Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/47184666-25344493703/bg21.png)
33
Problem
Ice maker is not
making enough
ice,
Icemakerwillnot
stopmakingice.
Ice maker is not
separating the
ice cubes.
Icehasbadodor
andtaste.
Automatic Ice Maker
Cause Correction
• Ice maker is producinf:l less ice than you
expect.
• Freezer is not cold enough.
• Household water line valve is not completely
open.
• Check to see if water dispenser is dispensinq
slower than normal.
• Icemakerwiresignalarmisbeinghelddown
bysomeiteminthe freezer.
• Ice cubes are not being used frequently
enough.
• Ice cubes are hollow or smaller than normal.
• Ice has picked up odor or flavor from strong
food stored in refrigerator or freezer.
• Water runninf:l to ice maker has poor taste or
odor.
• Ice not usedfrequently enough.
• Ice maker should produce approximately 4-5 pounds of ice every 24
hours. Rapid lce should produce up to 6 pounds of ice every 24
hours.
• See Problem section Temperatures Are Too Warm.
• Turn on household water line valve.
• If it is, replace the ice & water filter cartridge.
• Move item and release wire siqnal arm. Remove any ice cubes
frozen together over wire signal arm.
• Remove and shake ice bin to separate cubes.
• The ice & water filter cartridqe may be clogqed. Replace filter
cartridge.
• Cover foods tiqhtly. Discard stale ice. Ice maker will produce fresh
supply.
• Addfilter to water supply line. Consult a water purifying company.
• Discard stale ice.
Ice Dispenser
Problem Cause Correction
Dispenser will not • Water supply is not connected.
dispense ice. • Ice storage container is empty.
Icedispenseris
jammed.
Dispenser will not
dispense water.
• Freezer temperature is set too warm.
• Household water line valve is not open.
• Freezer door is not closed.
• Ice dispensinq arm has been held in for more
than 4-5 minutes.
• Ice has melted and frozen around auger due
to infrequent use, temperature fluctuations,
and/or power outages.
• Ice cubes are jammed between ice maker
and back of ice container.
• Ice cubes are frozen toqether.
• Ice cubes are hollow or smaller than normal.
• Water supply is not connected.
• Household water line valve is not open.
• Freezer door is not closed.
• Ice &water filter cartridge is clogged.
• Front filter not fully installed, if equipped
• Connect water supply (see page 9).
• When the first supply of ice is dropped into the container, the
dispenser should operate.
• Turn freezer control to a hiqher settinq so that ice cubes will be
made. When first supply of ice is made, dispenser should operate.
• Open household water line valve. Allow sufficient time for the ice to
be made. When ice is made, the dispenser should operate.
• Ensure freezer door is closed.
• Motor is overloaded. Motor overload protector will reset in
approximately 3 minutes. Ice can then be dispensed.
• Remove ice container, thaw, and empty the contents. Clean
container, wipe dry, and replace in proper position. When new ice is
made, dispenser should operate.
• Remove ice cubes that are lamminq the dispenser.
• Use the dispenser often so that cubes do not freeze together.
• The ice & water filter cartridf:le could be cloflqed. Replace the filter
cartridge. Dispensing system operates best at 30-100 psi water
pressure. Well water pressures should fall within this range.
• Connect water supply(see page 9).
• Open household water line valve. See Problem section Ice Maker Is
Not Making Ice.
• Ensure that freezer door is closed.
• Replace filter cartridge.
• Push filter inuntil you hear a "click." Filter should be flush with
cabinet.
Loading ...