
1. Turn off the Sound+Sleep
2. Press and hold the POWER button
3. Release the POWER button when the power lamp flashes once
Troubleshooting
Visit astisupport.com for more assistance.
Sound Categories
10
Sound Environments
30
Speaker Compensation
Five-band parametric EQ
Headphone Jack
3.5mm stereo
Power Requirements
5 Volts, 500 mA DC max
Power Consumption While Off
< 0.25 Watts
(typically 0.1 Watts)
Symptom
Possible Cause
Solution
No operation
when POWER
button is pressed
Disconnected power
plug
Check the power connection on
the bottom of the unit and at
the wall outlet. Make sure that
both are firmly seated.
Unit is connected to a
switched wall outlet
Move the unit to an un-
switched outlet.
Faulty wall outlet
Move to a working outlet.
Product needs to be
reset
See To Restore Factory
Settings
Unit is on, but no
sound is heard
Volume is set too low
Press or hold the VOLUME UP
button to increase volume
Headphones are
plugged in
Remove the headphones. The
speaker is muted when
headphones are connected.
Unit is on, but
volume is too low
Volume is set too low
Press or hold the VOLUME UP
button to increase volume
Adaptive Mode is
enabled
In Adaptive Mode, the sound
will be low when there is no
noise in the room. If you prefer
to maintain the sound at high
volume, turn off Adaptive Mode.
Volume is Too
High
Press or hold the VOLUME
DOWN button to decrease the
volume
Other unexpected
behavior
See To Restore Factory
Settings
Sound+Sleep Owner’s Manual
astisupport.com
Loading ...
Loading ...
Loading ...