Loading ...
Loading ...
Loading ...
9
6. If the ice maker is full of ice, the unit will automatically stop making ice
and the FULL ICE indicator light will turn on.
7. Change the water in the water reservoir every 24 hours. If the unit will not
be in use for an extended period of time, drain all of the water left in the
water reservoir.
8. Periodically check to make sure the water filter is free from dust or
particles. The water filter is located on the bottom of the large water
reservoir and internal water tank.
9. After shipping or moving the unit, allow the refrigerant inside the
compressor to settle for at least 3 minutes before restarting the ice maker.
ADDITIONAL OPERATING TIPS
1. Clean the ice maker’s interior (water reservoir, etc.) with lukewarm water
and a soft cloth.
2. Position your ice maker away from direct sunlight and other heat sources
such as stoves, furnaces and radiators. Place the ice maker on a flat, level
surface and make sure there is at least 6 inches of space in between the
back and sides of the ice maker and the wall.
3. Allow the refrigerant inside the ice maker’s cooling system to settle for
approximately one hour before plugging your ice maker in for the first
time.
4. Make sure the ice maker’s plug is fully accessible.
Loading ...
Loading ...
Loading ...