Loading ...
Loading ...
Loading ...
3
N(1)
2
INDOOR UNIT A
white
(blue)
black
red
(brown)
green
( )
yellow-
green
L2L1
POWER
L1
L2
yellow-
green
3
N(1)
2
INDOOR UNIT B
white
(blue)
black
red
(brown)
green
( )
yellow-
green
3
N(1)
2
INDOOR UNIT C
white
(blue)
black
red
(brown)
green
( )
yellow-
green
ELECTRICAL CONNECTIONS INSTALLER
5
Wrong wire connection may cause malfunction of
some electric components.After fixing cable, ensure
that leads between connection to fixed point have
some space.
An all-pole disconnection switch having a contact
separation of at least 3mm in all pole should be
connected in fixed wiring.
2. Remove the cable clamp, connect the power con
-nection cable with the terminal at the row of conn
-ection and fix the connection. The fitting line distr
-ibuting must be consistent with the indoor unit.
terminal of line bank.
Wiring should meet that of indoor unit.
3. Fix power connection wire by wire clamp.
4. Ensure wire has been fixed well.
5. Install the handle.
1. Remove the handle at the right side plate of the outdoor
unit (one screw).
The connection pipes and the connectiong wirings
of the unit A and unit B must be corresponding to
each other respective.
Note: the above figures are only intended to be a simple
diagram of the appliance and may not correspond to the
appearance of the units that have been purchased.
The appliance shall be installed in accordance with
national wiring regulations.
Power cord
L1 L2
To the power supply
To unit A
connecting
cable
To unit B
connecting
cable
To unit C
connecting
cable
TM24H4O
TM30H4O
TM36H4O
TM24H4O
Loading ...
Loading ...
Loading ...