Loading ...
Loading ...
Loading ...
B. REMOVE SHIPPING STRAP
I l'+I+'j'++m++""[_ i[_ it'll
Removing the shipping strap is
necessary for smooth operation.
If the shipping strap is not
removed, the washer will make
excessive noise.
To prevent floor damage, set washer
onto cardboard before moving across
floor. Move washer close to its final loca-
tion.
STEP 1. Do not cut yellow strap, Pull
yellow strap firmly, until completely
removed from washer. Depending on
your model, there should be either two
or three cotter pins on the end of the
shipping strap when it is pulled out of
the washer. The electrical plug is
attached to this shipping strap.
Electricalplug
Shippingstrap
STEP 2. Pull firmly to remove the
other end of the shipping strap pinned
to the back of washer. This will
release the rear self-leveling legs.
Ir
\ PULL
STEP 3. Cut the shipping strap about
16 inches (40 cm) from plug end. Look
for the words "CUT HERE," Discard end
with the cotter pins, Slide remainder of
shipping strap free from the electrical
plug. You will use this to secure the drain
hose.
O O
PULL
Pin
14
Loading ...
Loading ...
Loading ...