Loading ...
Loading ...
Loading ...
Generic Operation
1. Turn OFF the ignition of the vehicle.
LEAK TEST OF VEHICLE SYSTEMS REQUIRES THE ENGINE TO BE OFF.
2. Dismantle the air filter and the throttle connections.
3. Clean the inner wall of the intake opening to avoid sharp objects and put the Universal Intake
Adapter into the opening.
4. Connect the Power Cord to 12V vehicle battery.
5. Now the Power LED would be ON, if else check the power supply.
6. Introduce the smoke nozzle into the system via the Adapter Cone.
7. Press Air Control Switch, wait for 30 seconds until the system is pressurized, and check the
Pressure Gauge & Flow Meter reading for leak status, if the unit is equipped with Pressure Gauge
& Flow Meter.
9. Press Smoke Control Switch, .unplug and Plug back the smoke nozzle back into the Cone
Adapter when there’s obvious smoke coming out of the smoke nozzle.
10. The system will be ready for leak check in 2 minutes. Use a bright light torch or working lamp
to assist.
11. After test, press Smoke Control Switch again to stop the unit from generating smoke and
press Air Control Switch to stop generating pressurized air.
12. Collect the Smoke Hose and the Power Cord with the Velcro Straps for storage. Hang the unit
or make it stand in UPRIGHT position only. Do NOT lay it down.
Warranty
1. The main unit entitled free warranty since the date of purchasing up to 12 months.
2. All accessories entitled free warranty since the date of purchasing up to 6 months, except the
Intake Bladders.
3. Any damage to the machine caused by misuse, or improper operation, is not covered by
warranty.