Loading ...
Loading ...
Loading ...
en-us Operation
18
6.12 Wipe protection
With this function you can avoid changing the settings
while cleaning the control panel during cooking.
This function does not lock the main switch. You can turn
the cooktop off at any time.
Activating wipe protection
▶
Touch panel lock.
a The indicator above panel lock lights up.
a The control panel is locked for 35seconds.
a After 30seconds a beep indicates that the wipe protec-
tion is about to turn off.
Deactivating wipe protection
▶
Touch panel lock.
a The indicator above panel lock goes out.
6.13 Basic settings
You can configure your appliance to meet your needs.
Basic settings overview
Here you can find an overview of the basic settings and
the preset factory settings.
Display Function
Panel lock
– Manual
1
– Automatic
– Function deactivated
Signal tones
– Confirmation signal and error signal are
off. The main switch signal remains on.
– Only error signal is on.
– Only confirmation signal is on.
– Confirmation signal and error signal are
on.
1
Display energy consumption
– Deactivated.
1
– Activated.
Duration of timer end signal
– 10seconds
1
– 30seconds
– 1minute
Power management function. Limiting the to-
tal power of the cooktop. The available set-
tings depend on the maximum power of the
cooktop.
– Deactivated
1
,
2
– 1.000W minimum power
– 1.500W
...
– 3.000W recommended for 13A
. – 3.500W recommended for 16A
– 4.000W
. – 4.500W recommended for 20A
...
or . – Maximum power of the cooktop
2
1
Factory setting (may vary according to model)
2
The cooktop's maximum power output is shown on the
rating plate
Display Function
Time for setting a cooking zone after selec-
tion
– Unlimited: The last selected cooking zone
remains selected. You can adjust the settings
without having to select it again.
– Limited: You can adjust the settings for
the selected cooking zone within 10seconds.
After 10seconds you have to select the
cooking zone again.
Results for suitability test for cookware
– Not suitable.
– Not ideal.
–Suitable.
Restore factory settings
– Off
1
– Restore appliance to factory settings
1
Factory setting (may vary according to model)
2
The cooktop's maximum power output is shown on the
rating plate
Changing the basic settings
Requirement:The cooktop is turned off.
1. Turn on the cooktop.
2. Within the next 10seconds, press kitchen timer for
about 4seconds.
The first four displays provide the product information.
To call up the individual displays, touch the control
panel.
Product information Display
Customer Support index (CI)
Production number
Production number1
Production number2 .
3. Press kitchen timer to access the basic settings.
a In the left display and flash alternately.
a In the timer display
lights up.
4. Press kitchen timer repeatedly until the desired setting
lights up in the left display.
5. Set the desired option in the settings area.
Loading ...
Loading ...
Loading ...