Loading ...
Loading ...
Loading ...
©2018 Hestan Commercial Corporation
31
TESTING AND INITIAL START UP
INITIAL START UP
(continued)
Having already plugged in the refrigerator, the initial indicator that
it is powered up is to see “Stand by” in the display.
To turn on all the appliance by pressing the Power button for three
seconds. The display will show the message “Initial test” for approximately
2 minutes. After this phase the compressors will start up and remain on until the
preset default temperature set at the factory is reached. Allow ample time for
the refrigerator to reach this temperature before loading any items (up to 6-12 hrs).
make sure that the water filter is properly installed. The ice maker system
will begin operation once the appliance is turned on and will begin an
Ice Maker on again by touching the button.
For further information about the appliance operation, refer to the Use and Care Manual.
If the refrigerator is provided with an ice maker, prior to turning it on
initial cleaning procedure. Once the procedure has completed, turn the
If at rst the Start Up message does not appear but other information
in the display do appear (such as Fridge too warm, Freezer too warm, or
sound signals are activated), the refrigerator has still begun the
normal cooling process.
If this is the case, deactivate any audible signals by pressing the Alarm button,
close the door and wait until the set temperature is reached.
It is necessary to let the unit reach the correct temperature prior to
food or beverages (up to 6-12 hours).
EN
Loading ...
Loading ...
Loading ...