Loading ...
Loading ...
Loading ...
Upper Pulley_
Half
Tab It
_ .. \_>_ _ Lower Pulley
_e;r d Pin.___j_ Half
Lower Pulley
O O
Belt
Belt
Guard Pin
Figure 20
• Pivot the control arm back to its original position
and reinstall the six-speed cable into the slot.
See Figure 21.
• Check and make sure the belt is routed inside the
pulley halves and the belt guard pin.
Six-Speed
Cable Slot
• Reinstall the bolt securing transmission to rear
mower housing.
• Pivot the baffle back to its original position and
secure with three hex screws removed earlier.
• Lightly lubricate the inside of the blade adapter and
reinstall the spacer, wave washer, blade adapter
assembly, and blade in the correct order.
• Tighten the hex bolt to secure the blade to torque:
450-600 in. Ibs.
StoringyourLawnMower
The following steps should be taken to prepare your
lawn mower for storage.
• Clean and lubricate mower thoroughly as described
in the lubrication instructions.
IMPORTANT:We do not recommend the use of a
pressure washer or garden hose to clean your unit.
• Refer to engine manual for correct engine storage
instructions.
• Coat mower's cutting blade with chassis grease to
prevent rusting.
• Store mower in a dry, clean area. Do not store next
to corrosive materials, such as fertilizer.
NOTE: When storing any type of power equipment in a
poorly ventilated or metal storage shed, care should be
taken to rust-proof the equipment. Using a light oil or
silicone, coat the equipment, especially cables and all
moving parts.
L_
ArmControl /_
Figure 21
16
Loading ...
Loading ...
Loading ...