Loading ...
Loading ...
Loading ...
Move ON/OFF switch bcated on the front panei of
the engine to the "ON" position.
ON/OFF Switch
CHosefuei shut-off vaive.
k
\
You MUST unplug any load
from the generator before starting to prevent
permanent damage to any appliances.
Grasp handb on rope starter and puU dowiy untii
resistance is feit. Let the rope rewind showily. PuU
rope with a rapid fuU arm stroke. Let rope rewind
dewily. Repeat if necessary.
When engine starts, graduaUy move the choke to
the "NO CHOKE" position.
iMPORTANT: AUow generator to run at no ioad for 5
minutes upon each initiai start-up to aUow engine and
STOPPING ENGmNE
Disconnect all electrical loads.
Turn ON/OFF switch to "OFF" position.
\
ON/OFF Switch
NOTE: When engine is transported, close fuel shut-
off valve to prevent leakage.
IMPORTANT: Never store engine with fuel in tank,
indoors, or in enclosed, poorly ventilated areas or
where fuel fumes may reach an open flame.
CONNECTmNG ELEOTRmCAL LOADS
Let engine run and warm up for five minutes after
starting with no electrical load.
Connect loads in the following manner to prevent
damage to equipment:
Connect inductive load equipment first, inductive
loads consist of refrigerators, freezers, water
pumps, air conditioners, or small hand tools.
Connect the items that require the most wattage
first.
Connect the lights next.
Voltage sensitive equipment should be the last
equipment connected to the generator. Plug
voltage sensitive appliances such at TV's, VCR's,
microwaves, ovens, computers, and cordless
telephones into a UL listed voltage surge protec-
tor, then connect the UL listed voltage surge
protector to the generator.
IMPORTANT: You should always add up the rated
watts of all lights, tools and appliances you are
powering at one time. This total should not
exceed the rated capacity of you generator or
circuit breaker rating of the receptacle supplying
power.
13 -- ENG NGP6700s0
Loading ...
Loading ...
Loading ...