Loading ...
Loading ...
Loading ...
Section 4 - REPAIR & ADJUSTMENTS
WARNING I
Before attempting any adjustments or repairs, STOP I
the engine, remove the spark plug wire from the I
spark plug and secure wire away from plug. I
4.3.1. Cleaning Drive Disc & Driven Disc.
If oil or grease on the drive disc or driven disc is
causing slippage, clean discs as follows:
1. Wipe away any oil or grease with a clean cloth.
2. Use either an approved grease solvent or hot,
soapy water to clean drive disc or driven disc.
3. Rinse components with clean water.
4. Dry components with a clean cloth.
4,3.2, Drive Spring Repair/Replacement
If drive spring is loose, reconnect as shown in Figure
4.7. If spring is broken, replace with new spring.
USE
NEEDLE _ Xk
\
FIGURE 4.7
1, Place shift rod in the number six speed position.
See Figure 4.8.
MOVEGROUND _\\l I
REYCLING MODEL SHOWN
SPEED CONTROL TO
SIX SPEED POSITION (ROPE START MOUNTED ON
NDLE)
;IXTH
FIGURE 4.8
2. Remove driven disc spring from driven alsc
assembly. Loosen connector hex nut. See Figure 4.9.
DRIVEN DtSC ._
SPRING !
CONNECTOR _J
DRIVEN DISC
_- ASSEMBLY
CONNECTOR_
HEX NUT
DRIVE
F DISC
FIGURE 4.9
4.3.3. DRIVEN DISC ADJUSTMENT
If the drive disc and driven disc are clean and the
mower drive is still slipping, adjust the driven disc as
follows:
13
Loading ...
Loading ...
Loading ...