Loading ...
Loading ...
Loading ...
Thetemperatureintheovenhasbeenpre-setatthefactory.Whenfirstusingtheoven,be
suretofollowrecipetimesandtemperatures.Ifyouthinktheovenistoohotortoocool,the
temperatureintheovencanbeadjusted.Beforeadjusting,testa recipebyusinga
temperaturesettingthatishigherorlowerthantherecommendedtemperature.Thebaking
resultsshouldhelpyoutodecidehowmuchofanadjustmentisneeded.
INSTRUCTIONS PRESS
To adjust the oven temperature higher:
1. Press for 6 seconds (Fig. 1).
2. To increase the temperature use the number pads to enter the
change. (Example 30°F) (_)(_)(Fig. 2). The 1_)(_
desired
temperature may be increased as much as 35°F (19°C).
3. Press4 to accept the temperature change and the display
will return to the time of day (Fig. 3). Press c/_f_ to reject the @
change if necessary.
To adjust the oven temperature lower:
1. Press, for 6 seconds (Fig. 4).
2. To decrease the temperature use the number pads to enter the
desired change. (Example-30°F) (_)(_) and then press
@@@
(Fig. 5). The temperature may be decreased as much as
35°F(19°C).
3. Press_ to accept the temperature change and the display
will return to the time of day (Fig. 6). Press @ to reject the @
change if necessary.
Note: Theoven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle tern peratu re.
DISPLAY
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Changing the Oven Light
Oven
Light
Win
Holder
The oven light bulb is located at the rear of the oven and is covered with a glass shield held by
a wire holder. The glass shield must be in place whenever the oven is in use.
To replace the oven light bulb:
1. Turn electrical power off at the main source or unplug the range.
2. Press wire holder to one side to release the glass shield.
3. Replace bulb with a new 40 watt appliance bulb.
4. Replace glass shield over bulb and snap wire holder into place.
Turn power back on again at the main source (or plug the range back in).
The clock will then need to be reset. To reset, see Setting the Clock,
Be sure the range is unplugged and all parts are COOL before replacing oven
light. Wear a leather-faced glove for protection against possible broken glass.
31
Loading ...
Loading ...
Loading ...