Loading ...
Loading ...
Loading ...
- 5 -
04/2020
Copyright © 2020, Fast ČR, a.s.
EN
Hand mixer
User'smanual
■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
In the event that you hand this appliance over to somebody else, make sure to also
include this user'smanual.
■ Carefully unpack the appliance and take care not to throw away any part of
the packaging before you find all its parts. We recommend saving the original
cardboard box, packaging material, purchase receipt and responsibility statement
of the vendor or warranty card for at least the duration of the legal liability
for unsatisfactory performance or quality. In the event of transportation, we
recommend that you pack the appliance in the original box from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Turbo button for maximum beating/
kneading speed
A2 Switch for setting speeds and
turning off
It enables six speed levels for all
types of recipes
A3 Button for the release of beater/
kneading attachments
A4 Motor unit
A5 Removable attachments mounting
holes (underside)
A6 Set of stainless steel kneading
attachments
They are appropriate for kneading
bread dough, fresh dough for pasta,
pizza or biscuits, puff dough, etc.
A7 Handle
A8 Power cord
A9 Set of stainless beater attachments
They are suitable for beating and
whipping creams, mashed potatoes,
batters, spreads, egg whites and
yolks, etc.
APPLICATION OF THE HAND MIXER
■ The hand mixer is intended for beating and kneading a standard amount of
ingredients in the household.
■ Food is processed using two types of stainless steel attachments that are easy to
wash and replace.
BEFORE FIRST USE
■ Before first use, thoroughly wash the attachments A6 and A9, using warm water and
neutral kitchen detergent. Then rinse everything with clean water and allow it to dry
naturally or dry it out thoroughly using awiping cloth. All the attachments are also
suitable for washing in adishwasher.
■ Use adry wiping cloth to wipe the outside parts of the motor unit A4.
Attention:
Do not rinse the motor unit A4 and its power cord under water or
submerge it in water. The motor unit is not designed to be washed
in adishwasher.
OPERATION
ASSEMBLY
■ Before you start assembling the appliance, check that the switch A2 is set to position
0 (off) and that the motor unit A4 is disconnected from the power socket.
■ Select the attachment types suitable for the intended task and insert them into the
holes A5 on the underside of the motor unit according to the following instructions:
– The mounting parts of the beater attachments A9 are identical and can thus be
mounted in either of the holes on the underside of the motor unit.
– The mounting parts of the beater attachments A6 differ. The attachment with
the ring can only be mounted in the larger hole on the underside of the motor
unit, the attachment without the ring can only be inserted into the smaller hole.
Be careful not to interchange the attachments or attempt to insert them into the
incorrect holes.
■ Push the selected attachments in until they safely click into position.
Attention:
Always only install two attachments of the same function into
the hand mixer – always either two beater attachments or two
kneading attachments. Never insert two different types of
attachments, otherwise the hand mixer will be damaged.
TURNING ON AND BEATING
■ Place the food and liquids that you wish to process into asufficiently large container.
■ Plug the power cord of the hand mixer into an electric power socket.
■ Submerge the attachments into the container and then start the hand mixer by
setting switch A2 to the required speed level in the range from 1 to 6.
■ We recommend to start at a lower speed and to increase it gradually. You can
change the speed setting even while the mixer is running. We recommend that
runny doughs and sauces are processed at lower speed levels; this will prevent
ingredients from splashing out of the bowl.
Attention:
The hand mixer is designed for short operation lasting no longer
than 5 minutes. After this time has elapsed, turn off the mixer and
allow the motor unit to cool down. The hand mixer can be used
again after 2 minutes.
Items such as spoons, kitchen knives, forks, etc. must not be
placed into the container while mixing as this could result in injury
or damage to the hand mixer.
■ If you wish to mix at the highest level, press the TURBO button. To prevent the
appliance from overheating, do not use this button for longer than 30 seconds.
TURNING OFF AND REMOVING THE ATTACHMENTS
■ After you have finished using the appliance, set switch A2 to position 0 (off) and
disconnect the power cord from the power socket.
■ Make sure that the rotating parts have stopped rotating and remove the
attachments from the container.
■ Press button A3 to release the attachments. The attachments can only be released
when the switch is in position 0. When the switch is in positions 1–6, the attachments
are locked in position against removal.
■ Remove and clean the used attachments according to the instructions in chapter
Cleaning and maintenance.
OVERHEATING PROTECTION
■ The hand mixer is equipped with an overheating protection fuse. When it is used for
longer than 5 minutes or when very tough ingredients are mixed and the motor unit
heats up to ahigh temperature, the hand mixer will turn off automatically. In such
acase, pull out the power plug and allow the hand mixer to cool down sufficiently.
Then you can put it into operation again.
CLEANING AND MAINTENANCE
Attention:
Prior to cleaning or maintenance, always disconnect the hand
mixer from the power supply and allow it to cool down completely.
Attention:
The motor unit and its power cord are not intended for washing
in adishwasher.
Do not spray these parts with water or any other liquid or
submerge them in water or any another liquid.
■ Thoroughly wash the removed attachments using warm water and neutral kitchen
detergent. Then rinse all these parts with clean water and dry them thoroughly with
afine wiping cloth. The attachments can also be washed in adishwasher.
Attention:
The attachments are intended for short term contact with food
(including beverages), i.e. max. 4 hours. To prevent damaging their
surface, do not leave them submerged, for example in water for
extended periods of time.
■ To clean the outer surface of the motor unit, use acloth lightly dipped in aweak
detergent solution. After applying the detergent solution, wipe the surface with
acloth lightly dampened in clean water and then wipe dry.
Attention:
Never use chemicals, dishwashing wool, steel wool or cleaning
agents with an abrasive component since these may seriously
damage the surface of the unit.
STORAGE
■ Before storing it, the hand mixer must be completely cool, turned off and
disconnected from the power supply, clean and dry.
■ Store the motor unit and the attachments in a clean, dry place out of reach of
children.
Attention:
Keep the stored hand mixer away from extreme temperatures,
direct sunlight and excessive humidity and do not store it in an
overly dusty environment. Do not place anything on to the hand
mixer.
Loading ...