Loading ...
Loading ...
Loading ...
4
Many thanks to select our model, please read and reference this manual carefully before
operation. Please keep the manual for future operation reference.
Control locations
1- Set button; 2- Alarm1 button; 3- Alarm2 button; 4- Display; 5 -Previous button;
6-Next button; 7- Play/pause button; 8- DC IN jack; 9- Bass reflex;
10- Backup battery compartment; 11- Antenna; 12- Standby button; 13 - Sleep button;
14- Mode/dimmer button;
Power on clock radio
Insert the AC/DC adaptor to any 230V AC household outlet. Then insert the DC jack to the
backside of the unit. The display will light up and ready to work. Short press the standby button to
enter radio or standby mode; long press the standby button to power off(display off )/on the unit.
Backup battery installation
The radio requires 1 x CR2025 type battery(not included) to provide backup power for setting
memory in the event of a temporary power interruption.
Place the unit face down on a flat and soft surface; use a coin to turn the battery cover under anti-
clockwise direction at the back of the unit; insert one new cell CR2025 battery into the battery
compartment by observing the “ +” polarity facing upward; Replace the battery cover and turn to
clockwise direction to lock it. The time and all settings will be kept in case of AC power
interrupted, but the backup battery is available.
Please kindly disposal the power-exhausted battery in environmental friendly way accord to your
local government requirements. Make sure a fresh CR2025 battery is used, and a fresh battery
could backup clock continuously for around 3weeks.
Display brightness adjustment/Dimmer: long press(2 seconds) mode button repeatedly to
switch and select the display brightness between high/low/off level.
Clock time setting: In standby mode, short press the set button to select 12/24 hours format.
Long press(2 seconds) the set button to start time setting procedure, and the hour digits will flare
on display. Press previous/next button to adjust the desired hour, press and hold it to accelerate
the adjustment in high speed. Short press play/pause button to confirm and skip to minute
setting. Press previous/next button to adjust it, then press play/pause button to finish it.
Loading ...
Loading ...
Loading ...