Loading ...
Loading ...
Loading ...
SECTION 2.7
6
2.7 Low Battery
When the battery is in seriously low condition, LOCKLY
®
will make continuous beeping sounds in
addition to the flashing low battery icon on the touch screen. You should replace batteries
immediately to avoid your smart lock from shutting down.
When your smart lock low-battery warning alert finally dies, video doorbell and recording will be
disabled. You will have few more chances to unlock your smart lock either by a password, LOCKLY
APP or fingerprint. If the unlock was successful, the low-battery warning alert will be on for 1
minute. After which, the smart lock will go to dead-battery mode and will lock auto lock in 5
seconds and the screen will display a low-battery icon.
Dead Battery
Condition Indicator Solution
Low Battery
Battery Icon on the display
keypad will light up to indicate
low battery.
Replace batteries immediately to
avoid battery failure. LOCKLY
Secure can still operate up to 300
cycles in low battery condition.
When there is no display and
sounds; and screen is non-functional.
Replace batteries immediately.
Supplied physical backup keys
can be used to unlock the door.
Alternatively, use a 9V battery as
shown below to temporarily
activate the lock.
Your LOCKLY will automatically
detect battery
polarity. So hold your 9V
battery lead in place
against bottom of
the LOCKLY to temporarily
activate
t
he screen to enter your Access Code.
Be sure to hold the 9V battery against
the
contact points located at the bottom
of the
lock until you have successfully
unlocked your
door with your Access
Code. Once unlocked,
batteries should
be replaced immediately.
9V Battery
-
+
Loading ...
Loading ...
Loading ...