Loading ...
Loading ...
Loading ...
13
II. Installation and Operating Instructions
WARNING
1. This icemaker must be installed in accordance with applicable national, state,
and local codes and regulations.
2. CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews
are securely in place after installation. Make sure that none have fallen into
the storage bin.
A. Checks Before Installation
•Visuallyinspecttheexterioroftheshippingcontainerandimmediatelyreportany
damage to the carrier. Upon opening the container, any concealed damage should also
be immediately reported to the carrier.
•Removetheshippingcarton,tape,andpackingmaterial.Ifanyareleftintheicemaker,
it will not work properly.
•Removethepanelstopreventdamagewheninstallingtheicemaker.See"II.B.Howto
RemovePanels."
•Removethepackagecontainingtheaccessories.
•Removetheprotectiveplasticlmfromthepanels.Iftheicemakerisexposedtothe
sun or to heat, remove the lm after the icemaker cools.
•Checkthattherefrigerantlinesdonotrubortouchlinesorothersurfaces,andthatthe
fan blade (if applicable) turns freely.
•Checkthatthecompressorissnugonallmountingpads.
•Seethenameplateontherearpanel,andcheckthatyourvoltagesupplied
corresponds with the voltage specied on the nameplate.
•Thisicemakercanbeinstalledonacountertoporonanoptionalstand.Ifusingan
optional stand, Hoshizaki Stand SD-700 or SD-750 is recommended. For further
options, contact your local Hoshizaki distributor.
•Thedriptrayonthefrontoftheicemakerisremovableforinstallationsusingan
in-counter drain. Drip tray removal requires HS-5003 for DCM-751 B_H or HS-5002 for
DCM-751B_H-OS.
DCM-751 on
Hoshizaki Stand SD-700
DCM-751 on
Hoshizaki Stand SD-750
DCM-751B_H with
DripTray Removal Kit
HS-5003
DCM-751B_H-OS with
DripTray Removal Kit
HS-5002
Loading ...
Loading ...
Loading ...